Current Washington hard money guidelines, updated from one source.
Every figure below renders from Lendmire’s centralized hard money standards source and refreshes automatically when program guidance changes. Final terms stay specific to the borrower, the property, the documented track record, and the selected lending partner.
Maximum loan-to-cost
Top tier for investors with five or more completed projects; 90% with two or more. First-time investors qualify at lower tiers.
Maximum bridge leverage
Purchase without rehab, measured against both the purchase price and the value. Property that needs time rather than work, refinanced once stabilized.
Maximum cash-out LTV
Cash-out and refinance ceiling against current value. Proceeds depend on the payoff, costs, the exit, and complete underwriting.
Minimum FICO
Additional conditions apply under 660. Underwriting is asset-based; the published floor does not by itself reach the top leverage tier.
Every fix-and-flip tier is separately capped at this share of the after-repair value.
Released in draws against completed, inspected work — not at closing.
Interest-only payments; no prepayment penalty.
Current standard-program snapshot · updated August 28, 2026. Loan amounts up to $5,000,000, larger by exception. Ground-up construction up to 90% of cost for builders with three or more completed projects, to 10 units. Figures are outer bounds, not offers; Lendmire is a mortgage broker, not a lender.
Business-purpose financing available in 40 markets, including Washington, D.C. In Washington, eligible projects are reviewed on the property, the plan, the documented track record, and the exit, with the top leverage tiers reserved for experienced investors.
What a Washington hard money loan is — and how the approval works.
A hard money loan is short-term, business-purpose financing secured by non-owner-occupied real estate. Instead of qualifying primarily through personal-income calculations, the lender starts with the property, the purchase price, the budget, the after-repair value, and the exit — then weighs the investor’s documented experience.
The asset and the plan lead the analysis
Underwriting asks what the property is worth today, what it will be worth once the work is complete, and whether the budget and timeline get it there. The more convincing the answers, the more leverage may be on the table.
Leverage is tiered by documented experience
The highest leverage tiers belong to investors with a record of completed projects. First-time investors qualify at lower tiers rather than being turned away, and the snapshot above shows where each tier stands today.
Rehab funds in draws, not at closing
The rehab portion of the loan funds as work is completed and inspected rather than at closing. Budget, scope, contractor, and draw schedule belong in the file from day one rather than being added later.
The exit is underwritten alongside the loan
A sale or a refinance into long-term financing is how the note gets repaid. Lenders want to see that path before closing — and planning the refinance early is where a broker who works both products earns the fee.
Total project cost generally means the purchase price plus the rehab or build budget. Loan-to-cost is capped by the investor’s experience tier, and every tier is separately capped as a share of the after-repair value. The live program cards above show the current ceilings, while the calculator below lets you model your own Washington project. The lender sets the final numbers from the appraisal, the scope of work, and the complete file.
A statewide market that supports several distinct project types.
Washington combines established metros, growing employment centers, university and workforce housing, and communities where older housing stock creates renovation demand. Each project type carries different purchase, rehab, resale, and refinance considerations.
Statewide figures provide general market context, not project-level underwriting. A lender still evaluates the subject property’s purchase price, scope of work, after-repair value, exit, and program eligibility.
Data source: U.S. Census Bureau QuickFacts — Washington, including the 2025 population estimate and population change from the April 1, 2020 estimates base, 2020–2024 median value of owner-occupied housing units, and 2020–2024 median gross rent.
Distinct Washington markets, distinct project considerations.
Hard money lenders in Washington work across very different projects — metro rehabs, workforce-housing flips, small multifamily repositions, and new construction — and purchase prices, renovation scope, resale depth, and refinance demand shape how each file is underwritten.
Seattle
Vacation and seasonal housing shapes the Seattle market, so a rehab here is often planned around a short-term-rental exit rather than a conventional sale. Association rules, insurance, and the resale calendar sit next to the after-repair value in the file. The Census puts Seattle at about 754K people; owner-occupied homes carry a median value near $938.6K, gross rent runs around $2,030, and roughly 56% of households rent.
Spokane
Spokane is a principal city in its metro, with the employment base that supports both rehab resale and new construction. Files here are underwritten on the after-repair or completed value measured against recent comparable sales in the same submarket. Population is roughly 230K by Census estimate, median owner-occupied value about $363.5K, median gross rent close to $1,215, and about 41% of Spokane households are renters.
Tacoma
With the employment base of a metro principal city, Tacoma carries both renovation resale and new construction. Lenders set the after-repair or completed value against recent sales in the same submarket rather than the wider metro. Census estimates put the Tacoma population near 223K, with a median owner-occupied value around $479.6K, median gross rent near $1,676, and renters in about 44% of households.
Vancouver
A renter-heavy Vancouver housing market favors the small multifamily reposition — a bridge or rehab loan to acquire and improve an under-managed building, then a DSCR refinance on the stabilized rent roll once the units are turned. The Census puts Vancouver at about 195K people; owner-occupied homes carry a median value near $462.4K, gross rent runs around $1,702, and roughly 49% of households rent.
