Current Longview hard money guidelines, updated from one source.
Every figure below renders from Lendmire’s centralized hard money standards source and refreshes automatically when program guidance changes. Final terms stay specific to the borrower, the property, the documented track record, and the selected lending partner.
Maximum loan-to-cost
Top tier for investors with five or more completed projects; 90% with two or more. First-time investors qualify at lower tiers.
Maximum bridge leverage
Purchase without rehab, measured against both the purchase price and the value. Property that needs time rather than work, refinanced once stabilized.
Maximum cash-out LTV
Cash-out and refinance ceiling against current value. Proceeds depend on the payoff, costs, the exit, and complete underwriting.
Minimum FICO
Additional conditions apply under 660. Underwriting is asset-based; the published floor does not by itself reach the top leverage tier.
Every fix-and-flip tier is separately capped at this share of the after-repair value.
Released in draws against completed, inspected work — not at closing.
Interest-only payments; no prepayment penalty.
Current standard-program snapshot · updated August 28, 2026. Loan amounts up to $5,000,000, larger by exception. Ground-up construction up to 90% of cost for builders with three or more completed projects, to 10 units. Figures are outer bounds, not offers; Lendmire is a mortgage broker, not a lender.
Business-purpose financing available in 40 markets, including Washington, D.C. In Longview, Census estimates put the population near 38,069, the median owner-occupied value around $361.6K, median gross rent near $1,137, and renters in about 44.8% of households — market context for a hard money file, not project underwriting.
What a Longview hard money loan is — and how the approval works.
A hard money loan is short-term, business-purpose financing secured by non-owner-occupied real estate. Instead of qualifying primarily through personal-income calculations, the lender starts with the property, the purchase price, the budget, the after-repair value, and the exit — then weighs the investor’s documented experience.
The asset and the plan lead the analysis
Three questions carry the file: what the property is worth today, what it will be worth after the work, and whether the budget and timeline can close that gap. A stronger answer to each can mean more leverage.
Leverage is tiered by documented experience
Documented completed projects are what move an investor up the leverage tiers; a first project qualifies at a lower tier rather than being turned away. The snapshot above shows where every tier sits today.
Rehab funds in draws, not at closing
The rehab portion pays out as work is finished and inspected, not at the closing table. That is why the budget, the scope, the contractor, and the draw schedule are in the file from the beginning.
The exit is underwritten alongside the loan
A sale or a refinance into long-term financing repays the note, and lenders look for that path before closing. Mapping the refinance early is where a broker who works both products earns the fee.
Total project cost generally means the purchase price plus the rehab or build budget. The experience tier caps loan-to-cost, and a separate cap applies to every tier as a share of the after-repair value. Current ceilings sit in the live program cards above, and the calculator below models your own Longview project. The lender sets the final numbers from the appraisal, the scope of work, and the complete file.
A local market with several distinct project types.
Longview combines established neighborhoods, newer subdivisions, workforce housing, and blocks where older housing stock creates renovation demand. Each project type carries different purchase, rehab, resale, and refinance considerations.
These citywide figures give general market context and are not project-level underwriting. Purchase price, scope of work, after-repair value, exit, and program eligibility are still evaluated on the subject property.
Data source: U.S. Census Bureau QuickFacts — Longview, ACS 5-Year 2020–2024: total population, renter-occupied share of occupied housing units, median value of owner-occupied housing units, and median gross rent.
Distinct Longview submarkets, distinct project considerations.
Hard money lenders in Longview, WA underwrite very different projects across the city — cosmetic flips, full renovations, small multifamily repositions, and new construction. Purchase prices, renovation scope, resale depth, and refinance demand all shape each file.
Condominium and Association Projects
For Longview condominium projects, the association package — documents, budgets, rental rules — becomes part of underwriting next to the scope of work, with a resale as the typical exit.
Infill and Ground-Up Construction
Ground-up construction on Longview infill lots is underwritten on the completed value and the builder’s track record, with the plans, the budget, and the exit reviewed together with the land value.
Older Housing Stock
On Longview’s older blocks, roofs, systems, and structure come with the finishes, so the scope and contingency are read line by line, draws follow inspected work, and renovated comparables set the after-repair value.
The Rental Refinance Exit
In Longview, many investors hold rather than sell: hard money funds the purchase and renovation, the property is leased, and a DSCR refinance repays the note. Arranging both loans in one place keeps the exit planned from the start.
Small Multifamily
Renters make up a large share of Longview households, which supports the value-add small multifamily play: acquire an under-managed two-to-four-unit building on bridge or rehab money, turn the units, and refinance into DSCR financing on the improved rent roll.
Workforce Single-Family
Workforce single-family stock in Longview keeps a first or second project within reach and gives the finished renovation two exits — resale or a rental refinance — which is why the after-repair value is measured against sales on nearby blocks.
Lendmire can also review eligible investment-property projects across the Longview area, core to surrounding towns. Availability remains subject to the property, the program, and the current lending footprint.
