Current Manhattan hard money guidelines, updated from one source.
Every figure below renders from Lendmire’s centralized hard money standards source and refreshes automatically when program guidance changes. Final terms stay specific to the borrower, the property, the documented track record, and the selected lending partner.
Maximum loan-to-cost
Top tier for investors with five or more completed projects; 90% with two or more. First-time investors qualify at lower tiers.
Maximum bridge leverage
Purchase without rehab, measured against both the purchase price and the value. Property that needs time rather than work, refinanced once stabilized.
Maximum cash-out LTV
Cash-out and refinance ceiling against current value. Proceeds depend on the payoff, costs, the exit, and complete underwriting.
Minimum FICO
Additional conditions apply under 660. Underwriting is asset-based; the published floor does not by itself reach the top leverage tier.
Every fix-and-flip tier is separately capped at this share of the after-repair value.
Released in draws against completed, inspected work — not at closing.
Interest-only payments; no prepayment penalty.
Current standard-program snapshot · updated August 28, 2026. Loan amounts up to $5,000,000, larger by exception. Ground-up construction up to 90% of cost for builders with three or more completed projects, to 10 units. Figures are outer bounds, not offers; Lendmire is a mortgage broker, not a lender.
Business-purpose financing available in 40 markets, including Washington, D.C. In Manhattan, Census estimates put the population near 54,239, the median owner-occupied value around $246.7K, median gross rent near $1,003, and renters in about 56.5% of households — market context for a hard money file, not project underwriting.
What a Manhattan hard money loan is — and how the approval works.
A hard money loan is short-term, business-purpose financing secured by non-owner-occupied real estate. The file is read from the asset outward: the property, the purchase price, the budget, the after-repair value, and the exit come first, and the investor’s documented experience is weighed alongside them rather than personal-income calculations.
The asset and the plan lead the analysis
Underwriting turns on what the property is worth today, what it should be worth once the work is done, and whether the budget and timeline actually get it there. A stronger story can open more leverage.
Leverage is tiered by documented experience
Investors with a record of completed projects reach the top leverage tiers. First-time investors start at lower tiers rather than being turned away, and the current snapshot above shows today’s position for each tier.
Rehab funds in draws, not at closing
Rather than funding at closing, the rehab portion is released against completed, inspected work. Budget, scope, contractor, and draw schedule are built into the file from the start, not added later.
The exit is underwritten alongside the loan
The note is repaid by a sale or a refinance into long-term financing. Lenders want that path visible before closing — and planning the refinance early is where a broker who works both products earns the fee.
Total project cost generally means the purchase price plus the rehab or build budget. The investor’s experience tier caps loan-to-cost, and each tier is separately capped as a share of the after-repair value. The live program cards above show the current ceilings; the calculator below lets you model your own Manhattan project. The lender sets the final numbers from the appraisal, the scope of work, and the complete file.
A local market that supports several distinct project types.
Manhattan combines established neighborhoods, newer subdivisions, workforce housing, and blocks where older housing stock creates renovation demand. Each project type carries different purchase, rehab, resale, and refinance considerations.
Citywide figures provide general market context, not project-level underwriting. A lender still evaluates the subject property’s purchase price, scope of work, after-repair value, exit, and program eligibility.
Data source: U.S. Census Bureau QuickFacts — Manhattan, ACS 5-Year 2020–2024: total population, renter-occupied share of occupied housing units, median value of owner-occupied housing units, and median gross rent.
Distinct Manhattan submarkets, distinct project considerations.
Hard money lenders in Manhattan, KS underwrite very different projects across the city — cosmetic flips, full renovations, small multifamily repositions, and new construction. Purchase prices, renovation scope, resale depth, and refinance demand all shape each file.
Older Housing Stock
The older blocks of Manhattan are where full renovations live: roofs, systems, and structure alongside finishes, with a scope of work and contingency the lender reads line by line before releasing draws. The exit is usually a resale supported by nearby renovated comparables.
The Rental Refinance Exit
In Manhattan, many investors hold rather than sell: hard money funds the purchase and renovation, the property is leased, and a DSCR refinance repays the note. Arranging both loans in one place keeps the exit planned from the start.
Small Multifamily
Renters make up a large share of Manhattan households, which supports the value-add small multifamily play: acquire an under-managed two-to-four-unit building on bridge or rehab money, turn the units, and refinance into DSCR financing on the improved rent roll.
Workforce Single-Family
Manhattan’s workforce single-family blocks keep first and second projects within reach — moderate budgets, an owner-occupant resale or a rental refinance as the exit, and an after-repair value measured against sales on nearby streets.
The Suburban Ring
In Manhattan’s suburban ring, the buyer at the end of a project is usually an owner-occupant, so lenders underwrite full renovations to the resale exit and bridge purchases to a refinance once the house is stabilized.
Newer Stock and Light Rehab
Newer subdivisions in Manhattan rarely need a gut renovation; the hard money use here is a bridge purchase or a light rehab that stabilizes quickly and refinances into long-term financing. Leverage follows the experience tier, and the exit is usually the refinance.
