Current conventional guidelines, updated from one source.
One guideline source feeds every number here, and the page updates when the source does. These are purchase and refinance parameters; the leverage table underneath covers occupancy by occupancy, and the status lines cover insurance, gifts, and the first-time-buyer programs.
First-time buyer; 5% standard; 97% loan-to-value at the top
On a principal residence the down payment starts at 3% for a first-time buyer and 5% otherwise, the top leverage being 97% loan-to-value. Second homes and investment properties ask for more, as the leverage table shows, and the price of any leverage above 80% is mortgage insurance.
Priced on the score; no agency minimum with an automated approval
A 620 decision score opens the program on the wholesale side; the agencies set no minimum for an automated approval and 620 to 640 for manual underwriting by loan type. The strongest effect of the score is on cost, through loan-level adjustments and the mortgage insurance premium.
Required above 80% LTV; removed at 80% by request, 78% automatically
Private mortgage insurance applies above 80% loan-to-value. Fannie Mae’s 2022 figures put the annual cost in a range of 0.58%–1.86%, depending on the score and the leverage. It ends by request at 80% of the original value, automatically at 78%, and no later than the midpoint of the term.
With an automated approval; 36% to 45% on a manual file
Lenders compare total debt against gross income, with limits up to 50% on an automated approval and 36% to 45% on a manual file. The housing payment counted includes the mortgage insurance while it applies, which is why cancellation changes the ratio as well as the payment.
| Purpose | Occupancy and program | Maximum LTV |
|---|---|---|
| Purchase | One-unit principal residence, first-time buyer (fixed rate) | 97% |
| Purchase | One-unit principal residence, standard | 95% |
| Purchase | HomeReady / Home Possible (income limits apply) | 97% |
| Purchase | Two- to four-unit principal residence | 95% |
| Purchase | Second home | 90% |
| Purchase | Investment property, one unit | 85% |
| Purchase | Investment property, two to four units | 75% |
| Refinance | Limited cash-out (rate-and-term), one-unit principal residence | 95% |
| Refinance | Cash-out, one-unit principal residence | 80% |
| Refinance | Cash-out, two to four units, second home or investment | 75% |
| Combined LTV | Maximum contribution |
|---|---|
| above 90 percent | 3% of the sales price |
| 75.01 to 90 percent | 6% of the sales price |
| 75 percent or less | 9% of the sales price |
| investment property (any) | 2% of the sales price |
| Event | Waiting period |
|---|---|
| Chapter 7 or 11 bankruptcy | four years from discharge or dismissal (two years with documented extenuating circumstances) |
| Chapter 13 bankruptcy | two years from discharge; four years from dismissal (two with extenuating circumstances) |
| Multiple bankruptcy filings | five years when more than one filing within the past seven years |
| Foreclosure | seven years (three with extenuating circumstances, then limited to a principal residence or second home at 90 percent LTV, purchase or limited cash-out) |
| Deed-in-lieu, short sale or mortgage charge-off | four years (two with extenuating circumstances) |
Mortgage insurance: Fannie Mae reports that private mortgage insurance typically ranged from 0.58%–1.86% of the loan amount a year; the premium on a specific loan is priced by the insurer on the score, the leverage, and the coverage, and is never quoted here. Gifts from relatives may fund the entire down payment on a one-unit principal residence. HomeReady and Home Possible lend to 97% with income at or below 80% of the area median; HomeOne lends to the same leverage with a first-time buyer and no income limit.
Current conventional snapshot · updated October 3, 2026 · principal residences occupied within sixty days, second homes, and one- to four-unit investment properties · conforming limits apply by county and are confirmed by a Lendmire loan officer · above the limit, see the jumbo program · no prepayment penalty · Lendmire is a broker, never the lender.
Not a commitment to lend, not an offer of credit, not a quote. The figures shown are current conforming program parameters and wholesale overlays that change without notice and apply only after full underwriting of the borrower and the property; the mortgage insurance range is Fannie Mae’s published typical range and the premium on any loan is set by the insurer. Conforming loan limits apply by county. Lendmire is a mortgage broker licensed in sixteen states for consumer mortgages, never the lender. NMLS #2371349.
What a conventional loan is — and how the file is qualified.
