Current San Francisco hard money guidelines, updated from one source.
Every figure below renders from Lendmire’s centralized hard money standards source and refreshes automatically when program guidance changes. Final terms stay specific to the borrower, the property, the documented track record, and the selected lending partner.
Maximum loan-to-cost
Top tier for investors with five or more completed projects; 90% with two or more. First-time investors qualify at lower tiers.
Maximum bridge leverage
Purchase without rehab, measured against both the purchase price and the value. Property that needs time rather than work, refinanced once stabilized.
Maximum cash-out LTV
Cash-out and refinance ceiling against current value. Proceeds depend on the payoff, costs, the exit, and complete underwriting.
Minimum FICO
Additional conditions apply under 660. Underwriting is asset-based; the published floor does not by itself reach the top leverage tier.
Every fix-and-flip tier is separately capped at this share of the after-repair value.
Released in draws against completed, inspected work — not at closing.
Interest-only payments; no prepayment penalty.
Current standard-program snapshot · updated August 28, 2026. Loan amounts up to $5,000,000, larger by exception. Ground-up construction up to 90% of cost for builders with three or more completed projects, to 10 units. Figures are outer bounds, not offers; Lendmire is a mortgage broker, not a lender.
Business-purpose financing available in 40 markets, including Washington, D.C. In San Francisco, Census estimates put the population near 830,235, the median owner-occupied value around $1.39M, median gross rent near $2,476, and renters in about 61.8% of households — market context for a hard money file, not project underwriting.
What a San Francisco hard money loan is — and how the approval works.
A hard money loan is short-term, business-purpose financing secured by non-owner-occupied real estate. The lender does not lead with personal-income calculations; it leads with the property, the purchase price, the budget, the after-repair value, and the exit, then weighs the investor’s documented experience.
The asset and the plan lead the analysis
Underwriting asks what the property is worth today, what it will be worth once the work is complete, and whether the budget and timeline get it there. The more convincing the answers, the more leverage may be on the table.
Leverage is tiered by documented experience
Investors with a record of completed projects reach the top leverage tiers. First-time investors start at lower tiers rather than being turned away, and the current snapshot above shows today’s position for each tier.
Rehab funds in draws, not at closing
Rather than funding at closing, the rehab portion is released against completed, inspected work. Budget, scope, contractor, and draw schedule are built into the file from the start, not added later.
The exit is underwritten alongside the loan
A sale or a refinance into long-term financing is how the note gets repaid. Lenders want to see that path before closing — and planning the refinance early is where a broker who works both products earns the fee.
Total project cost generally means the purchase price plus the rehab or build budget. The investor’s experience tier caps loan-to-cost, and each tier is separately capped as a share of the after-repair value. The live program cards above show the current ceilings; the calculator below lets you model your own San Francisco project. The lender sets the final numbers from the appraisal, the scope of work, and the complete file.
A local market that supports several distinct project types.
San Francisco spans established neighborhoods, newer subdivisions, workforce housing, and older blocks where renovation demand is constant. Each project type comes with distinct purchase, rehab, resale, and refinance considerations.
These citywide figures give general market context and are not project-level underwriting. Purchase price, scope of work, after-repair value, exit, and program eligibility are still evaluated on the subject property.
Data source: U.S. Census Bureau QuickFacts — San Francisco, ACS 5-Year 2020–2024: total population, renter-occupied share of occupied housing units, median value of owner-occupied housing units, and median gross rent.
Distinct San Francisco submarkets, distinct project considerations.
Hard money lenders in San Francisco, CA encounter very different projects across the city, from cosmetic flips and full renovations to small multifamily repositions and new construction. Purchase prices, renovation scope, resale depth, and refinance demand shape how every file is underwritten.
Small Multifamily
A renter-heavy household mix gives San Francisco two-to-four-unit repositions a natural exit: bridge or rehab money to buy and turn the units, then a DSCR refinance on the stabilized rent roll.
Workforce Single-Family
San Francisco’s workforce single-family blocks keep first and second projects within reach — moderate budgets, an owner-occupant resale or a rental refinance as the exit, and an after-repair value measured against sales on nearby streets.
The Suburban Ring
The suburban neighborhoods around San Francisco favor full renovations that sell to families at completion, with a bridge purchase as the alternative when the property needs time rather than work. Comparable resales set the after-repair value.
Newer Stock and Light Rehab
Newer subdivisions in San Francisco rarely need a gut renovation; the hard money use here is a bridge purchase or a light rehab that stabilizes quickly and refinances into long-term financing. Leverage follows the experience tier, and the exit is usually the refinance.
The Premium Tier
At San Francisco price points, loan sizes climb and the after-repair value has to be supported by genuinely comparable sales. Substantial renovations with a defined resale or refinance exit are the projects that pencil here, not light cosmetic turns.
Condominium and Association Projects
San Francisco condominium projects put association documents, budgets, and rental rules into underwriting beside the scope of work, with a resale as the usual exit once the work is done.
Lendmire can also review eligible investment-property projects throughout the San Francisco area, from the core to the surrounding towns. Availability remains subject to the property, the program, and the current lending footprint.