Lendmire can also review eligible investment-property projects throughout the Manhattan area, from the core to the surrounding towns. Availability remains subject to the property, the program, and the current lending footprint.
What it looks like in this market.
Three composite projects reflecting how investors actually buy, renovate, and refinance here — each paired with the leverage tier and exit that fits it.
Small multifamily, stabilized and refinanced
On a Manhattan small multifamily reposition, hard money funds the acquisition and the unit turns, and a DSCR refinance on the stabilized rent roll repays the note — Lendmire arranges both, so the exit is planned up front.
Fit: bridge or rehab · DSCR refinance exit
Infill construction, builder tier
A builder with completed projects takes an infill lot in Manhattan to a finished house, with leverage tiered by track record, capped against the completed value, and the build budget released in draws; the exit is a resale or a rental refinance.
Fit: construction · completed-value cap
First flip, cosmetic scope
A first Manhattan project: a dated single-family purchase with a cosmetic budget, one loan for purchase and rehab at the first experience tier, draws released as work is inspected, and a resale to an owner-occupant at the accepted after-repair value.
Fit: purchase plus rehab · first-tier leverage
Four ways Manhattan investors can use hard money.
Eligible Manhattan investment properties can take several transaction paths. Which structure fits depends on the project, the after-repair value, the investor’s experience, credit, reserves, and current lender guidelines.
Fix-and-flip loans
One loan covers the purchase and the rehab budget, with the rehab funded in draws against completed work. The investor’s experience tier sets the leverage, capped against the after-repair value.
Bridge purchase loans
For a Manhattan property that is not yet conventional-ready because of vacancy, condition, or timing, a bridge loan closes it at the bridge ceiling and a refinance into long-term financing repays the note once it is stabilized.
Cash-out and refinance
Draw equity out of a free-and-clear or low-leverage investment property to fund the next acquisition or renovation, up to the cash-out ceiling in the current snapshot, with the exit underwritten alongside the loan.
Ground-up construction
Ground-up residential builds up to the unit count shown above; the builder’s completed projects set the leverage tier, the completed value caps it, and the construction budget is funded through draws.
Model a Manhattan project before requesting a quote.
The calculator preloads editable Manhattan sample assumptions for purchase price, rehab budget, and after-repair value, and its leverage tiers refresh from Lendmire’s centralized hard money standards source. Change any field; the result is a leverage estimate, not a loan offer.
Manhattan hard money calculator
Type in the purchase price, the rehab or build budget, and the after-repair value you expect the appraisal to support. What comes back is the estimated maximum loan at the selected experience tier, before closing costs and reserves.
Leverage tiers shown are the current program ceilings from Lendmire’s centralized hard money standards source.
Starting assumptions for Manhattan are illustrative and come from the citywide median owner-occupied housing value. Edit any field.
An illustrative leverage estimate only — not a cost quote and not a loan offer. Leverage ceilings are outer bounds tiered by documented experience, and the loan amount, draw schedule, reserves, and eligibility that actually apply come from the appraisal, the scope of work, and full underwriting by the selected lender.
What lenders still review after the leverage math.
Leverage gets the attention, but the loan-to-cost ceiling is only one part of the file. A complete Manhattan hard money review also takes in the investor’s track record and liquidity, the property’s current and after-repair value, the scope of work, and the exit.
Same investment property, different point in its life.
Short-term, asset-based financing. The purchase, the budget, the after-repair value, and the exit are underwritten; leverage is tiered by documented experience and rehab dollars are released in draws. Built for property that is not yet stabilized.
Long-term financing that qualifies on cash flow. Once the property is renovated and leased, a DSCR loan measures the rent against the monthly payment — the usual take-out for a completed Manhattan hard money project.
Many Manhattan projects run on both products — hard money to buy and renovate, then a DSCR refinance on the stabilized rent roll. Since Lendmire arranges both, the exit is planned before the first draw is funded.
What to prepare for a Manhattan hard money review.
Documentation varies by lender and project, but these four categories give an investor a practical starting point before requesting a project-specific quote.
This is a general preparation guide rather than a universal document checklist. The selected lender may request additional information based on the property, borrower, entity, project, and underwriting findings.
Local details that can change the leverage decision.
In Manhattan, local costs, property characteristics, and project logistics can materially change a hard money result or a property’s eligibility. Check the practical issues below before relying on a target leverage or a projected after-repair value.
Use these checks to keep the Manhattan file clean and fundable.
Because treatment differs by lending partner, this is not a promise of a universal outcome; it spotlights the main issues an investor should settle before closing.
After-repair value support
Every leverage tier is capped against the after-repair value the lender accepts, which comes from an appraisal or valuation and recent comparable sales, not from the investor’s projection. Optimistic Manhattan value assumptions are the most common reason a file lands at a lower loan amount than expected.
Scope, budget, and draw inspections
The draw schedule comes from a line-item scope of work with a contingency, a named contractor, and a realistic timeline. Because draws are released only against completed, inspected work, a thin budget or a missing permit stalls the project instead of the paperwork.
Insurance during the project
A vacant or under-renovation Manhattan property is insured with builder’s-risk or vacant-property coverage rather than a standard landlord policy, with the lender named on it; cost and availability belong in the carrying-cost budget before closing.
