Current conventional guidelines, updated from one source.
Treat these as the program’s fixed points rather than an offer: the minimum down payment for a first-time buyer and for everyone else, the credit floor behind these pages, the leverage at which mortgage insurance begins and the points at which it ends, and the ratio an automated approval allows.
First-time buyer; 5% standard; 97% loan-to-value at the top
On a principal residence the down payment starts at 3% for a first-time buyer and 5% otherwise, the top leverage being 97% loan-to-value. Second homes and investment properties ask for more, as the leverage table shows, and the price of any leverage above 80% is mortgage insurance.
Priced on the score; no agency minimum with an automated approval
620 is the working floor, a wholesale overlay rather than an agency rule, since Fannie Mae requires no minimum score for a loan the automated system approves and 620 only on a manual fixed-rate file. Above the floor, each step up in score lowers the cost of the loan and of the insurance.
Required above 80% LTV; removed at 80% by request, 78% automatically
The insurance line in a conventional payment is a bridge, not a fixture: required above 80% loan-to-value, cancellable at 80% on request and 78% by law, and priced by the insurer on the score inside Fannie Mae’s published 0.58%–1.86% range. Twenty percent down skips it entirely.
With an automated approval; 36% to 45% on a manual file
Lenders compare total debt against gross income, with limits up to 50% on an automated approval and 36% to 45% on a manual file. The housing payment counted includes the mortgage insurance while it applies, which is why cancellation changes the ratio as well as the payment.
| Purpose | Occupancy and program | Maximum LTV |
|---|---|---|
| Purchase | One-unit principal residence, first-time buyer (fixed rate) | 97% |
| Purchase | One-unit principal residence, standard | 95% |
| Purchase | HomeReady / Home Possible (income limits apply) | 97% |
| Purchase | Two- to four-unit principal residence | 95% |
| Purchase | Second home | 90% |
| Purchase | Investment property, one unit | 85% |
| Purchase | Investment property, two to four units | 75% |
| Refinance | Limited cash-out (rate-and-term), one-unit principal residence | 95% |
| Refinance | Cash-out, one-unit principal residence | 80% |
| Refinance | Cash-out, two to four units, second home or investment | 75% |
| Combined LTV | Maximum contribution |
|---|---|
| above 90 percent | 3% of the sales price |
| 75.01 to 90 percent | 6% of the sales price |
| 75 percent or less | 9% of the sales price |
| investment property (any) | 2% of the sales price |
| Event | Waiting period |
|---|---|
| Chapter 7 or 11 bankruptcy | four years from discharge or dismissal (two years with documented extenuating circumstances) |
| Chapter 13 bankruptcy | two years from discharge; four years from dismissal (two with extenuating circumstances) |
| Multiple bankruptcy filings | five years when more than one filing within the past seven years |
| Foreclosure | seven years (three with extenuating circumstances, then limited to a principal residence or second home at 90 percent LTV, purchase or limited cash-out) |
| Deed-in-lieu, short sale or mortgage charge-off | four years (two with extenuating circumstances) |
Mortgage insurance: Fannie Mae reports that private mortgage insurance typically ranged from 0.58%–1.86% of the loan amount a year; the premium on a specific loan is priced by the insurer on the score, the leverage, and the coverage, and is never quoted here. Gifts from relatives may fund the entire down payment on a one-unit principal residence. HomeReady and Home Possible lend to 97% with income at or below 80% of the area median; HomeOne lends to the same leverage with a first-time buyer and no income limit.
Current conventional snapshot · updated October 3, 2026 · principal residences occupied within sixty days, second homes, and one- to four-unit investment properties · conforming limits apply by county and are confirmed by a Lendmire loan officer · above the limit, see the jumbo program · no prepayment penalty · Lendmire is a broker, never the lender.
For informational purposes only. This is not a commitment to lend or extend credit, an offer, or a quote. Program parameters shown are Fannie Mae and Freddie Mac guidelines and wholesale lender overlays, are subject to change without notice, and every figure depends on the borrower, the property, the occupancy, the automated underwriting finding, and full underwriting. Mortgage insurance figures are published typical ranges and editable estimates, not premium quotes. Conforming loan limits apply by county. Lendmire is a mortgage broker, not a lender. Licensed in sixteen states for consumer mortgages. NMLS #2371349.
