Current Aurora hard money guidelines, updated from one source.
Every figure below comes from Lendmire’s centralized hard money standards source and refreshes when current program guidance changes. Final terms are set on the borrower, the property, the documented track record, and the selected lending partner.
Maximum loan-to-cost
Top tier for investors with five or more completed projects; 90% with two or more. First-time investors qualify at lower tiers.
Maximum bridge leverage
Purchase without rehab, measured against both the purchase price and the value. Property that needs time rather than work, refinanced once stabilized.
Maximum cash-out LTV
Cash-out and refinance ceiling against current value. Proceeds depend on the payoff, costs, the exit, and complete underwriting.
Minimum FICO
Additional conditions apply under 660. Underwriting is asset-based; the published floor does not by itself reach the top leverage tier.
Every fix-and-flip tier is separately capped at this share of the after-repair value.
Released in draws against completed, inspected work — not at closing.
Interest-only payments; no prepayment penalty.
Current standard-program snapshot · updated August 28, 2026. Loan amounts up to $5,000,000, larger by exception. Ground-up construction up to 90% of cost for builders with three or more completed projects, to 10 units. Figures are outer bounds, not offers; Lendmire is a mortgage broker, not a lender.
Business-purpose financing available in 41 markets, including Washington, D.C. In Aurora, Census estimates put the population near 394,432, the median owner-occupied value around $469.1K, median gross rent near $1,835, and renters in about 37.6% of households — market context for a hard money file, not project underwriting.
What an Aurora hard money loan is — and how the approval works.
A hard money loan is short-term, business-purpose financing secured by non-owner-occupied real estate. The lender does not lead with personal-income calculations; it leads with the property, the purchase price, the budget, the after-repair value, and the exit, then weighs the investor’s documented experience.
The asset and the plan lead the analysis
Underwriting turns on what the property is worth today, what it should be worth once the work is done, and whether the budget and timeline actually get it there. A stronger story can open more leverage.
Leverage is tiered by documented experience
A record of completed projects unlocks the top leverage tiers. First-time investors start at lower tiers rather than being turned away, and the current snapshot above shows where each tier stands today.
Rehab funds in draws, not at closing
Rather than funding at closing, the rehab portion is released against completed, inspected work. Budget, scope, contractor, and draw schedule are built into the file from the start, not added later.
The exit is underwritten alongside the loan
The loan is repaid by a sale or by a refinance into long-term financing, and lenders expect to see that path before closing. Planning the refinance early is where a broker who works both products earns the fee.
Total project cost generally means the purchase price plus the rehab or build budget. Loan-to-cost is limited by the investor’s experience tier, with every tier also capped as a share of the after-repair value. The live program cards above carry the current ceilings, and the calculator below models your own Aurora project. The lender sets the final numbers from the appraisal, the scope of work, and the complete file.
A local market that supports several distinct project types.
Aurora spans established neighborhoods, newer subdivisions, workforce housing, and older blocks where renovation demand is constant. Each project type comes with distinct purchase, rehab, resale, and refinance considerations.
Citywide figures provide general market context, not project-level underwriting. A lender still evaluates the subject property’s purchase price, scope of work, after-repair value, exit, and program eligibility.
Data source: U.S. Census Bureau QuickFacts — Aurora, ACS 5-Year 2020–2024: total population, renter-occupied share of occupied housing units, median value of owner-occupied housing units, and median gross rent.
Distinct Aurora submarkets, distinct project considerations.
Hard money lenders in Aurora, CO underwrite very different projects across the city — cosmetic flips, full renovations, small multifamily repositions, and new construction. Purchase prices, renovation scope, resale depth, and refinance demand all shape each file.
Newer Stock and Light Rehab
In the newer parts of Aurora, projects are lighter — cosmetic work or a bridge purchase on a house that needs time rather than construction — and the exit is typically a refinance into long-term financing once the property is stabilized.