Nearly every Tumwater conventional file is read by an automated underwriting system against the agencies’ guides, and the few written by hand follow the manual columns of the same rules. The system does not change the rules below; it applies them: the leverage the occupancy allows, how the score is read, when mortgage insurance attaches and ends, and what the ratios and reserves must show.
For the program overview, see Lendmire’s conventional loan program, or the statewide guide at Conventional Loans in Washington; for the mortgage insurance cancellation rules, see the CFPB.
Leverage by occupancy and buyer
Who the buyer is matters as much as what the home is. A first-time buyer, meaning no ownership interest in a home for three years, qualifies for the smallest down payment on a principal residence; a repeat buyer starts a little higher; and HomeReady, Home Possible, and HomeOne open the top leverage to buyers who meet their conditions.
Credit scores and automated underwriting
The automated system, DU on the Fannie Mae side and LPA on the Freddie Mac side, reads the whole credit file rather than a single number: the score, the depth of history, the recent events, and the seasoning after any derogatory event. The score it uses with more than one borrower is the average of the median scores.
Mortgage insurance that cancels
Insurance structures vary: borrower-paid monthly is the default, and lender-paid, single-premium, and split-premium versions exist, each built into the loan differently. The published typical range in the snapshot is Fannie Mae’s, and the actual premium for a Tumwater file comes from the insurer at lock, never from this page.
Ratios, reserves, and the DU finding
The automated finding is the hinge of a conventional file: it reads the income, the assets, the credit, and the property, allows a total debt ratio up to the automated maximum, and names the reserves the file must show. A Tumwater underwriter then verifies what the finding assumed.
The calculator runs this on a Tumwater scenario and adds the piece most calculators skip: the month on the amortization schedule when the balance reaches the request and automatic-termination thresholds, so the payment after the insurance ends is visible beside the payment before.
Where Tumwater buyers borrow — and how a conforming loan fits.
The leverage limits are percentages; the market turns them into dollars. The Census figures below describe Tumwater’s ownership, home values, and household income, the backdrop every conforming loan here is sized against.
These are context figures, not underwriting inputs. Income sets the ratio, value sets the loan and the premium, and the down payment sets the leverage. The Census describes the first two for the market; the file supplies all three for the borrower.
Data sources: U.S. Census Bureau — ACS 5-Year (2024) housing and population estimates, including tenure, home values, gross rents, and household income.
Distinct Tumwater neighborhoods, distinct conventional files.
The house and its use decide the file as much as the borrower. These Tumwater submarkets differ in the property types, the occupancies, and the prices a typical buyer carries, which is what the cards below describe.
Investor and second-home purchases
An investor buying a Tumwater unit to rent uses the conventional program at the investment leverage, documents the rent the agencies allow, and shows reserves for every financed property; the agencies cap how many such loans one borrower may carry. Tumwater is home to about 27K people and sits within the Olympia-Lacey-Tumwater, WA area.
Two-to-four-unit homes
Owner occupancy of one unit sets the leverage on a Tumwater multi-unit conventional loan; without it, the property is an investment purchase at the lower investment leverage. The appraisal reads every unit and the rents. About 37% of Tumwater’s households rent — roughly 4,097 renter households on the latest Census estimate.
Newer infill and recent construction
A newer Tumwater home rarely draws condition notes; the file turns on the limit and the ratio at the higher price, with the insurance premium added to the payment where the leverage runs above the threshold. On a one-unit principal residence at Tumwater’s median value, the first-time buyer’s minimum down payment comes to about $14,200 and the standard minimum to about $23,600 — before closing costs, and before the mortgage insurance that comes with either; a second home, a multi-unit home, or a rental starts higher, as the leverage table shows.
Condominiums and townhomes
Townhomes in Tumwater finance like houses when they are fee simple and like condominiums when they are organized as one; the lender settles which before the appraisal, and the leverage follows the occupancy either way. Roughly 6,832 Tumwater households own their homes on the latest Census estimate — 63% of all households, the pool a conventional purchase joins.
Established close-in neighborhoods
The Tumwater blocks nearest the core carry the oldest houses, and a conventional appraisal reads them for value first and condition second: no HUD or VA property standard, but the home must be safe, sound, and marketable, and a failing roof or system still draws a condition note. Median household income in Tumwater sits near $95,212 on the latest Census estimate.