What a conventional loan is — and how the file is qualified.
A conventional loan is a mortgage written to the rules of Fannie Mae and Freddie Mac so a lender can sell it to them after closing. Those rules decide the leverage by occupancy, the credit standard, the insurance above the threshold, and the ratios, and the four cards below take a Taylor file apart along exactly those lines.
For the program overview, see Lendmire’s conventional loan program, or the statewide guide at Conventional Loans in Michigan; for the mortgage insurance cancellation rules, see the CFPB.
Leverage by occupancy and buyer
The agencies lend most on a home the borrower lives in and less as the occupancy changes: a one-unit principal residence reaches the top leverage, with the first-time buyer’s minimum the lowest down payment in the program; two- to four-unit homes, second homes, and investment properties step down from there, as the table in the snapshot shows for a Taylor buyer.
Credit scores and automated underwriting
The automated system reads the score and the credit events together, and a derogatory event does not end eligibility; it starts a clock. Bankruptcies, foreclosures, short sales, and deed-in-lieu transfers each carry a waiting period in the agencies’ guides, shortened by documented extenuating circumstances, and the snapshot shows each one for a Taylor buyer.
Mortgage insurance that cancels
Twenty percent down means no mortgage insurance at all, and anything less means insurance for a while. The calculator on this page shows the Taylor payment with the estimated premium and the payment after it ends, along with the month on the amortization schedule when the request and automatic thresholds arrive.
Ratios, reserves, and the DU finding
Total debt-to-income is the ratio that counts: the full housing payment, insurance included, plus every monthly obligation, against gross income. Automated approvals reach the higher ceiling in the snapshot; manual files are held to the lower pair, with the higher of the two needing the matrix’s credit and reserve criteria.
A lender runs the same math on a Taylor file with one difference: the insurer’s actual premium replaces the estimate. The estimate here starts at the low end of the published range and is editable, because the real figure depends on the score and the leverage.
Where Taylor buyers borrow — and how a conforming loan fits.
These numbers are Taylor’s, not any one borrower’s: owner households, median home value, and household income from the U.S. Census Bureau. They give the scale of a typical purchase here; the score, the appraisal, and the household’s own income give the loan.
Citywide figures provide general market context, not an appraisal or an income calculation. Two buyers at the same score can see different files here: one buys at the median and sits well inside the ratio, another stretches above it and needs reserves and a stronger finding. The market sets the spread.
Data sources: U.S. Census Bureau — ACS 5-Year (2024) housing and population estimates, including tenure, home values, gross rents, and household income.
Distinct Taylor neighborhoods, distinct conventional files.
A Taylor condominium, a decades-old family house, and a second home are three different conventional files: different project reviews, different leverage, different reserves. The six submarkets below show the range.
Newer subdivisions on the bypass
On a new Taylor home the appraisal is usually uneventful and the ratio decides the file. Twenty percent down removes the insurance and lowers the ratio at the same time. On a one-unit principal residence at Taylor’s median value, the first-time buyer’s minimum down payment comes to about $4,600 and the standard minimum to about $7,600 — before closing costs, and before the mortgage insurance that comes with either; a second home, a multi-unit home, or a rental starts higher, as the leverage table shows.
Multi-unit conversions
One side occupied, the other side’s rent counted within the program’s rules: that is the Taylor duplex on a conventional loan, at the multi-unit leverage rather than the single-family one. Roughly 16,824 Taylor households own their homes on the latest Census estimate — 67% of all households, the pool a conventional purchase joins.
Everyday values and the first-time minimum
A typical Taylor price keeps the down payment and the premium in proportion, which is why a first-time buyer in the market compares conventional first when the score is solid. The calculator shows the payment at a Taylor price. Median household income in Taylor sits near $61,081 on the latest Census estimate.
Manufactured homes
Taylor manufactured homes finance on conventional loans under the agencies’ rules for the home and the site; a home on leased land or without a permanent foundation does not qualify, and the wholesale programs may add conditions. Taylor is home to about 62K people.