What it looks like in this market.
Three composite projects built from how investors actually buy, renovate, and refinance here, each mapped to the leverage tier and exit that fits it.
High-value renovation, larger loan
An experienced investor takes on a substantial renovation at San Francisco price points, where the loan size and the after-repair value both draw a close read; the top leverage tier and comparable-sales support carry the file, and the exit is a resale.
Fit: experienced tier · larger loan sizes
Small multifamily, stabilized and refinanced
An investor acquires an under-managed two-to-four-unit building in San Francisco on bridge money, turns the units and the rent roll, and refinances into DSCR financing on the improved rents — the exit planned with Lendmire before the first draw.
Fit: bridge or rehab · DSCR refinance exit
Infill construction, builder tier
On a San Francisco teardown, an experienced builder finances land and construction together, draws against completed stages, and exits by resale or by refinancing the finished house into rental financing.
Fit: construction · completed-value cap
Four ways San Francisco investors can use hard money.
Four transaction paths cover most eligible San Francisco investment properties. The structure that fits depends on the project, the after-repair value, the investor’s experience, credit, reserves, and current lender guidelines.
Fix-and-flip loans
The purchase and the rehab budget close as one loan, with rehab dollars funded in draws against completed work. Leverage follows the investor’s experience tier and is capped against the after-repair value.
Bridge purchase loans
Take down a San Francisco property that needs time rather than construction — a vacancy, a condition item, a seller who will not wait for conventional financing — and refinance into long-term financing once it is stabilized.
Cash-out and refinance
Access equity in a paid-off or lightly leveraged investment property for the next purchase or rehab, within the cash-out ceiling shown above; the sale or refinance that repays the note is reviewed with the loan.
Ground-up construction
Residential new construction up to the unit count in the snapshot, with leverage tiered by the builder’s completed projects, capped against the completed value, and the build budget released in draws.
Model a San Francisco project before requesting a quote.
Start from editable San Francisco sample assumptions for purchase price, rehab budget, and after-repair value, with leverage tiers that refresh from Lendmire’s centralized hard money standards source. Every field is editable, and the result is a leverage estimate, not a loan offer.
San Francisco hard money calculator
Provide the purchase price, the rehab or build budget, and the after-repair value you expect the appraisal to support; the calculator returns the estimated maximum loan for the selected experience tier, before closing costs and reserves.
Leverage tiers shown are the current program ceilings from Lendmire’s centralized hard money standards source.
Illustrative San Francisco starting assumptions are derived from the citywide median owner-occupied housing value. All fields are editable.
Illustrative leverage estimate only; nothing here is a cost quote or a loan offer. Leverage ceilings are outer bounds tiered by documented experience; the actual loan amount, draw schedule, reserves, and eligibility depend on the appraisal, the scope of work, and complete underwriting by the selected lender.
What lenders still review after the leverage math.
Leverage gets the attention, but the loan-to-cost ceiling is only one part of the file. A complete San Francisco hard money review also takes in the investor’s track record and liquidity, the property’s current and after-repair value, the scope of work, and the exit.
Same investment property, different point in its life.
Short-term and asset-based. Underwriting covers the purchase, the budget, the after-repair value, and the exit; leverage is tiered by documented experience and the rehab funds in draws. Made for property that is not yet stabilized.
Long-term and cash-flow-based. After the property is renovated and rented, a DSCR loan qualifies on the rental income relative to the monthly payment — the usual take-out for a completed San Francisco hard money project.
San Francisco projects often run on both: hard money to buy and renovate, then a DSCR refinance once the rent roll is stabilized. Lendmire arranges both, so the exit is planned before the first draw is funded.
What to prepare for a San Francisco hard money review.
The exact list varies, but these four categories are a practical starting point for an investor before requesting a project-specific quote.
This is a general preparation guide rather than a universal document checklist. The selected lender may request additional information based on the property, borrower, entity, project, and underwriting findings.
Local details that can change the leverage decision.
Local costs, property characteristics, and project logistics in San Francisco can materially change a hard money result or a property’s eligibility. Review the practical issues below before relying on a target leverage or a projected after-repair value.
Use these checks to keep the San Francisco file clean and fundable.
Treatment varies by lending partner, so the goal is not to promise a universal outcome — it is to spotlight the main issues an investor should resolve before closing.
After-repair value support
The lender’s after-repair value — from an appraisal or valuation and recent comparable sales — caps every leverage tier, and it will not match an optimistic projection. In San Francisco files, an unsupported value is the most frequent reason the loan comes in below expectations.
Scope, budget, and draw inspections
The draw schedule comes from a line-item scope of work with a contingency, a contractor, and a realistic timeline. Because draws release only against completed, inspected work, a thin budget or a missing permit stops the project, not just the file.
Coastal insurance, flood, and wind
On coastal San Francisco property, wind and flood exposure sit on top of the builder’s-risk or vacant-property coverage the lender requires. Premiums, deductibles, and availability move the carrying-cost budget and can change the rental refinance that repays the note — resolve them before closing.