Bellevue
Bellevue sits at the premium end of the state, so loan sizes climb and the after-repair value has to be supported by genuinely comparable sales. Substantial renovations with a defined exit are the projects that tend to work here. Population is roughly 152K by Census estimate, median owner-occupied value about $1.34M, median gross rent close to $2,572, and about 48% of Bellevue households are renters.
Kent
For Kent, the typical hard money file is a single-family renovation or a bridge purchase: purchase price, scope of work, and an after-repair value supported by comparable sales, with a resale or a rental refinance as the exit. By Census estimate, Kent has roughly 136K residents, a median owner-occupied value of about $587.8K, median gross rent around $1,909, and renter households near 43%.
Lendmire can review eligible investment-property projects in other Washington communities as well. Availability remains subject to the property, the program, and the current lending footprint.
Four ways Washington investors can use hard money.
Here are the core transaction paths available for eligible Washington investment properties. The right structure depends on the project, the after-repair value, the investor’s experience, credit, reserves, and current lender guidelines.
Fix-and-flip loans
Purchase and rehab budget in one loan, with the rehab funded in draws against completed work. Leverage is set by the investor’s experience tier and capped against the after-repair value.
Bridge purchase loans
Buy a Washington property that needs time rather than work — vacancy, condition, or a seller who will not wait for a conventional file — then refinance into long-term financing once it is stabilized.
Cash-out and refinance
Use the equity in a free-and-clear or low-leverage investment property to fund the next acquisition or rehab, within the cash-out ceiling shown in the current snapshot, with the exit underwritten alongside the loan.
Ground-up construction
Ground-up residential construction up to the unit count in the snapshot, with leverage tiered by the builder’s completed projects and capped against the completed value, and the build budget funded in draws.
Model a Washington project before requesting a quote.
The calculator preloads editable Washington sample assumptions for purchase price, rehab budget, and after-repair value, and its leverage tiers refresh from Lendmire’s centralized hard money standards source. Change any field; the result is a leverage estimate, not a loan offer.
Washington hard money calculator
Type in the purchase price, the rehab or build budget, and the after-repair value you expect the appraisal to support. What comes back is the estimated maximum loan at the selected experience tier, before closing costs and reserves.
Leverage tiers shown are the current program ceilings from Lendmire’s centralized hard money standards source.
Illustrative Washington starting assumptions are derived from the statewide median owner-occupied housing value. All fields are editable.
Illustrative leverage estimate only; nothing here is a cost quote or a loan offer. Leverage ceilings are outer bounds tiered by documented experience; the actual loan amount, draw schedule, reserves, and eligibility depend on the appraisal, the scope of work, and complete underwriting by the selected lender.
What lenders still review after the leverage math.
Leverage gets the attention, but the loan-to-cost ceiling is only one part of the file. A complete Washington hard money review also takes in the investor’s track record and liquidity, the property’s current and after-repair value, the scope of work, and the exit.
Same investment property, different point in its life.
Short-term and asset-based. The lender underwrites the purchase, the budget, the after-repair value, and the exit, sets leverage by documented experience, and funds the rehab in draws. Designed for property that is not yet stabilized.
Long-term and cash-flow-based. When the property is renovated and rented, a DSCR loan qualifies on the rental income relative to the monthly payment, which is the typical take-out for a completed Washington hard money project.
Many Washington projects use both: hard money to buy and renovate, then a DSCR refinance on the stabilized rent roll. Because Lendmire arranges both, the exit is planned before the first draw is funded.
What to prepare for a Washington hard money review.
Exact documentation varies, but these four categories give an investor a practical starting point before requesting a project-specific quote.
This is a general preparation guide, not a universal document checklist. The selected lender may request additional information based on the property, borrower, entity, project, and underwriting findings.
Local details that can change the leverage decision.
Washington costs, property characteristics, and project logistics can materially change a hard money result or a property’s eligibility. Check the practical issues below before relying on a target leverage or a projected after-repair value.
Use these checks to keep the Washington file clean and fundable.
The exact treatment varies by lending partner, so the goal here is not to promise a universal outcome. It is to spotlight the main issues an investor should resolve before closing.
After-repair value support
Every leverage tier is capped against the after-repair value the lender accepts, which comes from an appraisal or valuation and recent comparable sales, not from the investor’s projection. Optimistic Washington value assumptions are the most common reason a file lands at a lower loan amount than expected.
Scope, budget, and draw inspections
The draw schedule comes from a line-item scope of work with a contingency, a contractor, and a realistic timeline. Because draws release only against completed, inspected work, a thin budget or a missing permit stops the project, not just the file.
Coastal insurance, flood, and wind
Coastal Washington projects add wind and flood exposure to the builder’s-risk or vacant-property coverage the lender requires. Premiums, deductibles, and availability change the carrying-cost budget and can affect the rental refinance that repays the note, so settle the insurance picture before closing.