In-town neighborhoods
In Taylor’s older neighborhoods the value report decides more than the condition report. A buyer at the first-time-buyer minimum pays insurance for a while; a buyer at twenty percent pays none. About 33% of Taylor’s households rent — roughly 8,404 renter households on the latest Census estimate.
Rural-edge and acreage properties
Homes on larger lots around Taylor are conventional purchases when the use is residential; agricultural use puts the property outside the program, and the appraisal values the house and the land on comparable sales. The median owner-occupied home value in Taylor runs near $152,600 on the latest Census estimate.
What the program accepts is the same everywhere in Taylor: houses, warrantable condominiums, planned developments, manufactured homes that meet the agencies’ rules, two- to four-unit homes, second homes, and investment property, each at its own leverage. What it declines is the non-warrantable project and the loan above the conforming limit, which belong to other programs.
Four ways Taylor buyers put a conforming loan to work.
The conventional loan is one of the broadest mortgage programs there is: it buys a first home with a small down payment, a move-up home with cancellable insurance, a second home, and a rental, and it refinances all of them. The cards below are the uses that bring Taylor borrowers to it most.
Refinance or take cash out
Refinancing on a conventional loan follows the same leverage table as buying: rate-and-term to the higher limit, cash-out to the lower one. A Taylor owner who has carried mortgage insurance may also use the refinance to leave it behind once the new loan sits at or below the threshold.
Buy an investment property
Investment property on a conforming loan is a common entry point for Taylor landlords: one to four units, a down payment set by the leverage table, rental income counted under the agencies’ rules, and a cap on how many financed properties one borrower may hold.
Buy with twenty percent down and no insurance
Twenty percent down removes the insurance line from the payment on any conventional purchase in Taylor; between the minimum and twenty percent, the insurance applies for a while and then ends, and the calculator shows both payments.
Buy a second home
A second home in Taylor is a conventional file with its own leverage and reserve rules: more down than a principal residence, the payment on the existing home counted in the ratio, and a property the owner occupies part of the year rather than rents full time.
Estimate the payment on a Taylor price before requesting a quote.
The program’s own math on your Taylor inputs: price less the down payment, amortized at the benchmark, with the insurance estimate added while the leverage is above the threshold and the escrows added throughout. The actual rate, premium, payment, and costs come in writing from a licensed loan officer.
Taylor conventional payment estimate
The defaults are a Taylor starting point, not your purchase: put in the real price, the real down payment, and the real escrows.
Editable benchmark: 7.28% as of October 1, 2026 · Freddie Mac 30-year average via FRED®. A conventional market reference, not a conventional loan quote.
Estimate seeded at the low end of Fannie Mae’s published range (0.58%–1.86% a year); the insurer prices the actual premium on the score and the leverage. Applies only above 80% loan-to-value.
Illustrative starting assumptions: a $155,000 price near Taylor’s median owner-occupied home value, the first-time buyer’s minimum down payment, a thirty-year term at the current Freddie Mac benchmark, mortgage insurance at the low end of Fannie Mae’s published range, property taxes and insurance estimated for Michigan (U.S. Census Bureau). Every field is editable.
Illustrative estimate only — not a Loan Estimate, approval, quote, or commitment to lend. The rate field carries the weekly Freddie Mac thirty-year conventional benchmark, a market reference and not a conventional loan quote; your rate is set by the lender at lock. The mortgage insurance figure is an editable estimate seeded from Fannie Mae’s published typical range, not a premium quote; the insurer prices the actual premium, and the cancellation month assumes scheduled payments with no extra principal and no change in value. Taxes, insurance and dues are editable estimates; closing costs are not included. Conforming loan limits apply by county. Licensed in sixteen states for consumer mortgages.
Same buyer, three very different closings.
The score, the down payment available, VA eligibility, and the expected length of the loan decide which program wins. Here are the three, one next to the other.
Conventional, FHA, or VA.
Conventional fits the Taylor buyer with a solid score: the premium is smaller than FHA’s for strong credit and it ends, the monthly structure carries no upfront premium, and twenty percent down removes insurance altogether. A modest score or a thin file is where FHA competes.