Higher-value homes
The higher-value Tumwater file is a limit question, not an eligibility question. The conforming limit caps the loan amount, and the buyer either adds down payment to fit under it or chooses the jumbo route for the whole purchase. The median owner-occupied home value in Tumwater runs near $472,200 on the latest Census estimate.
Across all of Tumwater, five questions settle a conventional loan: what the appraisal supports, whether the property passes the agencies’ review, how the home will be occupied, what the score costs, and what the ratio and reserves allow.
Four ways Tumwater buyers put a conforming loan to work.
A good use of a conventional loan is one its shape fits: a decent score, a down payment of any size from the minimum up, an occupancy the agencies allow, and a loan inside the conforming limit. Four common Tumwater uses follow.
Refinance or take cash out
A Tumwater owner can refinance a conventional loan two ways: a limited cash-out refinance to the rate-and-term leverage in the snapshot, or a cash-out refinance to the lower cash-out leverage after the seasoning period, on a principal residence, second home, or rental at each occupancy’s own limit.
Buy a condominium in a warrantable project
A Tumwater condominium is a conventional purchase when the project passes the agencies’ review: owner-occupancy mix, budget and reserves, litigation, commercial space, and ownership concentration. The dues enter the ratio, and the leverage follows the occupancy as it would on a house.
Buy a second home
For the Tumwater vacation or weekend home, the conforming loan is usually the only consumer route: FHA and VA finance principal residences only. The down payment is larger, the reserves are deeper, and the score prices the loan the same way it does on any conventional purchase.
Buy a first home at the first-time-buyer minimum
The first purchase on a conventional loan starts at the first-time buyer’s minimum in the snapshot, with the whole amount allowed as a family gift. A Tumwater buyer with a solid score may pay less each month than on FHA because the insurance is priced on the score and ends; the comparison is run on the actual numbers.
Estimate the payment on a Tumwater price before requesting a quote.
Enter a Tumwater price, the down payment, and the buyer type, choose a term, and the calculator returns the loan and its loan-to-value, principal and interest, the estimated mortgage insurance while the loan is above the threshold, taxes and insurance, the payment after the insurance ends, and the ratio if you enter income. It also shows the month the balance reaches the cancellation thresholds. The rate field holds the weekly Freddie Mac benchmark as a market reference, never a quote.
Tumwater conventional payment estimate
The starting figures are a Tumwater price at the first-time buyer’s minimum down payment. Replace them with yours.
Editable benchmark: 7.28% as of October 1, 2026 · Freddie Mac 30-year average via FRED®. A conventional market reference, not a conventional loan quote.
Estimate seeded at the low end of Fannie Mae’s published range (0.58%–1.86% a year); the insurer prices the actual premium on the score and the leverage. Applies only above 80% loan-to-value.
Illustrative starting assumptions: a $470,000 price near Tumwater’s median owner-occupied home value, the first-time buyer’s minimum down payment, a thirty-year term at the current Freddie Mac benchmark, mortgage insurance at the low end of Fannie Mae’s published range, property taxes and insurance estimated for Washington (U.S. Census Bureau). Every field is editable.
Illustrative estimate only — not a Loan Estimate, approval, quote, or commitment to lend. The rate field carries the weekly Freddie Mac thirty-year conventional benchmark, a market reference and not a conventional loan quote; your rate is set by the lender at lock. The mortgage insurance figure is an editable estimate seeded from Fannie Mae’s published typical range, not a premium quote; the insurer prices the actual premium, and the cancellation month assumes scheduled payments with no extra principal and no change in value. Taxes, insurance and dues are editable estimates; closing costs are not included. Conforming loan limits apply by county. Licensed in sixteen states for consumer mortgages.
Same buyer, three very different closings.
Most buyers can close the same purchase three ways, and the structures differ more than the labels suggest: conventional with insurance that cancels, FHA with a small investment and premiums for the life of the loan at full leverage, or VA with nothing down and no insurance for the eligible veteran.
Conventional, FHA, or VA.
The program’s strengths are the cancellable insurance, the breadth of occupancies, and a cost structure that rewards a strong score; its weakness is the same structure applied to a weak one. A Tumwater buyer with a strong score usually pays less each month here than on FHA.
FHA’s leverage is high and its credit standard is forgiving, but its insurance is priced by schedule rather than by score and does not cancel on a full-leverage thirty-year loan. A Tumwater buyer comparing the two sees the premium line stay on FHA and disappear on conventional. See Lendmire’s FHA loan program.
