Current Rogers hard money guidelines, updated from one source.
Every figure below renders from Lendmire’s centralized hard money standards source and refreshes automatically when program guidance changes. Final terms stay specific to the borrower, the property, the documented track record, and the selected lending partner.
Maximum loan-to-cost
Top tier for investors with five or more completed projects; 90% with two or more. First-time investors qualify at lower tiers.
Maximum bridge leverage
Purchase without rehab, measured against both the purchase price and the value. Property that needs time rather than work, refinanced once stabilized.
Maximum cash-out LTV
Cash-out and refinance ceiling against current value. Proceeds depend on the payoff, costs, the exit, and complete underwriting.
Minimum FICO
Additional conditions apply under 660. Underwriting is asset-based; the published floor does not by itself reach the top leverage tier.
Every fix-and-flip tier is separately capped at this share of the after-repair value.
Released in draws against completed, inspected work — not at closing.
Interest-only payments; no prepayment penalty.
Current standard-program snapshot · updated August 28, 2026. Loan amounts up to $5,000,000, larger by exception. Ground-up construction up to 90% of cost for builders with three or more completed projects, to 10 units. Figures are outer bounds, not offers; Lendmire is a mortgage broker, not a lender.
Business-purpose financing available in 40 markets, including Washington, D.C. In Rogers, Census estimates put the population near 72,981, the median owner-occupied value around $308.2K, median gross rent near $1,270, and renters in about 42.8% of households — market context for a hard money file, not project underwriting.
What a Rogers hard money loan is — and how the approval works.
A hard money loan is short-term, business-purpose financing secured by non-owner-occupied real estate. The file is read from the asset outward: the property, the purchase price, the budget, the after-repair value, and the exit come first, and the investor’s documented experience is weighed alongside them rather than personal-income calculations.
The asset and the plan lead the analysis
Three questions carry the file: what the property is worth today, what it will be worth after the work, and whether the budget and timeline can close that gap. A stronger answer to each can mean more leverage.
Leverage is tiered by documented experience
Investors with a record of completed projects reach the top leverage tiers. First-time investors start at lower tiers rather than being turned away, and the current snapshot above shows today’s position for each tier.
Rehab funds in draws, not at closing
The rehab portion of the loan funds as work is completed and inspected rather than at closing. Budget, scope, contractor, and draw schedule belong in the file from day one rather than being added later.
The exit is underwritten alongside the loan
A sale or a refinance into long-term financing repays the note, and lenders look for that path before closing. Mapping the refinance early is where a broker who works both products earns the fee.
Total project cost generally means the purchase price plus the rehab or build budget. The experience tier caps loan-to-cost, and a separate cap applies to every tier as a share of the after-repair value. Current ceilings sit in the live program cards above, and the calculator below models your own Rogers project. The lender sets the final numbers from the appraisal, the scope of work, and the complete file.
A local market that supports several distinct project types.
In Rogers, established neighborhoods, newer subdivisions, workforce housing, and blocks with older housing stock each generate renovation demand. Every project type carries its own purchase, rehab, resale, and refinance considerations.
Citywide figures provide general market context, not project-level underwriting. A lender still evaluates the subject property’s purchase price, scope of work, after-repair value, exit, and program eligibility.
Data source: U.S. Census Bureau QuickFacts — Rogers, ACS 5-Year 2020–2024: total population, renter-occupied share of occupied housing units, median value of owner-occupied housing units, and median gross rent.
Distinct Rogers submarkets, distinct project considerations.
Hard money lenders in Rogers, AR see very different projects across the city: cosmetic flips, full renovations, small multifamily repositions, and new construction. Purchase prices, renovation scope, resale depth, and refinance demand all shape how each file is underwritten.
Newer Stock and Light Rehab
Newer Rogers subdivisions call for light rehabs and bridge purchases rather than gut renovations; the file stabilizes quickly and refinances into long-term financing on a schedule set before closing.
Condominium and Association Projects
Where Rogers projects involve condominiums, the association documents, budgets, and rental rules are reviewed with the scope of work before leverage is set; the exit is most often a resale.
Infill and Ground-Up Construction
Ground-up construction on Rogers infill lots is underwritten on the completed value and the builder’s track record, with the plans, the budget, and the exit reviewed together with the land value.
Older Housing Stock
The older blocks of Rogers are where full renovations live: roofs, systems, and structure alongside finishes, with a scope of work and contingency the lender reads line by line before releasing draws. The exit is usually a resale supported by nearby renovated comparables.
The Rental Refinance Exit
Some of the most repeatable Rogers projects never sell: buy on hard money, renovate, lease, and refinance into a DSCR loan on the property’s rent. Because Lendmire arranges both loans, the take-out is underwritten before the first draw.
The Urban Core
Density in Rogers means condominiums, townhomes, and attached stock, so the association package comes into the file next to the scope of work; deep resale supports the exit and disciplines the after-repair value at the same time.
Lendmire can also review eligible investment-property projects across the Rogers area, core to surrounding towns. Availability remains subject to the property, the program, and the current lending footprint.
