Current conventional guidelines, updated from one source.
Treat these as the program’s fixed points rather than an offer: the minimum down payment for a first-time buyer and for everyone else, the credit floor behind these pages, the leverage at which mortgage insurance begins and the points at which it ends, and the ratio an automated approval allows.
First-time buyer; 5% standard; 97% loan-to-value at the top
On a principal residence the down payment starts at 3% for a first-time buyer and 5% otherwise, the top leverage being 97% loan-to-value. Second homes and investment properties ask for more, as the leverage table shows, and the price of any leverage above 80% is mortgage insurance.
Priced on the score; no agency minimum with an automated approval
The wholesale programs behind these pages start at a 620 decision score. The agencies themselves set no minimum for an automated approval and ask for 620 on a manually underwritten fixed-rate loan and 640 on an adjustable; the score prices the loan and the insurance more than it gates them.
Required above 80% LTV; removed at 80% by request, 78% automatically
The insurance line in a conventional payment is a bridge, not a fixture: required above 80% loan-to-value, cancellable at 80% on request and 78% by law, and priced by the insurer on the score inside Fannie Mae’s published 0.58%–1.86% range. Twenty percent down skips it entirely.
With an automated approval; 36% to 45% on a manual file
An automated approval allows a total debt-to-income ratio up to 50%; a manually underwritten file is held to 36%, or 45% when the credit score and reserves meet the agencies’ matrix. The ratio is measured on the total housing payment plus every other monthly obligation against gross income.
| Purpose | Occupancy and program | Maximum LTV |
|---|---|---|
| Purchase | One-unit principal residence, first-time buyer (fixed rate) | 97% |
| Purchase | One-unit principal residence, standard | 95% |
| Purchase | HomeReady / Home Possible (income limits apply) | 97% |
| Purchase | Two- to four-unit principal residence | 95% |
| Purchase | Second home | 90% |
| Purchase | Investment property, one unit | 85% |
| Purchase | Investment property, two to four units | 75% |
| Refinance | Limited cash-out (rate-and-term), one-unit principal residence | 95% |
| Refinance | Cash-out, one-unit principal residence | 80% |
| Refinance | Cash-out, two to four units, second home or investment | 75% |
| Combined LTV | Maximum contribution |
|---|---|
| above 90 percent | 3% of the sales price |
| 75.01 to 90 percent | 6% of the sales price |
| 75 percent or less | 9% of the sales price |
| investment property (any) | 2% of the sales price |
| Event | Waiting period |
|---|---|
| Chapter 7 or 11 bankruptcy | four years from discharge or dismissal (two years with documented extenuating circumstances) |
| Chapter 13 bankruptcy | two years from discharge; four years from dismissal (two with extenuating circumstances) |
| Multiple bankruptcy filings | five years when more than one filing within the past seven years |
| Foreclosure | seven years (three with extenuating circumstances, then limited to a principal residence or second home at 90 percent LTV, purchase or limited cash-out) |
| Deed-in-lieu, short sale or mortgage charge-off | four years (two with extenuating circumstances) |
Mortgage insurance: Fannie Mae reports that private mortgage insurance typically ranged from 0.58%–1.86% of the loan amount a year; the premium on a specific loan is priced by the insurer on the score, the leverage, and the coverage, and is never quoted here. Gifts from relatives may fund the entire down payment on a one-unit principal residence. HomeReady and Home Possible lend to 97% with income at or below 80% of the area median; HomeOne lends to the same leverage with a first-time buyer and no income limit.
Current conventional snapshot · updated October 1, 2026 · principal residences occupied within sixty days, second homes, and one- to four-unit investment properties · conforming limits apply by county and are confirmed by a Lendmire loan officer · above the limit, see the jumbo program · no prepayment penalty · Lendmire is a broker, never the lender.
Program guidelines only, not an offer of credit. The leverage, credit floor, mortgage insurance thresholds, ratio maximums, contribution caps, and waiting periods on this page are agency parameters and lender overlays subject to change without notice and to full underwriting of the borrower and the property. Mortgage insurance premiums are priced by the insurer and are not quoted here. Lendmire is a broker, not a lender. Licensed in sixteen states for consumer mortgages. NMLS #2371349.
What a conventional loan is — and how the file is qualified.