For an eligible veteran, service member, or surviving spouse, the VA loan drops the down payment and monthly insurance for a one-time funding fee that many disabled veterans do not pay. Where eligible, it usually beats conventional for a Tumwater principal residence; conventional still wins the second home and rental. See Lendmire’s VA loan program.
The decision is rarely close once the profile is known. Conventional tends to win for a strong score and for every non-primary occupancy, FHA for a modest score, and VA for nearly any eligible principal residence. The comparison is run on the actual numbers, in writing. Above the conforming limit, see the jumbo loan program.
What to prepare for a Tumwater scenario review.
The paperwork is the standard mortgage set, with the automated finding deciding how much of it the file actually needs; here is what a Tumwater scenario review typically draws on.
This is a general preparation guide, not a universal checklist. The selected lender may request additional information based on the transaction, the property, the automated underwriting finding, and the income picture. Nothing here is legal or tax advice.
Local details that can change the loan.
What moves a Tumwater file most often: the insurance and its cancellation, the score and the cost it sets, the appraisal, the condominium review, the conforming limit, the ratio and the reserves, the occupancy rule, and the seasoning after a credit event.
Use these checks to keep the Tumwater file clean and fundable.
Before asking for a quote, know three answers: how much insurance the leverage carries and for how long, what the score does to the price, and whether the property and the loan amount fit the conforming program.
- Plan the insurance: twenty percent down carries no insurance at all.
- Confirm the score: the score sets the loan-level adjustments and the insurance premium more than it gates the loan.
- Check the project: the project must pass the agencies’ review to be warrantable.
Mortgage insurance: how much, and until when
The premium on a Tumwater loan can be paid monthly, paid by the lender in exchange for a different price, paid as a single premium at closing, or split. The monthly structure cancels under the federal rules, and the others are set by the lender. The calculator shows the monthly structure and the month the thresholds arrive on scheduled payments.
The score sets the cost
The score does two jobs on a Tumwater file: it feeds the automated assessment alongside the rest of the credit file, and it sets the cost of the loan and the insurance. A buyer close to a cost tier sometimes gains more from a short wait and a paid-down balance than from any other change.
Warrantable or not
Project review is the one property question that can take a Tumwater condominium out of the program entirely. The lender collects the association’s questionnaire, budget, and insurance before the appraisal, and a buyer under contract should ask early how the project reads.
The conforming limit
Conforming loans are capped by county and by unit count, with higher limits in high-cost areas, and the FHFA resets the figures each year. A Tumwater purchase whose loan would run above the limit brings a larger down payment, uses the high-balance range where the county has one, or moves to jumbo; a loan officer confirms the current county limit.
Second homes, rentals, and financed-property limits
Of the three programs compared on this page, the conventional loan is the one that reaches a Tumwater second home or rental, and it does so with conditions: lower leverage, deeper reserves, adjustments for the occupancy, and a limit on the number of financed properties one borrower may carry.
From a Tumwater pre-approval to keys in hand.
A conventional purchase runs in a fixed order: pre-approval through the automated system on the score, the ratio, and the reserves; contract and appraisal or value acceptance; underwriting that verifies what the finding assumed; and closing with the insurance structure set. Here is that order for a Tumwater buyer.
Pre-approval
A Tumwater pre-approval is a sizing exercise run through the automated system: the score, the income, the assets, the occupancy, and the price. The finding sets the ratio room and the reserves, and the loan officer puts the pre-approval in writing for the offer.
Contract and appraisal
The Tumwater contract sets the price and the contributions; the appraisal, or the system’s value acceptance, sets the value. Both feed the loan amount, and the lender confirms the project review and the conforming limit before underwriting begins.
Underwriting
The underwriter verifies what the automated finding assumed: income, assets and reserves, credit and any seasoning, occupancy, and the property. A manual file follows the lower ratio pair instead. Conditions are issued, documented, and cleared before final approval.
Closing
The Tumwater closing applies the program’s structure: the insurance premium in the payment while it applies, the escrow account, and no upfront premium on the monthly structure. The buyer moves in within sixty days on a principal residence, and the servicer tracks the balance toward the cancellation thresholds.
A brokerage that prices the whole market.
