Current HELOC guidelines, updated from one source.
This snapshot carries the primary-residence tier, with the second-home and investment floors beside it: the leverage ceiling, the credit floor, the line range, and the draw and repayment periods, each read from Lendmire’s guideline source and refreshed when the programs move.
Of the home’s value, first mortgage included
Up to 90% combined loan-to-value is the primary-residence ceiling at the top tier; the tier ladder below shows how the ceiling and the line cap step down with the credit profile.
Credit score to start
Scores from 600 are eligible on a primary residence, with the smallest ceiling and cap; the ceiling and the cap step up with the credit tier, and a debt-to-income ratio above the reduced band needs a stronger profile.
Automated valuation on lines to $500,000
The program writes lines from $25,000 to $750,000; up to $500,000 the valuation is ordinarily automated, and the largest lines, above that threshold, require a full appraisal on a primary residence.
Interest-only, then 17–25 years of repayment
3–5 years to draw, 17–25 years to repay: the two wholesale programs behind the table trade leverage for runway, and the file lands on whichever offers the stronger cell at the credit tier.
| Credit profile | Max combined LTV | Max line | Valuation |
|---|---|---|---|
| 720+ | 90% | $500,000 | Automated valuation |
| 720+ | 75% | $750,000 | Full appraisal; primary residence only |
| 700+ | 85% | $500,000 | Automated valuation |
| 700+ | 75% | $750,000 | Full appraisal; primary residence only |
| 680+ | 85% | $500,000 | Automated valuation |
| 660+ | 85% | $500,000 | Automated valuation |
| 640+ | 80% | $500,000 | Automated valuation |
| 620+ | 70% | $400,000 | Automated valuation |
| 600+ | 60% | $400,000 | Automated valuation |
The 90% combined loan-to-value ceiling requires a 720 credit profile; lower tiers carry lower ceilings or smaller line caps, as the table shows. Second homes start at a 640 profile; investment property requires 700 and caps at 70% combined loan-to-value. Lines above the automated-valuation range: $750,000 at 75% with a full appraisal (700+ credit profile).
Current HELOC snapshot · updated August 31, 2026 · seven credit tiers on a primary residence · variable rate through the draw and repayment periods · at least 75% of the line drawn at closing · first or second lien position · no prepayment penalty · no entity vesting.
Informational only; not a commitment to lend, an approval, or a quote. Every program figure on this page is a wholesale program parameter read from Lendmire’s guideline source and may change without notice, and the market figures are U.S. Census estimates; eligibility, the line amount, the combined loan-to-value, and the structure depend on the credit profile, the valuation, the occupancy, the state, the selected program, and full underwriting. A licensed loan officer provides the terms for a specific line in writing. Licensed in sixteen states for consumer mortgages. Lendmire, LLC, NMLS #2371349. Equal Housing Opportunity.
What a home equity line of credit is — and how the line is sized.
A home equity line of credit is a revolving lien, usually in second position: the home secures it, the line is sized from the equity, and the balance moves as you draw and repay. The pieces that decide the line in Billings are the value, the balance already on the home, the credit tier, and the occupancy.
For the program overview, see Lendmire’s home equity line of credit program, or the statewide guide at HELOC in Montana.
A line you draw on, not a lump sum
Unlike a closed-end loan, the line stays open through the draw period: draw for a Billings renovation this year and a tuition bill next year, pay interest only on the drawn balance, and repay over the years after the draw period ends.
Equity and the combined loan-to-value ceiling
Available equity is the gap between the ceiling and the balance already on the home. A Billings home with a small first mortgage has a large gap; a recently purchased home with a high balance may have little room under the ceiling even at the top tier.
Your credit tier sets the ceiling and the cap
The program is a ladder: the higher the credit profile, the higher the combined loan-to-value ceiling and the larger the maximum line. A Billings owner at the top tier reaches the full ceiling; the tiers below it carry smaller ceilings or smaller caps, down to the floor.
Valuation, verification, and closing
Most Billings lines are valued by an automated model, with a secondary valuation at higher leverage and a full appraisal above the program’s threshold. Income is verified electronically first, through payroll-database matches or borrower-permissioned account connections, with documents as the fallback.
This is the same math the lender runs on a Billings file. The only moving parts are the value, which comes from the valuation, the balance, which is whatever the payoff statement says, and the tier, which the credit report decides.
Billings’ equity in figures — and how a line fits it.