Entity vesting and title
Business-purpose loans are commonly vested in an LLC or other entity, with personal guarantees from the members. Formation documents, ownership information, and clean title should be ready before closing so the entity never becomes the reason a closing slips.
The exit and the timeline
Hard money is short-term, so the sale or refinance that repays it has to land inside the term. For a San Francisco property that will be rented, planning the DSCR refinance at the start — seasoning, rent support, leverage — keeps the exit from becoming a scramble when the note comes due.
From a San Francisco project to closing.
Lead with the property and the plan, weigh the available structures, document the project, and move through underwriting toward closing and the exit.
Run the project
Provide the San Francisco property details, purchase price, budget, after-repair value, experience, credit range, and timing.
Compare partners
Lendmire weighs multiple hard money and private money options for leverage, draw process, experience fit, and property appetite.
Document the project
Complete the appraisal or valuation, scope of work, contractor, insurance, title, entity, and asset documentation the lender requires.
Close and exit
Settle the structure, fund the purchase, draw against completed work, and complete the sale or the refinance on schedule.
A brokerage built around investor projects.
From a first cosmetic flip to ground-up construction and multi-property portfolios, San Francisco projects vary widely — and they do not all belong with the same lender.
Partner comparison
Lendmire can compare multiple hard money and private money partners instead of forcing every San Francisco project into one institution’s box.
Investor specialization
The review centers on leverage, experience tiers, draw mechanics, entity vesting, reserves, property type, and the exit that repays the note.
The exit, planned early
Lendmire also arranges DSCR financing, so the refinance that repays the hard money note can be planned before the first draw is funded.
Trusted by buyers & investors alike.
San Francisco hard money loan FAQs
These answers address the purchase, rehab, construction, entity, leverage, and exit questions San Francisco investors commonly raise. Final program terms remain project-specific.
Can I use a hard money loan to buy a San Francisco fix-and-flip property?
Yes — eligible San Francisco investment properties can be purchased and renovated with a hard money loan through select lending partners. The purchase and the rehab budget close as one loan, the rehab funds in draws against completed work, and leverage is tiered by documented experience and capped against the after-repair value shown in the current snapshot.
How do I compare hard money lenders in San Francisco, CA?
Compare them on the things that change your outcome: the leverage tier your experience actually qualifies for, how rehab draws are inspected and released, how the after-repair value is established, which property types and San Francisco markets they accept, and how the exit is treated. Lendmire compares multiple hard money and private money partners on exactly those factors before a file is placed.
Do I need experience to get a hard money loan in San Francisco?
No. First-time investors are eligible; leverage simply steps up with documented completed projects, so a first project starts at a lower tier than a seasoned investor’s. The snapshot shows today’s tiers, and the calculator models a San Francisco project at yours.
What is the exit on a San Francisco hard money loan?
Either a sale after the renovation or a refinance into long-term financing — for a rented property, usually a DSCR loan that qualifies on the rental income. Lenders want that path visible before closing, and because Lendmire arranges DSCR financing as well, the San Francisco refinance can be planned alongside the hard money loan.
Can hard money fund ground-up construction in San Francisco?
Yes. Eligible ground-up residential builds in San Francisco are financed up to the unit count in the snapshot, with leverage set by the builder’s completed projects and capped against the completed value. Plans, budget, builder information, and the exit are reviewed with the land value.
Does coastal insurance affect a San Francisco hard money project?
It can — wind, flood, and builder’s-risk coverage on a coastal San Francisco property raise carrying costs and can change the exit, particularly when the take-out is a rental refinance. Lenders want that insurance picture settled before closing, not uncovered mid-project.
Is a hard money loan a consumer mortgage in San Francisco?
No. Hard money and private money loans arranged through Lendmire are business-purpose loans on non-owner-occupied San Francisco investment property — not consumer mortgages — and the property cannot serve as the borrower’s residence.
Does the after-repair value come from my estimate?
No — the lender sets the after-repair value from an appraisal or valuation and comparable sales rather than from your projection. Build your own estimate the same way, from recent nearby comparable sales, since every leverage tier is capped against the value the lender accepts.
What should I submit for a San Francisco hard money quote?
Begin with the property address or market, the project type, the purchase price or payoff, the rehab or build budget, the expected after-repair value, your completed projects, the entity holding title, your credit range, and the timeline. From there a loan officer identifies what else the selected lender needs for a San Francisco file.
Can I refinance or take cash out of a San Francisco investment property with hard money?
Yes, within the cash-out and refinance ceiling shown in the current snapshot. Cash-out is commonly used to fund the next San Francisco acquisition or rehab, and the lender underwrites the exit on the cash-out loan the same way it does on a purchase.
Bring the San Francisco project. We will help structure the financing.
Begin with a fix-and-flip, bridge purchase, cash-out, or ground-up construction scenario. No credit pull or commitment is required to request an initial review.
This page is San Francisco-specific — for guidelines and scenarios statewide, visit Hard Money Loans in California within Lendmire’s hard money loan program.
Also in San Francisco: DSCR Loans in San Francisco, CA