Every Raleigh conventional file is read by an automated underwriting system against the agencies’ guides. The system does not change the rules below; it applies them: how much leverage the occupancy allows, how the score is read, when mortgage insurance attaches and ends, and what the ratios and reserves must show.
For the program overview, see Lendmire’s conventional loan program, or the statewide guide at Conventional Loans in North Carolina; for the mortgage insurance cancellation rules, see the CFPB.
Leverage by occupancy and buyer
The agencies lend most on a home the borrower lives in and less as the occupancy changes: a one-unit principal residence reaches the top leverage, with the first-time buyer’s minimum the lowest down payment in the program; two- to four-unit homes, second homes, and investment properties step down from there, as the table in the snapshot shows for a Raleigh buyer.
Credit scores and automated underwriting
A derogatory event does not end eligibility; it starts a clock. Bankruptcies, foreclosures, short sales, and deed-in-lieu transfers each carry a waiting period in the agencies’ guides, shortened by documented extenuating circumstances, and the snapshot shows each one for a Raleigh buyer planning the timing.
Mortgage insurance that cancels
Twenty percent down means no mortgage insurance at all, and anything less means insurance for a while. The calculator on this page shows the Raleigh payment with the estimated premium and the payment after it ends, along with the month on the amortization schedule when the request and automatic thresholds arrive.
Ratios, reserves, and the DU finding
Reserves are measured in months of the total housing payment and set by the finding, the occupancy, and the number of financed properties; a Raleigh second-home or investment file carries more than a principal residence. Income needs a two-year history and a reasonable expectation of continuing.
A lender runs the same math on a Raleigh file with one difference: the insurer’s actual premium replaces the estimate. The estimate here starts at the low end of the published range and is editable, because the real figure depends on the score and the leverage.
Where Raleigh buyers borrow — and how a conforming loan fits.
The leverage limits are percentages; the market turns them into dollars. The Census figures below describe Raleigh’s ownership, home values, and household income, the backdrop every conforming loan here is sized against.
Market context only. Income sets the ratio, value sets the loan and the premium, and the down payment sets the leverage. The Census describes the first two for the market; the file supplies all three for the borrower.
Data sources: U.S. Census Bureau — ACS 5-Year (2024) housing and population estimates, including tenure, home values, gross rents, and household income.
Distinct Raleigh neighborhoods, distinct conventional files.
Where Raleigh buyers shop, and what the conforming file turns on in each place: the occupancy, the property type the appraiser sees, the project review it needs, and the price the ratio has to carry.
Two-to-four-unit homes
Owner occupancy of one unit sets the leverage on a Raleigh multi-unit conventional loan; without it, the property is an investment purchase at the lower investment leverage. The appraisal reads every unit and the rents. The median owner-occupied home value in Raleigh runs near $415,800 on the latest Census estimate.
Condominiums and townhomes
Townhomes in Raleigh finance like houses when they are fee simple and like condominiums when they are organized as one; the lender settles which before the appraisal, and the leverage follows the occupancy either way. About 49% of Raleigh’s households rent — roughly 100,202 renter households on the latest Census estimate.
Newer infill and recent construction
A newer Raleigh home rarely draws condition notes; the file turns on the limit and the ratio at the higher price, with the insurance premium added to the payment where the leverage runs above the threshold. On a home at Raleigh’s median value, the first-time buyer’s minimum down payment comes to about $12,500 and the standard minimum to about $20,800 — before closing costs, and before the mortgage insurance that comes with either.
Established close-in neighborhoods
The Raleigh blocks nearest the core carry the oldest houses, and a conventional appraisal reads them for value first and condition second: no HUD or VA property standard, but the home must be safe, sound, and marketable, and a failing roof or system still draws a condition note. Raleigh counts a population near 481K within the Raleigh-Cary, NC area.
Investor and second-home purchases
A second home in Raleigh, occupied part of the year and never run as a rental business, is a conventional file at the second-home leverage with deeper reserves and part of the down payment from the buyer’s own funds. Roughly 103,241 Raleigh households own their homes on the latest Census estimate — 51% of all households, the pool a conventional purchase joins.