Before the calculator, the context: how many Billings households own their homes, what those homes are worth on the latest estimate, and what households earn. Each figure shapes the size of a typical line.
Citywide figures provide general market context, not an appraisal or an income calculation. Household income matters for the debt-to-income ratio, value for the ceiling, and the balance for the gap underneath it; the Census tells you the market, the file tells you the line.
Data sources: U.S. Census Bureau — ACS 5-Year (2024) housing and population estimates, including tenure, home values, gross rents, and household income.
Distinct Billings neighborhoods, distinct equity pictures.
Within Billings, a HELOC on a condominium, a decades-old family home, and a newer subdivision house are three different files: different valuation paths, different association questions, different equity depth.
Established close-in neighborhoods
Long tenure is what makes a large line possible in Billings: an older first mortgage, mostly paid down, leaves most of the value available under the ceiling. These are the files that reach the cap rather than the ceiling. About 35% of Billings’ households rent — roughly 17,935 renter households on the latest Census estimate.
Newer infill and recent purchases
Infill rows and recently purchased Billings homes carry high balances relative to value, so the room under the ceiling is thin: the tier decides whether a worthwhile line exists at all, and the minimum line can be the binding limit. The median owner-occupied home value in Billings runs near $343,400 on the latest Census estimate.
Two-to-four-unit homes
Small multi-unit homes are a Billings specialty, and the longer-runway program takes them with a higher floor than a house. Rental income can be documented by lease or return, and the vesting must be individual or a revocable living trust rather than an entity. Billings is home to about 119K people.
Condominiums and townhomes
Townhomes and condominiums near the Billings core are routine files. Dues are part of the ratio math, project warrantability is handled on the program side, and a condotel is one form the program will not take. Roughly 33,059 Billings households own their homes on the latest Census estimate — 65% of all households, the pool a home equity line is written for.
Luxury and high-value homes
A high-value Billings primary residence can reach the program’s largest line, but the lane changes above the threshold: the ceiling drops, the credit floor rises, and an appraiser replaces the model. Second homes and rentals cap lower. Median household income in Billings sits near $73,712 on the latest Census estimate.
Historic districts under renovation
Older Billings homes being restored carry two values: the one the model sees today and the one the finished work will support. The line is sized on the first; the second arrives with an appraisal on a larger line later. On a one-unit principal residence at Billings’ median value, the primary-residence ceiling puts total liens near $309,060 — the line is what remains after the first mortgage balance; a second home starts at a higher credit floor and matches the primary column at the top tier, and a rental caps lower at every tier.
The property drives the file as much as the credit: the program accepts single-family homes, condominiums, townhomes, and small multi-unit homes with their own conditions, while manufactured homes, co-ops, mixed-use buildings, and homes vested in an entity are outside it.
Four ways Billings homeowners put a home equity line to work.
Billings owners open home equity lines for a handful of reasons that repeat: the renovation, the higher-cost debt worth consolidating, the next property, and the large expense that arrives on its own schedule.
Consolidate higher-cost debt
Consolidation is one common use of the program in Billings: equity pays off unsecured balances, the owner manages one line, and the first mortgage is untouched. The decision turns on discipline, because the house is the collateral.
Bridge the move between homes
A Billings owner who wants to buy the next home before listing the current one draws the down payment from a line, closes, and retires the balance from the sale proceeds. On the higher-leverage program the line must be in place before the home is listed.
Cover a large planned expense
Tuition, a medical bill, a wedding, a business need: a Billings owner sizes the line to the expense, takes the closing draw when the bill is near, and repays over the years that follow. A balance paid down can be drawn again for the next one.
Renovate and repair without a refinance
A kitchen, a roof, an addition: the work is staged and invoices arrive over months. A Billings owner draws at least seventy-five percent of the line at closing, draws the rest as each phase bills, and keeps the first mortgage where it is.
Estimate your Billings home’s available credit line before requesting a quote.
The calculator applies the program tables to a Billings scenario: enter the home’s value and the balance secured by it, pick the credit tier and the occupancy, and it returns the available line, the equity position, the combined loan-to-value before and after the draw, the minimum draw at closing, and the valuation path. Nothing here is a rate or a payment; those come in writing from a licensed loan officer.
Billings available-equity calculator
Starting assumptions reflect a typical Billings home value and a mid-hold mortgage balance. Replace them with your own figures.
