Current Federal Way hard money guidelines, updated from one source.
The values below come from Lendmire’s centralized hard money standards source and update on their own when current program guidance moves. Final terms remain specific to the borrower, the property, the documented track record, and the selected lending partner.
Maximum loan-to-cost
Top tier for investors with five or more completed projects; 90% with two or more. First-time investors qualify at lower tiers.
Maximum bridge leverage
Purchase without rehab, measured against both the purchase price and the value. Property that needs time rather than work, refinanced once stabilized.
Maximum cash-out LTV
Cash-out and refinance ceiling against current value. Proceeds depend on the payoff, costs, the exit, and complete underwriting.
Minimum FICO
Additional conditions apply under 660. Underwriting is asset-based; the published floor does not by itself reach the top leverage tier.
Every fix-and-flip tier is separately capped at this share of the after-repair value.
Released in draws against completed, inspected work — not at closing.
Interest-only payments; no prepayment penalty.
Current standard-program snapshot · updated August 28, 2026. Loan amounts up to $5,000,000, larger by exception. Ground-up construction up to 90% of cost for builders with three or more completed projects, to 10 units. Figures are outer bounds, not offers; Lendmire is a mortgage broker, not a lender.
Business-purpose financing available in 40 markets, including Washington, D.C. By Census estimate, Federal Way has roughly 99,493 residents, a median owner-occupied value of about $552.8K, median gross rent around $1,797, and renter households near 44.7% — context for a hard money file, not project underwriting.
What a Federal Way hard money loan is — and how the approval works.
A hard money loan is short-term, business-purpose financing secured by non-owner-occupied real estate. The lender does not lead with personal-income calculations; it leads with the property, the purchase price, the budget, the after-repair value, and the exit, then weighs the investor’s documented experience.
The asset and the plan lead the analysis
Underwriting turns on what the property is worth today, what it should be worth once the work is done, and whether the budget and timeline actually get it there. A stronger story can open more leverage.
Leverage is tiered by documented experience
Top leverage tiers are reserved for investors with a record of completed projects. First-time investors qualify at lower tiers rather than being turned away, and the current snapshot above shows where each tier sits today.
Rehab funds in draws, not at closing
Rehab dollars are released against completed, inspected work rather than at closing. The budget, the scope, the contractor, and the draw schedule are all part of the file from the start, not added later.
The exit is underwritten alongside the loan
A sale or a refinance into long-term financing is how the note gets repaid. Lenders want to see that path before closing — and planning the refinance early is where a broker who works both products earns the fee.
Total project cost generally means the purchase price plus the rehab or build budget. Each experience tier caps loan-to-cost, and each tier is separately capped as a share of the after-repair value. The live program cards above show the current ceilings; the calculator below models your own Federal Way project. The lender sets the final numbers from the appraisal, the scope of work, and the complete file.
A local market with several distinct project types.
Federal Way combines established neighborhoods, newer subdivisions, workforce housing, and blocks where older housing stock creates renovation demand. Each project type carries different purchase, rehab, resale, and refinance considerations.
These citywide figures give general market context and are not project-level underwriting. Purchase price, scope of work, after-repair value, exit, and program eligibility are still evaluated on the subject property.
Data source: U.S. Census Bureau QuickFacts — Federal Way, ACS 5-Year 2020–2024: total population, renter-occupied share of occupied housing units, median value of owner-occupied housing units, and median gross rent.
Distinct Federal Way submarkets, distinct project considerations.
Hard money lenders in Federal Way, WA see very different projects across the city: cosmetic flips, full renovations, small multifamily repositions, and new construction. Purchase prices, renovation scope, resale depth, and refinance demand all shape how each file is underwritten.
Infill and Ground-Up Construction
Infill lots and teardowns in Federal Way support ground-up builds underwritten on the completed value and the builder’s completed projects, with plans, budget, and exit reviewed together with the land.
Older Housing Stock
In Federal Way’s older housing stock, projects go past cosmetics into roofs, systems, and structure, so the budget and contingency are reviewed line by line and draws follow inspected work. Renovated comparables nearby carry the after-repair value.
The Rental Refinance Exit
Buy, renovate, lease, refinance is a repeatable Federal Way play: hard money carries the purchase and the work, and a DSCR loan on the leased property repays it — both arranged in one place, so the exit is planned first.
The Urban Core
Where Federal Way concentrates density, hard money projects run to condominiums, townhomes, and attached stock. Association documents, master insurance, and rental rules come into the file with the scope of work, and the resale depth that makes the exit easy also makes the comparable sales unforgiving.
Small Multifamily
A renter-heavy household mix gives Federal Way two-to-four-unit repositions a natural exit: bridge or rehab money to buy and turn the units, then a DSCR refinance on the stabilized rent roll.
Workforce Single-Family
Workforce single-family stock in Federal Way keeps a first or second project within reach and gives the finished renovation two exits — resale or a rental refinance — which is why the after-repair value is measured against sales on nearby blocks.
Lendmire can review eligible investment-property projects throughout the Federal Way area as well, from the core to the surrounding towns. Availability remains subject to the property, the program, and the current lending footprint.