Higher-value homes
A high-value Raleigh purchase can still be a conforming loan when the loan amount fits under the county limit, and a high-cost county’s higher range extends that reach; above it, the jumbo program takes the file with its own leverage and reserves. Median household income in Raleigh sits near $85,395 on the latest Census estimate.
The rules do not change with the street. Every Raleigh file is checked the same way: price against the appraisal, property against the agencies’ standards, condominium against the project review, occupancy against its leverage limit, and borrower against the score, the ratios, and the reserves the finding requires.
Four ways Raleigh buyers put a conforming loan to work.
A good use of a conventional loan is one its shape fits: a decent score, a down payment of any size from the minimum up, an occupancy the agencies allow, and a loan inside the conforming limit. Four common Raleigh uses follow.
Buy a second home
For the Raleigh vacation or weekend home, the conforming loan is usually the only consumer route: FHA and VA finance principal residences only. The down payment is larger, the reserves are deeper, and the score prices the loan the same way it does on any conventional purchase.
Buy a first home at the first-time-buyer minimum
The first purchase on a conventional loan starts at the first-time buyer’s minimum in the snapshot, with the whole amount allowed as a family gift. A Raleigh buyer with a solid score may pay less each month than on FHA because the insurance is priced on the score and ends; the comparison is run on the actual numbers.
Buy a condominium in a warrantable project
A Raleigh condominium is a conventional purchase when the project passes the agencies’ review: owner-occupancy mix, budget and reserves, litigation, commercial space, and ownership concentration. The dues enter the ratio, and the leverage follows the occupancy as it would on a house.
Buy an investment property
The rental purchase is inside the conventional program at a lower leverage than a principal residence: a Raleigh buyer uses the agencies’ rules for counting rental income, shows reserves for every property financed, and accepts loan-level adjustments that reflect the occupancy.
Estimate the payment on a Raleigh price before requesting a quote.
Enter a Raleigh price, the down payment, and the buyer type, choose a term, and the calculator returns the loan and its loan-to-value, principal and interest, the estimated mortgage insurance while the loan is above the threshold, taxes and insurance, the payment after the insurance ends, and the ratio if you enter income. It also shows the month the balance reaches the cancellation thresholds. The rate field holds the weekly Freddie Mac benchmark as a market reference, never a quote.
Raleigh conventional payment estimate
The starting figures are a typical Raleigh price at the first-time buyer’s minimum down payment. Replace them with yours.
Editable benchmark: 7.03% as of September 24, 2026 · Freddie Mac 30-year average via FRED®. A conventional market reference, not a conventional loan quote.
Estimate seeded at the low end of Fannie Mae’s published range (0.58%–1.86% a year); the insurer prices the actual premium on the score and the leverage. Applies only above 80% loan-to-value.
Illustrative starting assumptions: a $415,000 price near Raleigh’s median owner-occupied home value, the first-time buyer’s minimum down payment, a thirty-year term at the current Freddie Mac benchmark, mortgage insurance at the low end of Fannie Mae’s published range, property taxes and insurance estimated for North Carolina (U.S. Census Bureau). Every field is editable.
Illustrative estimate only — not a Loan Estimate, approval, quote, or commitment to lend. The rate field carries the weekly Freddie Mac thirty-year conventional benchmark, a market reference and not a conventional loan quote; your rate is set by the lender at lock. The mortgage insurance figure is an editable estimate seeded from Fannie Mae’s published typical range, not a premium quote; the insurer prices the actual premium, and the cancellation month assumes scheduled payments with no extra principal and no change in value. Taxes, insurance and dues are editable estimates; closing costs are not included. Conforming loan limits apply by county. Licensed in sixteen states for consumer mortgages.
Same buyer, three very different closings.
Most buyers can close the same purchase three ways, and the structures differ more than the labels suggest: conventional with insurance that cancels, FHA with a small investment and premiums for the life of the loan at full leverage, or VA with nothing down and no insurance for the eligible veteran.
Conventional, FHA, or VA.
Conventional fits the Raleigh buyer with a solid score: the premium is smaller than FHA’s for strong credit and it ends, there is no upfront premium, and twenty percent down removes insurance altogether. A modest score or a thin file is where FHA competes.