A single lender prices a conventional loan one way; a brokerage with several wholesale programs prices it several ways and shows a Tumwater buyer which one costs less on the same score and leverage, with the insurance quoted by the insurer rather than guessed.
Several programs, one set of numbers
A lender with one rate sheet sells that sheet; a brokerage with several can say which fits. For a Tumwater buyer with a strong score that is usually a conventional loan on the program whose cost is lowest for that file; for a modest score it may be FHA, and the arithmetic decides.
The insurance explained before the offer
The insurance is the program’s cost and the cancellation rules are its advantage, and Lendmire explains both first rather than last: how much the premium is, which structure fits, and when it ends for a Tumwater buyer at the price in hand.
Licensed, consumer-purpose, in writing
Lendmire carries the license for the state the Tumwater home is in, delivers the disclosures a consumer mortgage requires, and commits the terms to paper. The program figures on this page are read from one guideline source built on the agencies’ published guides.
Trusted by buyers & families alike.
Tumwater conventional loan FAQs
The questions below come up on nearly every Tumwater conventional conversation. The answers are general; the figures in the snapshot above are the program’s current parameters.
What is a conventional loan, and who is it for?
A conventional loan is the mortgage a Tumwater buyer with good credit should compare first: a low down payment for the first-time buyer, insurance that cancels, no upfront premium, and the breadth to finance a second home or a rental under the same rules.
How much do I need to put down on a conventional loan in Tumwater?
Less than most people expect on a principal residence, and it can be a gift from family. The trade for a small down payment is mortgage insurance, which cancels as the balance falls; the calculator shows the Tumwater payment with it and without it.
What credit score do I need for a conventional loan?
A conventional loan prices credit rather than simply gating it. The practical floor is the wholesale overlay in the snapshot; the agencies’ own minimum applies only to manual underwriting. Above the floor, the premium and the loan-level adjustments fall as the score rises.
How does private mortgage insurance work, and when does it end?
Three dates matter: the month the balance reaches the request threshold, when the borrower can ask the servicer to drop the premium with a good payment history; the month it reaches the termination threshold, when the servicer must drop it; and the midpoint of the term, the final backstop. Twenty percent down means none of this applies.
What is the conforming loan limit in Tumwater?
The limit is the first thing confirmed on a Tumwater file near the top of the market. These pages state the program’s structure rather than a number that changes every year; the current figure comes from a loan officer.
Can I use a conventional loan to buy a condominium?
In a warrantable project. A Tumwater buyer under contract on a condominium should have the lender start the project review early, because a project that fails is outside the conforming program and goes to a portfolio lender on other terms.
What happens after my Tumwater offer is accepted?
Appraisal first, then underwriting, then conditions, then closing. The appraisal or the value acceptance sets the value; the underwriter verifies what the finding assumed; the closing funds the loan at the leverage chosen and starts a payment with the insurance line if one applies.
What are HomeReady, Home Possible, and HomeOne?
Agency programs that open the top conventional leverage to buyers who meet their conditions: HomeReady from Fannie Mae and Home Possible from Freddie Mac for borrowers with income at or below the area-median threshold in the snapshot, with reduced insurance coverage and a homeownership course; HomeOne from Freddie Mac for first-time buyers with no income limit. Each is a conventional loan with its own rules on top.
Can I buy a second home with a conventional loan?
It is the usual route to a Tumwater second home, since FHA and VA finance principal residences only. Expect a larger down payment than on a principal residence, deeper reserves, and adjustments for the occupancy.
Is a conventional loan assumable?
Not the fixed-rate loan. Some conventional ARMs permit assumption, and the note says which. A Tumwater owner thinking about selling into a higher-rate market should know the loan does not transfer.
Conventional, FHA, or VA for Tumwater: compared on your numbers.
A Tumwater conventional purchase starts with three questions: the score, the down payment, and the occupancy. Lendmire answers them, prices the programs, and writes up the one that fits.
This guide covers Tumwater — for the statewide guidelines, markets, and scenarios, see Conventional Loans in Washington, part of Lendmire’s conventional loan program.
Nearby markets in Washington: Olympia · Lacey · Lakewood · Tacoma · Federal Way · Bremerton · Auburn · Port Orchard
Related programs: FHA Loans · Jumbo Loans · Refinance Loans