Condominium and Association Projects
Aurora condominium projects put association documents, budgets, and rental rules into underwriting beside the scope of work, with a resale as the usual exit once the work is done.
Infill and Ground-Up Construction
Infill lots and teardowns in Aurora support ground-up builds underwritten on the completed value and the builder’s completed projects, with plans, budget, and exit reviewed together with the land.
Older Housing Stock
On Aurora’s older blocks, roofs, systems, and structure come with the finishes, so the scope and contingency are read line by line, draws follow inspected work, and renovated comparables set the after-repair value.
The Rental Refinance Exit
Some of the most repeatable Aurora projects never sell: buy on hard money, renovate, lease, and refinance into a DSCR loan on the property’s rent. Because Lendmire arranges both loans, the take-out is underwritten before the first draw.
The Urban Core
In Aurora’s core, attached housing dominates: condominiums, townhomes, rowhouses. Lenders review the association package with the scope of work, and the same resale depth that supports the exit means the after-repair value has to hold up against many comparable sales.
Lendmire can review eligible investment-property projects throughout the Aurora area as well, from the core to the surrounding towns. Availability remains subject to the property, the program, and the current lending footprint.
What it looks like in this market.
Three composite projects built from how investors actually buy, renovate, and refinance here, each mapped to the leverage tier and exit that fits it.
Infill construction, builder tier
A builder with completed projects takes an infill lot in Aurora to a finished house, with leverage tiered by track record, capped against the completed value, and the build budget released in draws; the exit is a resale or a rental refinance.
Fit: construction · completed-value cap
First flip, cosmetic scope
A first Aurora project: a dated single-family purchase with a cosmetic budget, one loan for purchase and rehab at the first experience tier, draws released as work is inspected, and a resale to an owner-occupant at the accepted after-repair value.
Fit: purchase plus rehab · first-tier leverage
Cash-out to fund the next project
An investor with a free-and-clear Aurora rental pulls equity on a hard money cash-out at the current ceiling to fund the next acquisition, with the exit — a sale or a refinance — underwritten just as it would be on a purchase.
Fit: cash-out · exit underwritten
Four ways Aurora investors can use hard money.
These are the core transaction paths available for eligible Aurora investment properties. The right structure depends on the project, the after-repair value, the investor’s experience, credit, reserves, and current lender guidelines.
Fix-and-flip loans
Purchase and rehab budget in one loan, with the rehab funded in draws against completed work. Leverage is set by the investor’s experience tier and capped against the after-repair value.
Bridge purchase loans
Take down an Aurora property that needs time rather than construction — a vacancy, a condition item, a seller who will not wait for conventional financing — and refinance into long-term financing once it is stabilized.
Cash-out and refinance
Use the equity in a free-and-clear or low-leverage investment property to fund the next acquisition or rehab, within the cash-out ceiling shown in the current snapshot, with the exit underwritten alongside the loan.
Ground-up construction
Residential new construction up to the unit count in the snapshot, with leverage tiered by the builder’s completed projects, capped against the completed value, and the build budget released in draws.
Model an Aurora project before requesting a quote.
The calculator opens with editable Aurora sample assumptions for purchase price, rehab budget, and after-repair value. Leverage tiers refresh from Lendmire’s centralized hard money standards source. Every field is editable, and the result is a leverage estimate, not a loan offer.
Aurora hard money calculator
Type in the purchase price, the rehab or build budget, and the after-repair value you expect the appraisal to support. What comes back is the estimated maximum loan at the selected experience tier, before closing costs and reserves.
Leverage tiers displayed here are the current program ceilings drawn from Lendmire’s centralized hard money standards source.
Illustrative Aurora starting assumptions are derived from the citywide median owner-occupied housing value. All fields are editable.
This is an illustrative leverage estimate, not a cost quote or a loan offer. The ceilings are outer bounds tiered by documented experience; the actual loan amount, draw schedule, reserves, and eligibility are set by the appraisal, the scope of work, and complete underwriting by the selected lender.