FHA’s leverage is high and its credit standard is forgiving, but its insurance is priced by schedule rather than by score and does not cancel on a full-leverage thirty-year loan. A Raleigh buyer comparing the two sees the premium line stay on FHA and disappear on conventional. See Lendmire’s FHA loan program.
VA beats conventional on the principal residence for nearly every eligible borrower; conventional beats VA on everything VA does not touch: second homes, rentals, and buyers without the certificate. The two often sit side by side in one Raleigh household. See Lendmire’s VA loan program.
The decision is rarely close once the profile is known. Conventional tends to win the strong score and every non-primary occupancy, FHA the modest score, and VA nearly any eligible principal residence. The comparison is run on the actual numbers, in writing. Above the conforming limit, see the jumbo loan program.
What to prepare for a Raleigh scenario review.
The paperwork is the standard mortgage set, with the automated finding deciding how much of it the file actually needs; here is what a Raleigh scenario review typically draws on.
This is a general preparation guide, not a universal checklist. The selected lender may request additional information based on the transaction, the property, the automated underwriting finding, and the income picture. Nothing here is legal or tax advice.
Local details that can change the loan.
The percentages tell only part of the story. What a Raleigh conventional loan actually becomes depends on the score, the appraisal, the project review, and the automated finding, and these are the details that move it.
Use these checks to keep the Raleigh file clean and fundable.
A Raleigh file that is ready to review has already answered three questions: what leverage and therefore what insurance, what score and therefore what price, and whether the home is inside the agencies’ rules.
- Plan the insurance: the premium is priced on the score and the leverage inside the published range.
- Confirm the score: a self-pulled score can differ from the decision score.
- Structure the contract: second homes and multi-unit homes need the buyer’s own funds above the threshold.
Mortgage insurance: how much, and until when
Cancellation on request needs a good payment history, no subordinate liens, and no decline in value; automatic termination needs only that the loan be current. A Raleigh owner whose home has gained value may also ask the servicer to recognize the current value under its own rules, which is a servicer decision rather than a program right.
The score sets the cost
The score does two jobs on a Raleigh file: it feeds the automated assessment alongside the rest of the credit file, and it sets the cost of the loan and the insurance. A buyer close to a cost tier sometimes gains more from a short wait and a paid-down balance than from any other change.
Seller contributions and the down payment
A Raleigh contract can shift most closing costs to the seller inside the cap for the leverage, which leaves the buyer bringing the down payment and little else. On second homes and two- to four-unit homes above the threshold, part of the down payment must be the buyer’s own funds.
Ratios, reserves, and the finding
The total ratio counts the full housing payment, insurance included, plus every other obligation, against gross income, up to the automated ceiling in the snapshot; a manual file is held to the lower pair. The finding also sets the reserves, and a Raleigh buyer with other financed properties carries more of them.
Second homes, rentals, and financed-property limits
Buying a second home or a rental in Raleigh on a conventional loan means qualifying on the full payments of every property owned, documenting the rents the agencies allow, and showing reserves for each. The leverage table gives the down payment for each occupancy.
From a Raleigh pre-approval to keys in hand.
A conventional purchase runs in a fixed order: pre-approval through the automated system on the score, the ratio, and the reserves; contract and appraisal or value acceptance; underwriting that verifies what the finding assumed; and closing with the insurance structure set. Here is that order for a Raleigh buyer.
Pre-approval
Start with the score, the income, the down payment, and the occupancy. A Lendmire loan officer runs the automated system, confirms the leverage and the insurance for the down payment chosen, checks the loan against the conforming limit, compares the structure with FHA and VA on the same numbers, and provides the terms in writing.
Contract and appraisal
The appraisal is a valuation first and a condition report second on a conventional file; a short value re-sizes the loan, and the Raleigh contract is adjusted or released under its contingency. Where the system offers value acceptance, the step collapses to the system’s figure.
Underwriting
The underwriter verifies what the automated finding assumed: the income, the assets and reserves, the credit and any seasoning, the occupancy, and the property. A manual file follows the lower ratio pair instead. Conditions are issued, documented, and cleared before the approval is final.
Closing
At closing the loan is funded at the leverage chosen, the mortgage insurance begins with the first payment where the loan sits above the threshold, and the escrows for taxes and insurance are set up. A Raleigh buyer signs the note and the security instrument, occupies the home within the occupancy window, and the loan is sold to the agency.