Illustrative starting assumptions: a $345,000 home value near Billings’ median owner-occupied home value and a $170,000 modeled remaining first-mortgage balance (U.S. Census Bureau). Combined loan-to-value ceilings and line caps follow the current program tables for the occupancy and credit tier selected and update from Lendmire’s centralized guideline source on the live page. Every field is editable.
Illustrative estimate only — not a credit decision, approval, quote, or commitment to lend. The actual line amount, combined loan-to-value, and eligibility depend on the automated valuation or appraisal, the credit profile, occupancy, documentation, and full underwriting by the selected wholesale lender; the rate, the payment, and any costs are provided in writing by a licensed loan officer. Minimum score, line-size, and draw requirements follow the current program snapshot shown on this page. Licensed in sixteen states for consumer mortgages.
Same equity, four very different ways to use it.
The right structure depends on the first mortgage, the size and timing of the need, and whether the owner wants a balance that revolves or one that is fixed. Four options, side by side.
A line, a refinance, a closed-end second, or unsecured credit.
Open-ended by design: a credit limit secured by the home, a draw period of interest-only payments, and a repayment period after. The Billings owner who wants flexibility, and who has a first mortgage worth keeping, chooses this.
One mortgage, one closing, cash in hand: a cash-out refinance is the simplest structure, and the most consequential, because it replaces the first lien entirely. The amount of equity it reaches depends on the size of the new loan. For the first-mortgage route, see Lendmire’s refinance program.
A second mortgage that funds once in a lump sum and amortizes from the first payment. No draw period, no revolving balance. It fits when the Billings need is a single known amount, such as one contractor bid, and the owner wants a fixed schedule from day one.
Unsecured credit fits small, short needs and asks nothing of the home; it costs more and caps lower, so as the amount grows a line secured by the Billings home takes over, and a refinance or a closed-end second takes a lump sum.
What to prepare for a Billings scenario review.
What the lender looks at on a Billings line, and what you can gather before the review.
This is a general preparation guide, not a universal checklist. The selected lender may request additional information based on the occupancy, the property, the lien position, and the income picture. Nothing here is legal or tax advice.
Local details that can change the line.
The ceiling and the cap are only part of the answer; these are the details that decide what a Billings line actually becomes once the file is reviewed.
Use these checks to keep the Billings file clean and fundable.
The checklist is short because the program is specific: the tier, the valuation, and the property rules decide most Billings files before income is even reviewed.
- Confirm the tier: a self-pulled score can land a tier away from the one the program uses.
- Know the valuation: a recent renovation may not show in an automated value.
- Plan the draw: a large share of the line is drawn at closing on both programs.
The credit tier decides the ceiling and the cap
The tier is read from the lender’s report, not an app. On a Billings file the difference between two adjacent tiers can be a full step in the ceiling and a different line cap, which is why the tier is confirmed before anything is sized.
Automated valuation on most lines, appraisal on the largest
Most Billings lines are valued by an automated model; a higher combined loan-to-value may bring a secondary valuation, and every line above the program’s threshold takes a full appraisal with a stronger floor and a reduced ceiling. The model’s value, not the owner’s, is the one the ceiling is applied to.
The minimum draw at closing and the draw mechanics
Both programs require a large share of the line to be drawn at closing, so a Billings owner who wants a mostly undrawn reserve should size the line to the amount they are willing to take at funding. Later draws carry their own minimums on one program.
Housing history and derogatory credit
Recent mortgage or rent lates close the program, and the lookback is longer at the lower tiers. A bankruptcy seasons four years after discharge on both programs; a foreclosure, deed-in-lieu, or short sale is seasoned on one program and declined on the other.
Lien position and the first mortgage
The program writes first and second liens. Behind an existing mortgage the line is a second lien; on a Billings home with no mortgage it is the first. Either way, the line has a three to five year interest-only draw period, and then repayment begins.
From a Billings prequalification to a funded line.
The Billings process is built around verification you authorize rather than documents you gather: identity, income, the property, and the valuation are each checked in order, and a prequalified offer comes before the hard credit pull.
Scenario review
Start with the value, the balance, the tier, and the occupancy. A Lendmire loan officer sizes the Billings line against the two programs, explains the structure that fits, and provides the terms in writing.
Prequalification
The property is authenticated, identity is verified, a soft credit pull confirms the tier, a valuation is pulled and the combined loan-to-value is checked, and a prequalified offer is presented. Only after you accept it is a hard credit pull consented to.