What it looks like in this market.
Three composite projects showing how investors actually buy, renovate, and refinance here, each matched to the leverage tier and exit that fits.
Small multifamily, stabilized and refinanced
An investor acquires an under-managed two-to-four-unit building in Longview on bridge money, turns the units and the rent roll, and refinances into DSCR financing on the improved rents — the exit planned with Lendmire before the first draw.
Fit: bridge or rehab · DSCR refinance exit
Infill construction, builder tier
A Longview infill build: land plus construction budget on one loan, leverage set by the builder’s completed projects and capped against the completed value, draws against inspected progress, and a resale or rental-refinance exit.
Fit: construction · completed-value cap
First flip, cosmetic scope
A first Longview project: a dated single-family purchase with a cosmetic budget, one loan for purchase and rehab at the first experience tier, draws released as work is inspected, and a resale to an owner-occupant at the accepted after-repair value.
Fit: purchase plus rehab · first-tier leverage
Four ways Longview investors can use hard money.
Here are the core transaction paths available for eligible Longview investment properties. The right structure depends on the project, the after-repair value, the investor’s experience, credit, reserves, and current lender guidelines.
Fix-and-flip loans
Purchase and rehab budget in one loan, with the rehab funded in draws against completed work. Leverage is set by the investor’s experience tier and capped against the after-repair value.
Bridge purchase loans
Buy a Longview property that needs time rather than work — vacancy, condition, or a seller who will not wait for a conventional file — then refinance into long-term financing once it is stabilized.
Cash-out and refinance
Access equity in a paid-off or lightly leveraged investment property for the next purchase or rehab, within the cash-out ceiling shown above; the sale or refinance that repays the note is reviewed with the loan.
Ground-up construction
Residential new builds up to the unit count shown in the snapshot, with leverage set by the builder’s completed projects and capped against the completed value, and the build budget funded in draws.
Model a Longview project before requesting a quote.
The calculator starts with editable Longview sample assumptions for purchase price, rehab budget, and after-repair value. Leverage tiers refresh from Lendmire’s centralized hard money standards source. Every field remains editable, and the result is a leverage estimate, not a loan offer.
Longview hard money calculator
Enter the purchase price, the rehab or build budget, and the after-repair value you expect the appraisal to support. The output is the estimated maximum loan at the selected experience tier, before closing costs and reserves.
The leverage tiers shown are today’s program ceilings, read from Lendmire’s centralized hard money standards source.
Starting assumptions for Longview are illustrative and come from the citywide median owner-occupied housing value. Edit any field.
This is an illustrative leverage estimate, not a cost quote or a loan offer. The ceilings are outer bounds tiered by documented experience; the actual loan amount, draw schedule, reserves, and eligibility are set by the appraisal, the scope of work, and complete underwriting by the selected lender.
What lenders still review after the leverage math.
Leverage gets the attention, but the loan-to-cost ceiling is only one part of the file. A complete Longview hard money review also takes in the investor’s track record and liquidity, the property’s current and after-repair value, the scope of work, and the exit.
Same investment property, different point in its life.
Short-term, asset-based financing. The purchase, the budget, the after-repair value, and the exit are underwritten; leverage is tiered by documented experience and rehab dollars are released in draws. Built for property that is not yet stabilized.
Long-term and cash-flow-based. When the property is renovated and rented, a DSCR loan qualifies on the rental income relative to the monthly payment, which is the typical take-out for a completed Longview hard money project.
Many Longview projects run on both products — hard money to buy and renovate, then a DSCR refinance on the stabilized rent roll. Since Lendmire arranges both, the exit is planned before the first draw is funded.
What to prepare for a Longview hard money review.
Documentation varies by lender, but these four categories give an investor a practical starting point before requesting a project-specific quote.
This is a general preparation guide, not a universal document checklist. The selected lender may request additional information based on the property, borrower, entity, project, and underwriting findings.
Local details that can change the leverage decision.
Local costs, property characteristics, and project logistics in Longview can change a hard money result or a property’s eligibility materially — review the practical issues below before relying on a target leverage or projected after-repair value.
Use these checks to keep the Longview file clean and fundable.
Because treatment varies by lending partner, the goal here is not to promise a universal outcome but to spotlight the main issues an investor should resolve before closing.
After-repair value support
Leverage is capped against the after-repair value the lender accepts — from an appraisal or valuation and recent comparable sales, never from the investor’s number. An optimistic projection is the most common reason a Longview loan closes smaller than expected.
Scope, budget, and draw inspections
The draw schedule comes from a line-item scope of work with a contingency, a contractor, and a realistic timeline. Because draws release only against completed, inspected work, a thin budget or a missing permit stops the project, not just the file.
Coastal insurance, flood, and wind
On coastal Longview property, wind and flood exposure sit on top of the builder’s-risk or vacant-property coverage the lender requires. Premiums, deductibles, and availability move the carrying-cost budget and can change the rental refinance that repays the note — resolve them before closing.