What lenders still review after the leverage math.
The loan-to-cost ceiling is the headline, but it is only one part of the file. A complete Aurora hard money review also covers the investor’s track record and liquidity, the property’s current and after-repair value, the scope of work, and the exit.
Same investment property, different point in its life.
Short-term, asset-based financing. The purchase, the budget, the after-repair value, and the exit are underwritten; leverage is tiered by documented experience and rehab dollars are released in draws. Built for property that is not yet stabilized.
Long-term financing that qualifies on cash flow. Once the property is renovated and leased, a DSCR loan measures the rent against the monthly payment — the usual take-out for a completed Aurora hard money project.
Many Aurora projects run on both products — hard money to buy and renovate, then a DSCR refinance on the stabilized rent roll. Since Lendmire arranges both, the exit is planned before the first draw is funded.
What to prepare for an Aurora hard money review.
Documentation varies by lender and project, but these four categories give an investor a practical starting point before requesting a project-specific quote.
This is a general preparation guide, not a universal document checklist. The selected lender may request additional information based on the property, borrower, entity, project, and underwriting findings.
Local details that can change the leverage decision.
Costs, property characteristics, and project logistics particular to Aurora can materially change a hard money result or a property’s eligibility. Go through the practical issues below before relying on a target leverage or a projected after-repair value.
Use these checks to keep the Aurora file clean and fundable.
Treatment varies by lending partner, so the goal here is not to promise a universal outcome. It is to spotlight the main issues an investor should resolve before closing.
After-repair value support
The lender’s after-repair value — from an appraisal or valuation and recent comparable sales — caps every leverage tier, and it will not match an optimistic projection. In Aurora files, an unsupported value is the most frequent reason the loan comes in below expectations.
Scope, budget, and draw inspections
The draw schedule comes from a line-item scope of work with a contingency, a contractor, and a realistic timeline. Because draws release only against completed, inspected work, a thin budget or a missing permit stops the project, not just the file.
Wildfire exposure and insurance
In parts of Aurora, wildfire exposure limits which carriers will write builder’s-risk or vacant-property coverage and at what cost. Confirm insurability for the specific address before relying on a budget or a rental-refinance exit.
Entity vesting and title
Business-purpose loans are commonly vested in an LLC or other entity, with personal guarantees from the members. Formation documents, ownership information, and clean title should be in hand before closing so the entity does not become the reason a closing slips.
Winter schedules and the timeline
Winter in Aurora can compress exterior work, inspections, and resale into a narrower window. Build the season into the draw schedule and the exit so the sale or refinance that repays the note still lands inside the term.
From an Aurora project to closing.
Begin with the property and the plan, compare the available structures, document the project, and move through underwriting toward closing and the exit.
Run the project
Send the Aurora property details, purchase price, budget, after-repair value, experience, credit range, and timing.
Compare partners
Lendmire compares multiple hard money and private money options for leverage, draw process, experience fit, and exit flexibility.
Document the project
Complete the appraisal or valuation, scope of work, contractor, insurance, title, entity, and asset documentation the lender requires.
Close and exit
Settle the structure, fund the purchase, draw against completed work, and complete the sale or the refinance on schedule.
A brokerage built around investor projects.
Aurora projects range from a first cosmetic flip to ground-up construction and multi-property portfolios. Those files do not all belong with the same lender.
Partner comparison
Instead of forcing every Aurora project into a single lender’s leverage box, Lendmire compares multiple hard money and private money partners.
Investor specialization
Leverage, experience tiers, draw mechanics, entity vesting, reserves, property type, and the exit that repays the note are the focus of the review.
The exit, planned early
Because Lendmire also arranges DSCR financing, the refinance that repays the hard money note can be planned before the purchase closes.
Trusted by buyers & investors alike.