What it looks like in this market.
Three composite projects that mirror how investors buy, renovate, and refinance in this market — each tied to the leverage tier and exit that fits it.
Small multifamily, stabilized and refinanced
An investor acquires an under-managed two-to-four-unit building in Rogers on bridge money, turns the units and the rent roll, and refinances into DSCR financing on the improved rents — the exit planned with Lendmire before the first draw.
Fit: bridge or rehab · DSCR refinance exit
Infill construction, builder tier
A builder with completed projects takes an infill lot in Rogers to a finished house, with leverage tiered by track record, capped against the completed value, and the build budget released in draws; the exit is a resale or a rental refinance.
Fit: construction · completed-value cap
First flip, cosmetic scope
An investor with no completed projects takes down a tired single-family house in Rogers, funds purchase and rehab in one loan at the first tier, draws as the work passes inspection, and exits by resale at the after-repair value the lender accepted.
Fit: purchase plus rehab · first-tier leverage
Four ways Rogers investors can use hard money.
Here are the core transaction paths available for eligible Rogers investment properties. The right structure depends on the project, the after-repair value, the investor’s experience, credit, reserves, and current lender guidelines.
Fix-and-flip loans
The purchase and the rehab budget close as one loan, with rehab dollars funded in draws against completed work. Leverage follows the investor’s experience tier and is capped against the after-repair value.
Bridge purchase loans
Buy a Rogers property that needs time rather than work — vacancy, condition, or a seller who will not wait for a conventional file — then refinance into long-term financing once it is stabilized.
Cash-out and refinance
Draw equity out of a free-and-clear or low-leverage investment property to fund the next acquisition or renovation, up to the cash-out ceiling in the current snapshot, with the exit underwritten alongside the loan.
Ground-up construction
Residential new builds up to the unit count shown in the snapshot, with leverage set by the builder’s completed projects and capped against the completed value, and the build budget funded in draws.
Model a Rogers project before requesting a quote.
The calculator starts with editable Rogers sample assumptions for purchase price, rehab budget, and after-repair value. Leverage tiers refresh from Lendmire’s centralized hard money standards source. Every field remains editable, and the result is a leverage estimate, not a loan offer.
Rogers hard money calculator
Enter the purchase price, the rehab or build budget, and the after-repair value you expect the appraisal to support. The output is the estimated maximum loan at the selected experience tier, before closing costs and reserves.
The leverage tiers shown are today’s program ceilings, read from Lendmire’s centralized hard money standards source.
Illustrative Rogers starting assumptions are derived from the citywide median owner-occupied housing value. All fields are editable.
An illustrative leverage estimate only — not a cost quote and not a loan offer. Leverage ceilings are outer bounds tiered by documented experience, and the loan amount, draw schedule, reserves, and eligibility that actually apply come from the appraisal, the scope of work, and full underwriting by the selected lender.
What lenders still review after the leverage math.
The loan-to-cost ceiling sits at the center, yet it is only one part of the file. A full Rogers hard money review also looks at the investor’s track record and liquidity, the property’s current and after-repair value, the scope of work, and the exit.
Same investment property, different point in its life.
Short-term and asset-based. The lender underwrites the purchase, the budget, the after-repair value, and the exit, sets leverage by documented experience, and funds the rehab in draws. Designed for property that is not yet stabilized.
Long-term and cash-flow-based. When the property is renovated and rented, a DSCR loan qualifies on the rental income relative to the monthly payment, which is the typical take-out for a completed Rogers hard money project.
Rogers projects often run on both: hard money to buy and renovate, then a DSCR refinance once the rent roll is stabilized. Lendmire arranges both, so the exit is planned before the first draw is funded.
What to prepare for a Rogers hard money review.
Exact documentation varies, but these four categories give an investor a practical starting point before requesting a project-specific quote.
This is a general preparation guide rather than a universal document checklist. The selected lender may request additional information based on the property, borrower, entity, project, and underwriting findings.
Local details that can change the leverage decision.
Local costs, property characteristics, and project logistics in Rogers can change a hard money result or a property’s eligibility materially — review the practical issues below before relying on a target leverage or projected after-repair value.
Use these checks to keep the Rogers file clean and fundable.
Because treatment varies by lending partner, the goal here is not to promise a universal outcome but to spotlight the main issues an investor should resolve before closing.
After-repair value support
Every leverage tier is capped against the after-repair value the lender accepts, which comes from an appraisal or valuation and recent comparable sales, not from the investor’s projection. Optimistic Rogers value assumptions are the most common reason a file lands at a lower loan amount than expected.
Scope, budget, and draw inspections
The draw schedule comes from a line-item scope of work with a contingency, a contractor, and a realistic timeline. Because draws release only against completed, inspected work, a thin budget or a missing permit stops the project, not just the file.
Insurance during the project
An empty or mid-renovation Rogers property is covered by builder’s-risk or vacant-property insurance rather than a standard landlord policy, with the lender named. Price that coverage into the carrying costs before closing.