Entity vesting and title
Business-purpose loans are commonly vested in an LLC or other entity, with personal guarantees from the members. Formation documents, ownership information, and clean title should be ready before closing so the entity never becomes the reason a closing slips.
The exit and the timeline
Because hard money is short-term, the sale or refinance that repays it has to land inside the term. When a Longview property will be held as a rental, mapping the DSCR refinance up front — seasoning, rent support, and leverage — keeps the exit from turning into a scramble at maturity.
From a Longview project to closing.
Begin with the property and the plan, compare the available structures, document the project, and move through underwriting toward closing and the exit.
Run the project
Send the Longview property details, purchase price, budget, after-repair value, experience, credit range, and timing.
Compare partners
Multiple hard money and private money options are compared on leverage, draw mechanics, experience fit, and how flexible the exit is.
Document the project
Assemble the appraisal or valuation, scope of work, contractor, insurance, title, entity, and asset documentation the lender requires.
Close and exit
Settle the structure, fund the purchase, draw against completed work, and complete the sale or the refinance on schedule.
A brokerage built around investor projects.
Longview projects run from a first cosmetic flip to ground-up construction and multi-property portfolios. Those files do not all belong with the same lender.
Partner comparison
Lendmire compares multiple hard money and private money partners rather than forcing every Longview project into one institution’s box.
Investor specialization
The review focuses on leverage, experience tiers, draw mechanics, entity vesting, reserves, property type, and the exit strategy.
The exit, planned early
Because Lendmire also arranges DSCR financing, the refinance that repays the hard money note can be planned before the first draw is funded.
Trusted by buyers & investors alike.
Longview hard money loan FAQs
These answers address the purchase, rehab, construction, entity, leverage, and exit questions Longview investors commonly raise. Final program terms remain project-specific.
Can I use a hard money loan to buy a Longview fix-and-flip property?
Yes — eligible Longview investment properties can be purchased and renovated with a hard money loan through select lending partners. The purchase and the rehab budget close as one loan, the rehab funds in draws against completed work, and leverage is tiered by documented experience and capped against the after-repair value shown in the current snapshot.
How do I compare hard money lenders in Longview, WA?
Weigh the terms that actually move your result — the leverage tier your documented experience qualifies for, how draws are inspected and released, how the after-repair value is set, which property types and Longview neighborhoods the lender will fund, and how the exit is underwritten. Lendmire compares multiple hard money and private money partners on exactly those factors before placing a file.
Do I need experience to get a hard money loan in Longview?
No. First-time investors are eligible; leverage simply steps up with documented completed projects, so a first project starts at a lower tier than a seasoned investor’s. The snapshot shows today’s tiers, and the calculator models a Longview project at yours.
What is the exit on a Longview hard money loan?
Either a sale after the renovation or a refinance into long-term financing — for a rented property, usually a DSCR loan that qualifies on the rental income. Lenders want that path visible before closing, and because Lendmire arranges DSCR financing as well, the Longview refinance can be planned alongside the hard money loan.
Can hard money fund ground-up construction in Longview?
Yes. Eligible ground-up residential builds in Longview are financed up to the unit count in the snapshot, with leverage set by the builder’s completed projects and capped against the completed value. Plans, budget, builder information, and the exit are reviewed with the land value.
Does coastal insurance affect a Longview hard money project?
It does. Wind, flood, and builder’s-risk coverage on a coastal Longview property raise carrying costs and can shape the exit, particularly when the take-out is a rental refinance; lenders expect that insurance picture settled before closing.
What documents does a hard money lender typically ask for?
Identification and credit authorization, entity documents when an LLC takes title, a list of completed projects, the purchase contract or payoff, a line-item scope of work and budget, contractor details, comparable sales behind the after-repair value, insurance, and evidence of the cash to close and reserves.
How long is a hard money loan?
Hard money runs on the short term range shown in the current snapshot, interest-only for the term and without a prepayment penalty on the current program. It is designed to be repaid by the exit, a sale or a refinance, inside that window.
Can I refinance or take cash out of a Longview investment property with hard money?
Yes, up to the cash-out and refinance ceiling in the current snapshot. Investors commonly use a hard money cash-out on a Longview property to fund the next purchase or rehab, and the lender underwrites the exit on that loan just as it would on a purchase.
How are rehab draws funded?
The rehab portion of the loan is held back at closing and released against completed work, usually after an inspection or documented progress. The draw schedule is agreed up front from the scope of work, which is why a line-item budget and a contractor are part of the file from the start.
Bring the Longview project. We will help structure the financing.
Start with a fix-and-flip, bridge purchase, cash-out, or ground-up construction scenario. No credit pull or commitment is required to request an initial review.
This page is Longview-specific — for guidelines and scenarios statewide, visit Hard Money Loans in Washington within Lendmire’s hard money loan program.
Also in Longview: DSCR Loans in Longview, WA