FHA’s leverage is high and its credit standard is forgiving, but its insurance is priced by schedule rather than by score and does not cancel on a full-leverage thirty-year loan. A Taylor buyer comparing the two sees the premium line stay on FHA and disappear on conventional. See Lendmire’s FHA loan program.
A Taylor buyer with VA eligibility and full entitlement rarely needs a conventional loan for a principal residence: nothing down, no insurance, and residual-income underwriting. Conventional is the route for that same veteran’s second home or investment property, which VA does not finance. See Lendmire’s VA loan program.
Conventional for the solid score, the move-up buyer, the second home, and the rental; FHA for the modest score and the small investment; VA for the eligible borrower buying a principal residence. The Taylor file is priced on all three before one is recommended. Above the conforming limit, see the jumbo loan program.
What to prepare for a Taylor scenario review.
Gather these before a Taylor review: the ordinary mortgage documents, plus the pieces that settle the first-time-buyer question and the occupancy.
This is a general preparation guide, not a universal checklist. The selected lender may request additional information based on the transaction, the property, the automated underwriting finding, and the income picture. Nothing here is legal or tax advice.
Local details that can change the loan.
The percentages tell only part of the story. What a Taylor conventional loan actually becomes depends on the score, the appraisal, the project review, and the automated finding, and these are the details that move it.
Use these checks to keep the Taylor file clean and fundable.
A Taylor file that is ready to review has already answered three questions: what leverage and therefore what insurance, what score and therefore what price, and whether the home is inside the agencies’ rules.
- Plan the insurance: the premium is priced on the score and the leverage inside the published range.
- Confirm the score: a self-pulled score can differ from the decision score.
- Know the seasoning: a documented hardship must be beyond the borrower’s control.
Mortgage insurance: how much, and until when
The premium on a Taylor loan can be paid monthly, paid by the lender in exchange for a different price, paid as a single premium at closing, or split. The monthly structure cancels under the federal rules, and the others are set by the lender. The calculator shows the monthly structure and the month the thresholds arrive on scheduled payments.
The score sets the cost
The decision score comes from the lender’s report, and with multiple borrowers the automated system uses the average of the median scores. On a Taylor conventional file the score rarely ends eligibility, but it sets the loan-level adjustments and insurance premium, so a few points can change monthly cost.
Waiting periods after a credit event
The agencies season credit events rather than barring them: each bankruptcy chapter, a foreclosure, a deed-in-lieu, and a short sale carry their own period, shortened by documented extenuating circumstances. The snapshot table shows each one for a Taylor buyer planning the timing.
Seller contributions and the down payment
A Taylor contract can shift most closing costs to the seller inside the cap for the leverage, which leaves the buyer bringing the down payment and little else. On second homes and two- to four-unit homes above the threshold, part of the down payment must be the buyer’s own funds.
The conforming limit
The conforming limit is the first thing confirmed on a Taylor file near the top of the market, and the high-balance range in some counties sits above the standard figure. Ask a loan officer for the current limit where you are buying before writing the offer; a loan above it needs a larger down payment or the jumbo program.
From a Taylor pre-approval to keys in hand.
From the first conversation to the closing table, a Taylor conventional purchase takes four steps, and each one carries an agency rule inside it.
Pre-approval
The first conversation settles the shape: whether the buyer counts as a first-time buyer, what leverage the occupancy allows, how much insurance the down payment carries, and whether conventional is the right program next to FHA and VA for the Taylor purchase.
Contract and appraisal
The Taylor contract sets the price and the contributions; the appraisal, or the system’s value acceptance, sets the value. Both feed the loan amount, and the lender confirms the project review and the conforming limit before underwriting begins.
Underwriting
The automated finding says what the file needs; the underwriter confirms the file has it. A Taylor buyer who gathered the documents at pre-approval clears conditions quickly; one who did not spends the time here.
Closing
Closing is where the structure becomes a payment: principal and interest, the insurance while the loan is above the threshold, taxes and insurance. The Taylor buyer takes the keys, and the lender delivers the loan to the agency it was written for.
A brokerage that prices the whole market.
The case for a brokerage on a conventional loan is candor with numbers: the same file priced across programs, the insurance premium and its cancellation month stated outright, the leverage checked against the occupancy, and the terms in writing.