Entity vesting and title
Business-purpose loans are commonly vested in an LLC or other entity, with personal guarantees from the members. Formation documents, ownership information, and clean title should be ready before closing so the entity never becomes the reason a closing slips.
Winter schedules and the timeline
In Manhattan, winter narrows the window for exterior work, inspections, and resale. Plan the draw schedule and the exit around the season so the sale or refinance that repays the note still lands inside the term.
From a Manhattan project to closing.
Lead with the property and the plan, weigh the available structures, document the project, and move through underwriting toward closing and the exit.
Run the project
Provide the Manhattan property details, purchase price, budget, after-repair value, experience, credit range, and timing.
Compare partners
Multiple hard money and private money options are compared on leverage, draw mechanics, experience fit, and how flexible the exit is.
Document the project
Complete the appraisal or valuation, scope of work, contractor, insurance, title, entity, and asset documentation the lender requires.
Close and exit
Lock the structure, fund the purchase, draw against inspected work, and carry out the sale or refinance that retires the note.
A brokerage built around investor projects.
Manhattan projects range from a first cosmetic flip to ground-up construction and multi-property portfolios. Those files do not all belong with the same lender.
Partner comparison
Lendmire compares multiple hard money and private money partners rather than forcing every Manhattan project into one institution’s box.
Investor specialization
Leverage, experience tiers, draw mechanics, entity vesting, reserves, property type, and the exit that repays the note are the focus of the review.
The exit, planned early
Lendmire arranges DSCR financing as well, so the refinance that retires the hard money note is planned before the purchase closes.
Trusted by buyers & investors alike.
Manhattan hard money loan FAQs
The answers below take up the purchase, rehab, construction, entity, leverage, and exit questions Manhattan investors commonly raise. Final program terms remain project-specific.
Can I use a hard money loan to buy a Manhattan fix-and-flip property?
Yes. Eligible Manhattan investment properties can be bought and renovated with a hard money loan through select lending partners: purchase and rehab budget close as one loan, the rehab is released in draws against inspected work, and leverage follows the experience tier shown in the snapshot above.
What is the exit on a Manhattan hard money loan?
A sale once the renovation is complete, or a refinance into long-term financing — typically a DSCR loan on a rented Manhattan property. Lenders expect to see that path before closing, and because Lendmire arranges the DSCR refinance too, the exit is planned before the first draw.
How do I compare hard money lenders in Manhattan, KS?
Weigh the terms that actually move your result — the leverage tier your documented experience qualifies for, how draws are inspected and released, how the after-repair value is set, which property types and Manhattan neighborhoods the lender will fund, and how the exit is underwritten. Lendmire compares multiple hard money and private money partners on exactly those factors before placing a file.
Do I need experience to get a hard money loan in Manhattan?
No. First-time investors qualify; leverage is tiered by documented completed projects, so a first Manhattan project starts at a lower tier than a seasoned investor’s file. The snapshot above shows where every tier sits today.
Can hard money fund ground-up construction in Manhattan?
Yes — eligible ground-up residential projects in Manhattan can be financed up to the unit count shown in the snapshot, with leverage tiered by the builder’s completed projects and capped against the completed value. Plans, budget, builder information, and the exit are reviewed alongside the land value.
What documents does a hard money lender typically ask for?
Expect identification and credit authorization, entity documents for an LLC, a record of completed projects, the purchase contract or payoff, a line-item scope of work and budget, contractor information, comparable sales behind the after-repair value, proof of the cash to close, and insurance and title information. The lender may request more based on the project.
Is a hard money loan a consumer mortgage in Manhattan?
No. Hard money and private money loans through Lendmire are business-purpose loans on non-owner-occupied Manhattan investment property. They are not consumer mortgages, and the property cannot be the borrower’s residence.
Can I close a Manhattan hard money loan in an LLC?
Yes. Business-purpose hard money loans are routinely vested in an LLC, corporation, or partnership, and individual investors qualify as well. Expect to provide formation documents, ownership information, and personal guarantees, with entity eligibility confirmed against the full Manhattan file.
What should I submit for a Manhattan hard money quote?
The property address or market, the project type, the purchase price or payoff, the rehab or build budget, the expected after-repair value, your completed projects, the entity that will take title, your credit range, and the timeline. A loan officer then identifies what else the Manhattan file needs.
How is hard money different from a DSCR loan?
Hard money is short-term and asset-based, funding the purchase and the renovation on the after-repair value and the plan with experience-tiered leverage. A DSCR loan is long-term and cash-flow-based, qualifying a rented property on its rental income. Many projects use both: hard money to renovate, DSCR to hold.
Bring the Manhattan project. We will help structure the financing.
Start with a fix-and-flip, bridge purchase, cash-out, or ground-up construction scenario. No credit pull or commitment is required to request an initial review.
This page is Manhattan-specific — for guidelines and scenarios statewide, visit Hard Money Loans in Kansas within Lendmire’s hard money loan program.
Also in Manhattan: DSCR Loans in Manhattan, KS