Verification and valuation
The Billings valuation path is set by the line: automated on most lines, with a second opinion at higher leverage and an appraiser above the threshold. Income and obligations are verified in parallel.
Closing and funding
Documents are signed by remote online notarization where Montana permits it, otherwise a mobile notary meets you in person. Funds disburse by electronic transfer to a connected account or by mailed check, and the minimum closing draw funds with the line.
A brokerage that matches the line to the equity.
A brokerage sees both programs; a single lender sees one. For a Billings owner that difference shows up in the ceiling, the cap, and the runway quoted at your tier, because Lendmire quotes the stronger cell and explains the trade.
Two programs, the stronger cell quoted
At every credit tier the two wholesale programs offer different ceilings, caps, and runways. Lendmire reads both for the Billings file and quotes the stronger cell, explaining what the leverage costs in runway, or the runway in leverage.
Structure matched to the use
A staged renovation, a consolidation, a down payment on the next property, and a reserve are four different uses, and the size of the line, the closing draw, and the runway should follow the use. A Billings scenario review starts there.
Licensed, consumer-purpose, in writing
Lendmire holds the license in the state where the Billings home sits, the disclosures that a consumer line requires are provided, and nothing on this page replaces the written terms a loan officer provides.
Trusted by homeowners & families alike.
Billings HELOC FAQs
The questions below come up on nearly every Billings HELOC conversation. The answers are general; the figures in the snapshot above are the program’s current parameters.
What is a HELOC, and how is it different from a home equity loan?
A line of credit lets you borrow, repay, and borrow again through the draw period; the remaining balance is repaid in the repayment period. A home equity loan is funded in one lump sum and repaid on a set schedule. Both typically rank behind the first mortgage, yet either can hold first position on a home with no mortgage.
How much can I borrow on a HELOC in Billings?
It depends on three things: what the Billings home is worth on the lender’s valuation, what is still owed on it, and where your credit lands on the ladder. The ceiling and the cap for that tier set the most the line can be; the balance sets how much room is left.
What credit score do I need for a HELOC?
The floor is in the snapshot above. More useful than the floor is the ladder: find the tier your report lands in and read the ceiling and the cap beside it, because that is the line the program supports.
Do I need an appraisal for a HELOC?
Not for most Billings lines. The automated valuation draws on public records and comparable sales, so it may not reflect a recent renovation. Where the line is large enough to require an appraisal, the appraiser’s value replaces the model’s.
How do the draw period and the repayment period work?
Two phases: a draw period of interest-only payments on whatever is borrowed, then a repayment period in which the balance amortizes. The two wholesale programs differ in length, trading a shorter draw and faster repayment for more leverage, or a longer draw and runway for less.
How is my debt-to-income ratio calculated on a HELOC?
Liabilities plus the interest-only payment on the maximum draw, over total verified income. The ratio is one of the few places where the tier changes the rule rather than the figure: the cap on the ratio is lower at the lower tiers.
Does a past bankruptcy or foreclosure disqualify me?
It depends on the event and its age. Bankruptcies season on both programs; foreclosure-family events are accepted on one program after seasoning and declined on the other. Recent housing lates are the harder problem on both.
How does a HELOC close, and when do I get the money?
A Billings line closes with a notary, remote or in person, and funds by transfer or check after any applicable cancellation period. The timing depends on verification and valuation; a loan officer sets expectations for your file.
What if I own my Billings home free and clear?
It is the simplest file: no balance to subtract means the line is the ceiling times the value, capped at the program maximum for the tier, written in first position with its own insurance rules.
Can I get a HELOC on a duplex or a small multi-unit home?
Multi-unit homes up to four units are eligible with a higher credit floor. Below a certain tier the program restricts the subject to a single-family home, so the floor on a multi-unit Billings file matters more.
Put Billings equity to work without touching the first mortgage.
Start with a scenario review: the value, the balance, the tier, and the use. A licensed Lendmire loan officer sizes the Billings line against both wholesale programs and provides the terms in writing.
This guide covers Billings — for the statewide ceilings, tiers, and state rules, see HELOC in Montana, part of Lendmire’s home equity line of credit program.
Nearby markets in Montana: Gardiner · Bozeman · Big Sky · West Yellowstone · Helena · Great Falls · Missoula · Whitefish
Related programs: Refinance Loans · Investment Property HELOC · Bank Statement HELOC