Several programs, one set of numbers
The comparison printed on this page is run for real on every Taylor file: conventional with the insurer’s actual premium beside FHA with its premiums beside VA where eligibility exists, and the written terms follow from it.
The insurance explained before the offer
No Taylor buyer should learn at the closing table what the insurance costs or how long it lasts. The loan officer walks through the premium for the leverage chosen, the month the thresholds arrive on scheduled payments, and the alternative of a larger down payment.
Licensed, consumer-purpose, in writing
What this page shows are the agencies’ parameters and the wholesale overlays; what a specific Taylor loan gets is a written set of terms from a licensed loan officer after the review. Lendmire is a broker, never the lender.
Trusted by buyers & families alike.
Taylor conventional loan FAQs
The questions below come up on nearly every Taylor conventional conversation. The answers are general; the figures in the snapshot above are the program’s current parameters.
What is a conventional loan, and who is it for?
Think of it as the mortgage without a federal guaranty or insurance: the agencies set the rules, a private insurer covers the high-leverage slice, and the score sets the price. Principal residences, second homes, and one- to four-unit rentals are all inside it.
How much do I need to put down on a conventional loan in Taylor?
The first-time buyer’s minimum down payment is in the snapshot on this page, for a one-unit principal residence with a fixed rate. A first-time buyer is anyone without an ownership interest in a home during the prior three years. Everyone else pays the standard minimum. Second homes, multi-unit homes, and investment property need more, as the leverage table shows. A relative’s gift may fund the whole down payment on a one-unit principal residence.
What credit score do I need for a conventional loan?
The floor in the snapshot opens the program; the score above it sets the cost. With more than one borrower the automated system uses the average of the median scores, and a Taylor buyer close to a cost tier may gain from a short wait and a paid-down balance.
How does private mortgage insurance work, and when does it end?
The premium is a percentage of the loan a year, divided into the monthly payment, and it is set by the insurer on the score and the leverage rather than by a government schedule. It cancels: by request at the request threshold, automatically at the termination threshold, and no later than the midpoint of the term.
What is the conforming loan limit in Taylor?
Ask a loan officer for the county’s current limit; it changes yearly and by unit count. Above it, a Taylor purchase is still possible with a larger down payment on a conforming loan or on a jumbo loan.
Can I take cash out with a conventional refinance?
Cash-out is a full refinance at the snapshot’s cash-out leverage, available on a principal residence, a second home, or a rental at each one’s limit. Twelve months on the mortgage being paid off, note date to note date, and six months on title is the general seasoning rule, with exceptions for delayed financing and inheritance.
What are HomeReady, Home Possible, and HomeOne?
Affordable conventional lending in three flavors: two income-limited programs and one first-time-buyer program. The Taylor buyer who fits one gets the lowest conventional down payment with a lighter insurance requirement.
What does the appraisal check on a conventional loan?
Value against the contract price, and condition against the lender’s standard of safe, sound, and marketable. Older Taylor homes draw condition notes more often; most are settled before closing.
Should I choose a conventional loan or FHA?
Neither is better in general. Conventional insurance cancels; FHA’s does not at full leverage. FHA’s score threshold is lower; conventional’s premium is cheaper for strong credit. The loan officer compares them in writing.
Can the down payment be a gift?
It can, from an acceptable donor, for all of it on a one-unit principal residence; the donor must be a relative or similar, the letter must state no repayment is expected, and the transfer must be documented. Gifts may also fund closing costs and reserves.
A Taylor conventional loan sized to the price, the score, and the leverage.
Ask for a Taylor scenario review to confirm the leverage, the insurance and its exit, and the loan the program supports. Lendmire is a broker licensed in sixteen states for consumer mortgages and is never the lender.
This guide covers Taylor — for the statewide guidelines, markets, and scenarios, see Conventional Loans in Michigan, part of Lendmire’s conventional loan program.
Nearby markets in Michigan: Dearborn · Dearborn Heights · Westland · Livonia · Detroit · Southfield · Farmington Hills · Royal Oak
Related programs: FHA Loans · Jumbo Loans · Refinance Loans