What it looks like in this market.
Three composite projects drawn from how investors actually buy, renovate, and refinance here — each mapped to the leverage tier and exit that fits it.
Small multifamily, stabilized and refinanced
A Federal Way two-to-four-unit building with below-market rents is bought on a bridge loan, renovated unit by unit, and refinanced into DSCR financing once the rent roll is stabilized; the refinance is mapped before closing.
Fit: bridge or rehab · DSCR refinance exit
Infill construction, builder tier
On a Federal Way teardown, an experienced builder finances land and construction together, draws against completed stages, and exits by resale or by refinancing the finished house into rental financing.
Fit: construction · completed-value cap
First flip, cosmetic scope
An investor with no completed projects takes down a tired single-family house in Federal Way, funds purchase and rehab in one loan at the first tier, draws as the work passes inspection, and exits by resale at the after-repair value the lender accepted.
Fit: purchase plus rehab · first-tier leverage
Four ways Federal Way investors can use hard money.
Eligible Federal Way investment properties can take several transaction paths. Which structure fits depends on the project, the after-repair value, the investor’s experience, credit, reserves, and current lender guidelines.
Fix-and-flip loans
Purchase and rehab budget in one loan, with the rehab funded in draws against completed work. Leverage is set by the investor’s experience tier and capped against the after-repair value.
Bridge purchase loans
For a Federal Way property that is not yet conventional-ready because of vacancy, condition, or timing, a bridge loan closes it at the bridge ceiling and a refinance into long-term financing repays the note once it is stabilized.
Cash-out and refinance
Use the equity in a free-and-clear or low-leverage investment property to fund the next acquisition or rehab, within the cash-out ceiling shown in the current snapshot, with the exit underwritten alongside the loan.
Ground-up construction
New residential construction up to the unit count shown in the snapshot, with leverage tiered by the builder’s completed projects and capped against the completed value, and the build budget funded in draws.
Model a Federal Way project before requesting a quote.
Editable Federal Way sample assumptions for purchase price, rehab budget, and after-repair value load first. Leverage tiers refresh from Lendmire’s centralized hard money standards source. Every field can be changed, and the result is a leverage estimate, not a loan offer.
Federal Way hard money calculator
Enter the purchase price, the rehab or build budget, and the after-repair value you expect the appraisal to support. The output is the estimated maximum loan at the selected experience tier, before closing costs and reserves.
Leverage tiers shown are the current program ceilings from Lendmire’s centralized hard money standards source.
Illustrative Federal Way starting assumptions are derived from the citywide median owner-occupied housing value. All fields are editable.
This is an illustrative leverage estimate, not a cost quote or a loan offer. The ceilings are outer bounds tiered by documented experience; the actual loan amount, draw schedule, reserves, and eligibility are set by the appraisal, the scope of work, and complete underwriting by the selected lender.
What lenders still review after the leverage math.
The loan-to-cost ceiling is the headline, but it is only one part of the file. A complete Federal Way hard money review also covers the investor’s track record and liquidity, the property’s current and after-repair value, the scope of work, and the exit.
Same investment property, different point in its life.
Short-term and asset-based. The lender underwrites the purchase, the budget, the after-repair value, and the exit, tiers leverage by documented experience, and funds the rehab in draws. Built for property that is not yet stabilized.
Long-term and cash-flow-based. When the property is renovated and rented, a DSCR loan qualifies on the rental income relative to the monthly payment, which is the typical take-out for a completed Federal Way hard money project.
Both products usually appear in one Federal Way project — hard money for the purchase and renovation, a DSCR refinance on the stabilized rent roll. Because Lendmire arranges both, the exit is settled before the first draw.
What to prepare for a Federal Way hard money review.
The exact list depends on the lender and the project; these four categories are a practical starting point before an investor requests a project-specific quote.
This is a preparation guide rather than a universal checklist; the selected lender may request more based on the property, the borrower, the entity, the project, and what underwriting finds.
Local details that can change the leverage decision.
Costs, property characteristics, and project logistics particular to Federal Way can materially change a hard money result or a property’s eligibility. Go through the practical issues below before relying on a target leverage or a projected after-repair value.
Use these checks to keep the Federal Way file clean and fundable.
Treatment varies by lending partner, so the goal here is not to promise a universal outcome. It is to spotlight the main issues an investor should resolve before closing.
After-repair value support
The lender’s after-repair value — from an appraisal or valuation and recent comparable sales — caps every leverage tier, and it will not match an optimistic projection. In Federal Way files, an unsupported value is the most frequent reason the loan comes in below expectations.
Scope, budget, and draw inspections
The draw schedule comes from a line-item scope of work with a contingency, a contractor, and a realistic timeline. Because draws release only against completed, inspected work, a thin budget or a missing permit stops the project, not just the file.
Coastal insurance, flood, and wind
On coastal Federal Way property, wind and flood exposure sit on top of the builder’s-risk or vacant-property coverage the lender requires. Premiums, deductibles, and availability move the carrying-cost budget and can change the rental refinance that repays the note — resolve them before closing.