A brokerage that prices the whole market.
The case for a brokerage on a conventional loan is candor with numbers: the same file priced across programs, the insurance premium and its cancellation month stated outright, the leverage checked against the occupancy, and the terms in writing.
Several programs, one set of numbers
Before any recommendation, the Raleigh file is priced across the wholesale programs Lendmire works with and run against FHA and VA on the same price, score, and down payment. The buyer sees the payment, the insurance line, and the cash to close for each, and the choice follows the figures.
The insurance explained before the offer
The premium and its exit are decided by the leverage and the score, and a buyer should know both before signing a contract. Lendmire states the structure for the Raleigh purchase, shows the payment before and after cancellation, and explains the request and automatic thresholds.
Licensed, consumer-purpose, in writing
Lendmire is licensed in sixteen states for consumer mortgages, each owner-occupied loan is a consumer-purpose transaction with the full set of disclosures, and every figure a Raleigh buyer relies on, from the leverage to the premium to the final terms, comes in writing from a licensed loan officer.
Trusted by buyers & families alike.
Raleigh conventional loan FAQs
Plain answers to the questions Raleigh buyers ask most about conventional loans, in the order they usually ask them.
What is a conventional loan, and who is it for?
A conventional loan is the mortgage a Raleigh buyer with good credit should compare first: a low down payment for the first-time buyer, insurance that cancels, no upfront premium, and the breadth to finance a second home or a rental under the same rules.
How much do I need to put down on a conventional loan in Raleigh?
A small share of the price for a first-time buyer, a little more for a repeat buyer, and twenty percent to skip the insurance. On a Raleigh home at the median value the market section shows what the minimums come to in dollars.
What credit score do I need for a conventional loan?
The wholesale programs behind these pages start at the floor shown in the snapshot. Fannie Mae itself sets no minimum score for a loan its automated system approves and a minimum only for manually underwritten loans; what the score mostly does is set the price of the loan and the mortgage insurance, so a Raleigh buyer above the floor still benefits from every tier gained.
How does private mortgage insurance work, and when does it end?
Three dates matter: the month the balance reaches the request threshold, when the borrower can ask the servicer to drop the premium with a good payment history; the month it reaches the termination threshold, when the servicer must drop it; and the midpoint of the term, the final backstop. Twenty percent down means none of this applies.
What is the conforming loan limit in Raleigh?
The limit changes every year and differs by county and unit count, so ask a loan officer for the current figure. It caps the loan, not the price: a Raleigh buyer above it brings a larger down payment or uses a jumbo loan.
Can the seller pay my closing costs on a conventional loan?
Up to the share of the price in the snapshot table for the combined loan-to-value. Anything above it reduces the price for sizing the loan, and nothing from the seller may fund the down payment.
What does the appraisal check on a conventional loan?
Value against the contract price, and condition against the lender’s standard of safe, sound, and marketable. Older Raleigh homes draw condition notes more often; most are settled before closing.
What are HomeReady, Home Possible, and HomeOne?
Affordable conventional lending in three flavors: two income-limited programs and one first-time-buyer program. The Raleigh buyer who fits one gets the lowest conventional down payment with a lighter insurance requirement.
Can I buy a second home with a conventional loan?
It is the usual route to a Raleigh second home, since FHA and VA finance principal residences only. Expect a larger down payment than on a principal residence, deeper reserves, and adjustments for the occupancy.
How does a conventional refinance work?
A conventional refinance has its own rows in the leverage table, below the purchase rows. The limited cash-out version changes the loan’s terms; the cash-out version borrows against equity and generally needs six months of ownership first.
Conventional, FHA, or VA for Raleigh: compared on your numbers.
Put your Raleigh figures into the calculator, then ask for a review. The leverage, the insurance structure, the cost tier, and the conforming limit are confirmed against the agencies’ rules, and a licensed loan officer provides the terms in writing.
This guide covers Raleigh — for the statewide guidelines, markets, and scenarios, see Conventional Loans in North Carolina, part of Lendmire’s conventional loan program.
Nearby markets in North Carolina: Cary · Durham · Greensboro · Winston-Salem · Charlotte
Related programs: FHA Loans · Jumbo Loans · Refinance Loans