Aurora hard money loan FAQs
These answers cover the purchase, rehab, construction, entity, leverage, and exit questions Aurora investors commonly raise. Final program terms remain project-specific.
Can I use a hard money loan to buy an Aurora fix-and-flip property?
Yes — eligible Aurora investment properties can be purchased and renovated with a hard money loan through select lending partners. The purchase and the rehab budget close as one loan, the rehab funds in draws against completed work, and leverage is tiered by documented experience and capped against the after-repair value shown in the current snapshot.
Do I need experience to get a hard money loan in Aurora?
No. First-time investors are eligible; leverage simply steps up with documented completed projects, so a first project starts at a lower tier than a seasoned investor’s. The snapshot shows today’s tiers, and the calculator models an Aurora project at your tier.
How do I compare hard money lenders in Aurora, CO?
Weigh the terms that actually move your result — the leverage tier your documented experience qualifies for, how draws are inspected and released, how the after-repair value is set, which property types and Aurora neighborhoods the lender will fund, and how the exit is underwritten. Lendmire compares multiple hard money and private money partners on exactly those factors before placing a file.
What is the exit on an Aurora hard money loan?
A sale once the work is done, or a refinance into long-term financing — for a rented property that is typically a DSCR loan qualified on the rental income. Lenders want the path visible before closing, and since Lendmire also arranges DSCR financing, the Aurora refinance can be planned with the hard money loan.
Can hard money fund ground-up construction in Aurora?
Yes — eligible ground-up residential projects in Aurora can be financed up to the unit count shown in the snapshot, with leverage tiered by the builder’s completed projects and capped against the completed value. Plans, budget, builder information, and the exit are reviewed alongside the land value.
How is hard money different from a DSCR loan?
Hard money is short-term and asset-based: it funds the purchase and the renovation on the after-repair value and the plan, with leverage tiered by experience. A DSCR loan is long-term and cash-flow-based: it qualifies a rented property on its rental income. Many projects use both — hard money to renovate, DSCR to hold.
What should I submit for an Aurora hard money quote?
Begin with the property address or market, the project type, the purchase price or payoff, the rehab or build budget, the expected after-repair value, your completed projects, the entity holding title, your credit range, and the timeline. From there a loan officer identifies what else the selected lender needs for an Aurora file.
Can I refinance or take cash out of an Aurora investment property with hard money?
Yes — up to the cash-out and refinance ceiling in the current snapshot. Investors often use cash-out to fund the next Aurora acquisition or rehab, and the exit on a cash-out loan is underwritten just as it is on a purchase.
How long is a hard money loan?
Hard money is short-term: the current snapshot shows the term range, payments are interest-only during the term, and the current program carries no prepayment penalty. It is designed to be repaid by the exit — a sale or a refinance — not carried for years.
Does the after-repair value come from my estimate?
No. The lender establishes the after-repair value from an appraisal or valuation and comparable sales, not from the investor’s projection. Your estimate should be built the same way — recent, nearby, comparable sales — because every leverage tier is capped against the value the lender accepts.
Bring the Aurora project. We will help structure the financing.
Bring a fix-and-flip, bridge purchase, cash-out, or ground-up construction scenario. No credit pull or commitment is required to request an initial review.
This page is Aurora-specific — for guidelines and scenarios statewide, visit Hard Money Loans in Colorado within Lendmire’s hard money loan program.
Nearby markets in Colorado: Denver · Centennial · Commerce City · Parker · Thornton · Lakewood · Westminster · Castle Rock
Other loan programs in Aurora: DSCR Loans in Aurora, CO · Super Jumbo DSCR Loans in Aurora, CO · Short-Term Rental Loans in Aurora, CO · Investment Property Cash-Out Refinance in Aurora, CO · Bank Statement Loans in Aurora, CO · Super Jumbo Bank Statement Loans in Aurora, CO · Bank Statement HELOC in Aurora, CO · Investment Property HELOC in Aurora, CO