Entity vesting and title
Business-purpose loans are commonly vested in an LLC or other entity, with personal guarantees from the members. Formation documents, ownership information, and clean title should be in hand before closing so the entity does not become the reason a closing slips.
The exit and the timeline
Because hard money is short-term, the sale or refinance that repays it has to land inside the term. When a Federal Way property will be held as a rental, mapping the DSCR refinance up front — seasoning, rent support, and leverage — keeps the exit from turning into a scramble at maturity.
From a Federal Way project to closing.
Begin with the property and the plan, compare the available structures, document the project, and move through underwriting toward closing and the exit.
Run the project
Send the Federal Way property details — purchase price, budget, after-repair value, experience, credit range, and the planned exit.
Compare partners
Multiple hard money and private money options are compared on leverage, draw mechanics, experience fit, and how flexible the exit is.
Document the project
Assemble the appraisal or valuation, scope of work, contractor, insurance, title, entity, and asset documentation the lender requires.
Close and exit
Lock the structure, fund the purchase, draw against inspected work, and carry out the sale or refinance that retires the note.
A brokerage built around investor projects.
Federal Way projects run from a first cosmetic flip to ground-up construction and multi-property portfolios. Those files do not all belong with the same lender.
Partner comparison
Lendmire can compare multiple hard money and private money partners rather than forcing every Federal Way project into one lender’s leverage box.
Investor specialization
Leverage, experience tiers, draw mechanics, entity vesting, reserves, property type, and the exit strategy are the focus of the review.
The exit, planned early
Because Lendmire also arranges DSCR financing, the refinance that repays the hard money note can be planned before the first draw is funded.
Trusted by buyers & investors alike.
Federal Way hard money loan FAQs
The answers below take up the purchase, rehab, construction, entity, leverage, and exit questions Federal Way investors commonly raise. Final program terms remain project-specific.
Can I use a hard money loan to buy a Federal Way fix-and-flip property?
Yes. Eligible Federal Way investment properties can be bought and renovated with a hard money loan through select lending partners: purchase and rehab budget close as one loan, the rehab is released in draws against inspected work, and leverage follows the experience tier shown in the snapshot above.
How do I compare hard money lenders in Federal Way, WA?
Weigh the terms that actually move your result — the leverage tier your documented experience qualifies for, how draws are inspected and released, how the after-repair value is set, which property types and Federal Way neighborhoods the lender will fund, and how the exit is underwritten. Lendmire compares multiple hard money and private money partners on exactly those factors before placing a file.
Do I need experience to get a hard money loan in Federal Way?
No — first-time investors are eligible. Leverage is tiered by documented completed projects, so a first project qualifies at a lower tier than an investor with a longer record. The current snapshot shows where each tier sits today, and the calculator lets you model a Federal Way project at your own tier.
What is the exit on a Federal Way hard money loan?
A sale once the work is done, or a refinance into long-term financing — for a rented property that is typically a DSCR loan qualified on the rental income. Lenders want the path visible before closing, and since Lendmire also arranges DSCR financing, the Federal Way refinance can be planned with the hard money loan.
Does coastal insurance affect a Federal Way hard money project?
It can — wind, flood, and builder’s-risk coverage on a coastal Federal Way property raise carrying costs and can change the exit, particularly when the take-out is a rental refinance. Lenders want that insurance picture settled before closing, not uncovered mid-project.
Can hard money fund ground-up construction in Federal Way?
Yes. Eligible ground-up residential builds in Federal Way can be financed up to the unit count in the snapshot, with leverage tiered by the builder’s completed projects and capped against the completed value; plans, budget, builder experience, and the exit are all reviewed with the land.
How are rehab draws funded?
The rehab portion is held back at closing and released as work is completed and inspected or documented. The schedule is agreed in advance from the line-item scope of work, so the budget you submit should reflect the real sequence of the job.
Does the after-repair value come from my estimate?
No. The lender establishes the after-repair value from an appraisal or valuation and comparable sales, not from the investor’s projection. Your estimate should be built the same way — recent, nearby, comparable sales — because every leverage tier is capped against the value the lender accepts.
Is a hard money loan a consumer mortgage in Federal Way?
No. Hard money and private money loans through Lendmire are business-purpose loans on non-owner-occupied Federal Way investment property. They are not consumer mortgages, and the property cannot be the borrower’s residence.
What should I submit for a Federal Way hard money quote?
Start with the property address or market, the project type, the purchase price or payoff, the rehab or build budget, the expected after-repair value, your completed projects, the entity that will hold title, your credit range, and the timeline. A loan officer can then identify the additional documents the selected lender needs for a Federal Way file.
Bring the Federal Way project. We will help structure the financing.
Start with a fix-and-flip, bridge purchase, cash-out, or ground-up construction scenario. No credit pull or commitment is required to request an initial review.
This page is Federal Way-specific — for guidelines and scenarios statewide, visit Hard Money Loans in Washington within Lendmire’s hard money loan program.
Also in Federal Way: DSCR Loans in Federal Way, WA