Entity vesting and title
Business-purpose loans are commonly vested in an LLC or other entity, with personal guarantees from the members. Formation documents, ownership information, and clean title should be ready before closing so the entity never becomes the reason a closing slips.
The exit and the timeline
Because hard money is short-term, the sale or refinance that repays it has to land inside the term. When a Rogers property will be held as a rental, mapping the DSCR refinance up front — seasoning, rent support, and leverage — keeps the exit from turning into a scramble at maturity.
From a Rogers project to closing.
Start with the property and the plan, compare the available structures, document the project, and move through underwriting toward closing and the exit.
Run the project
Share the Rogers property details, purchase price, budget, after-repair value, experience, credit range, and timing.
Compare partners
Multiple hard money and private money options are compared on leverage, draw mechanics, experience fit, and how flexible the exit is.
Document the project
Assemble the appraisal or valuation, scope of work, contractor, insurance, title, entity, and asset documentation the lender requires.
Close and exit
Lock the structure, fund the purchase, draw against completed work, and carry out the sale or the refinance on schedule.
A brokerage built around investor projects.
From a first cosmetic flip to ground-up construction and multi-property portfolios, Rogers projects vary widely — and they do not all belong with the same lender.
Partner comparison
Lendmire compares multiple hard money and private money partners rather than forcing every Rogers project into one institution’s box.
Investor specialization
The review centers on leverage, experience tiers, draw mechanics, entity vesting, reserves, property type, and the exit that repays the note.
The exit, planned early
Since Lendmire also arranges DSCR financing, the refinance that repays the hard money note can be planned before the first draw is funded.
Trusted by buyers & investors alike.
Rogers hard money loan FAQs
These answers address the purchase, rehab, construction, entity, leverage, and exit questions Rogers investors commonly raise. Final program terms remain project-specific.
Can I use a hard money loan to buy a Rogers fix-and-flip property?
Yes. Eligible Rogers investment properties can be bought and renovated on a hard money loan through select lending partners: one loan for the purchase and the rehab budget, rehab funded in draws against completed work, and leverage tiered by documented experience and capped against the after-repair value in the current snapshot.
How do I compare hard money lenders in Rogers, AR?
Focus on what changes your result: the leverage tier your track record qualifies for, how rehab draws are inspected and released, how the after-repair value is set, which property types and Rogers markets are accepted, and how the exit is treated. Lendmire weighs multiple hard money and private money partners on those factors before placing a file.
What is the exit on a Rogers hard money loan?
Either a sale after the renovation or a refinance into long-term financing — for a rented property, usually a DSCR loan that qualifies on the rental income. Lenders want that path visible before closing, and because Lendmire arranges DSCR financing as well, the Rogers refinance can be planned alongside the hard money loan.
Do I need experience to get a hard money loan in Rogers?
No. First-time investors are eligible; leverage simply steps up with documented completed projects, so a first project starts at a lower tier than a seasoned investor’s. The snapshot shows today’s tiers, and the calculator models a Rogers project at yours.
Can hard money fund ground-up construction in Rogers?
Yes. Eligible ground-up residential builds in Rogers are financed up to the unit count in the snapshot, with leverage set by the builder’s completed projects and capped against the completed value. Plans, budget, builder information, and the exit are reviewed with the land value.
What documents does a hard money lender typically ask for?
Expect identification and credit authorization, entity documents for an LLC, a record of completed projects, the purchase contract or payoff, a line-item scope of work and budget, contractor information, comparable sales behind the after-repair value, proof of the cash to close, and insurance and title information. The lender may request more based on the project.
Can I refinance or take cash out of a Rogers investment property with hard money?
Yes, up to the cash-out and refinance ceiling in the current snapshot. Investors commonly use a hard money cash-out on a Rogers property to fund the next purchase or rehab, and the lender underwrites the exit on that loan just as it would on a purchase.
Can I close a Rogers hard money loan in an LLC?
Yes — business-purpose hard money loans are commonly vested in an LLC, corporation, or partnership, and individual investors are eligible as well. Formation documents, ownership information, and personal guarantees are typically part of the file, and the closing team confirms the Rogers title and entity requirements.
Does the after-repair value come from my estimate?
No — the lender sets the after-repair value from an appraisal or valuation and recent comparable sales, not from the investor’s projection. Build your own estimate the same way, because every leverage tier is capped against the value the lender accepts.
What should I submit for a Rogers hard money quote?
The property address or market, the project type, the purchase price or payoff, the rehab or build budget, the expected after-repair value, your completed projects, the entity that will take title, your credit range, and the timeline. A loan officer then identifies what else the Rogers file needs.
Bring the Rogers project. We will help structure the financing.
Begin with a fix-and-flip, bridge purchase, cash-out, or ground-up construction scenario. No credit pull or commitment is required to request an initial review.
This page is Rogers-specific — for guidelines and scenarios statewide, visit Hard Money Loans in Arkansas within Lendmire’s hard money loan program.
Also in Rogers: DSCR Loans in Rogers, AR