Entity vesting and title
Business-purpose loans are commonly vested in an LLC or other entity, with personal guarantees from the members. Formation documents, ownership information, and clean title should be in hand before closing so the entity does not become the reason a closing slips.
The exit and the timeline
Because hard money is short-term, the sale or refinance that repays it has to land inside the term. When a Washington property will be held as a rental, mapping the DSCR refinance up front — seasoning, rent support, and leverage — keeps the exit from turning into a scramble at maturity.
From a Washington project to closing.
Lead with the property and the plan, weigh the available structures, document the project, and move through underwriting toward closing and the exit.
Run the project
Share the Washington property details, purchase price, budget, after-repair value, experience, credit range, and timing.
Compare partners
Lendmire weighs multiple hard money and private money options for leverage, draw process, experience fit, and property appetite.
Document the project
Finish the appraisal or valuation, scope of work, contractor, insurance, title, entity, and asset documentation the lender requires.
Close and exit
Lock the structure, fund the purchase, draw against completed work, and carry out the sale or the refinance on schedule.
A brokerage built around investor projects.
Washington projects run from a first cosmetic flip to ground-up construction and multi-property portfolios. Those files do not all belong with the same lender.
Partner comparison
Lendmire compares multiple hard money and private money partners rather than forcing every Washington project into one institution’s box.
Investor specialization
The review centers on leverage, experience tiers, draw mechanics, entity vesting, reserves, property type, and the exit strategy.
The exit, planned early
Lendmire also arranges DSCR financing, so the refinance that repays the hard money note can be planned before the first draw is funded.
Trusted by buyers & investors alike.
Washington hard money loan FAQs
These answers address the purchase, rehab, construction, entity, leverage, and exit questions Washington investors commonly raise. Final program terms remain project-specific.
Can I use a hard money loan to buy a Washington fix-and-flip property?
Yes. Eligible Washington investment properties can be bought and renovated on a hard money loan through select lending partners: one loan for the purchase and the rehab budget, rehab funded in draws against completed work, and leverage tiered by documented experience and capped against the after-repair value in the current snapshot.
How do I compare hard money lenders in Washington?
Compare them on the things that change your outcome: the leverage tier your experience actually qualifies for, how rehab draws are inspected and released, how the after-repair value is established, which property types and Washington markets they accept, and how the exit is treated. Lendmire compares multiple hard money and private money partners on exactly those factors before a file is placed.
What is the exit on a Washington hard money loan?
A sale once the work is done, or a refinance into long-term financing — for a rented property that is typically a DSCR loan qualified on the rental income. Lenders want the path visible before closing, and since Lendmire also arranges DSCR financing, the Washington refinance can be planned with the hard money loan.
Do I need experience to get a hard money loan in Washington?
No — first-time investors are eligible. Leverage is tiered by documented completed projects, so a first project qualifies at a lower tier than an investor with a longer record. The current snapshot shows where each tier sits today, and the calculator lets you model a Washington project at your own tier.
Can hard money fund ground-up construction in Washington?
Yes. Eligible ground-up residential builds in Washington are financed up to the unit count in the snapshot, with leverage set by the builder’s completed projects and capped against the completed value. Plans, budget, builder information, and the exit are reviewed with the land value.
Does coastal insurance affect a Washington hard money project?
It can. Wind, flood, and builder’s-risk coverage on a coastal Washington property add to carrying costs and can affect the exit, especially when the take-out is a rental refinance. Lenders expect the insurance picture to be understood before closing rather than discovered during the draw schedule.
How is hard money different from a DSCR loan?
Hard money is short-term and asset-based: it funds the purchase and the renovation on the after-repair value and the plan, with leverage tiered by experience. A DSCR loan is long-term and cash-flow-based: it qualifies a rented property on its rental income. Many projects use both — hard money to renovate, DSCR to hold.
How are rehab draws funded?
The rehab portion of the loan is held back at closing and released against completed work, usually after an inspection or documented progress. The draw schedule is agreed up front from the scope of work, which is why a line-item budget and a contractor are part of the file from the start.
Can I close a Washington hard money loan in an LLC?
Yes — business-purpose hard money loans are commonly vested in an LLC, corporation, or partnership, and individual investors are eligible as well. Formation documents, ownership information, and personal guarantees are typically part of the file, and the closing team confirms the Washington title and entity requirements.
Does the after-repair value come from my estimate?
No — the lender sets the after-repair value from an appraisal or valuation and comparable sales rather than from your projection. Build your own estimate the same way, from recent nearby comparable sales, since every leverage tier is capped against the value the lender accepts.
Bring the Washington project. We will help structure the financing.
Bring a fix-and-flip, bridge purchase, cash-out, or ground-up construction scenario. No credit pull or commitment is required to request an initial review.
This guide is part of Lendmire’s hard money loan program — full qualification details, guidelines, and scenarios live there.
Related in Washington: DSCR Loans in Washington · Bank Statement Loans in Washington · Investment Property HELOC in Washington