Current asset-based guidelines, updated from one source.
The block below is the asset-based program reduced to the figures that decide a file, read from Lendmire’s single guideline source and refreshed on this page when the wholesale sheets change: the loan ceiling on each path, the credit floor, the leverage by purpose and occupancy, and the share of each account type that counts. Everything else on the page is explanation.
Up to $4,000,000 on assets alone; $3,500,000 when assets become income
Up to $4,000,000 on assets alone, and up to $3,500,000 when assets are read as income: the two paths carry different ceilings because they prove ability to repay in different ways. A loan officer confirms which path the file fits before the amount is settled.
The asset qualifier path’s published floor; the depletion path follows the suite’s score and amount matrix
The asset qualifier path publishes a 600 decision-score floor. The asset depletion path follows the score and loan-amount matrix of the documentation suite it belongs to, where the floor rises with the leverage and the amount. The score is read from the credit report at application; it is never promised here.
That ceiling on a purchase and 75% on a refinance when assets cover the loan; 60% on a depletion cash-out
The leverage ceilings are 80% for a purchase and 75% for a refinance on the asset qualifier path, and 80% for a purchase or rate-and-term refinance and 60% for a cash-out on the asset depletion path, both on a principal residence or second home. The leverage table shows the investment-property row.
Credited under 59½, and at 59½ or older, when assets cover the loan; 70% at any age when assets become income
A 401(k) or IRA is credited at 90% of its balance for an owner under 59½ and 100% for an owner at 59½ or older on the asset qualifier path; the asset depletion path counts a flat 70% of the balance. Brokerage, savings, money market, and certificates of deposit count in full when the assets cover the loan.
| Account type | Credit toward the loan |
|---|---|
| Brokerage accounts (stocks, bonds, funds) | 100% of the balance |
| Certificates of deposit | 100% of the balance |
| Money market accounts | 100% of the balance |
| Savings and checking | 100% of the balance |
| Retirement accounts (401(k), IRA) — owner under 59½ | 90% of the balance |
| Retirement accounts (401(k), IRA) — owner 59½ or older | 100% of the balance |
| Account type | Share counted |
|---|---|
| Cash accounts | 100% of the balance |
| Certificates of deposit | 100% of the balance |
| Securities (stocks, bonds, funds) | 80% of the balance |
| Private stock | 75% of the balance |
| Retirement accounts (any age) | 70% of the balance |
| Real-estate equity | 60% of the balance |
| Path and occupancy | Purchase | Rate-and-term | Cash-out |
|---|---|---|---|
| Asset qualifier — primary residence or second home | 80% | 75% | set by the lender |
| Asset depletion — primary residence | 80% | 80% | 60% |
| Asset depletion — second home | 80% | 80% | 60% |
| Asset depletion — investment property | 65% | 65% | 60% |
Two paths behind these pages: on the asset qualifier path the usable assets must equal or exceed the whole loan and no employment or income is documented; on the asset depletion path the usable assets are divided across the published number of months (the table above) into a qualifying income that carries the housing payment and other debts through the debt-to-income test. Reserves are not required on the qualifier path at or below the refinance leverage; the depletion path asks for statements at least one hundred twenty days old plus a current one. Minimum assets on the depletion path: the lesser of one million dollars or one and a quarter times the loan, never below a quarter million liquid when assets are the only income. Lendmire is a broker, not the lender, and the lender is not named.
Current asset-based snapshot · updated October 21, 2026 · a Lendmire loan officer confirms the path, the asset credit, and the leverage for the file before an offer.
This page describes program parameters, not an offer. The amounts, the credit floor, the leverage, the credit shares, the haircuts, and the seasoning are wholesale guidelines, subject to change without notice and to full underwriting; the statements, the credit report, and the appraisal decide every file. The calculator is illustrative and the lender’s own calculation governs. Lendmire is a mortgage broker, not a lender, licensed for consumer mortgages in sixteen states. NMLS #2371349.
What an asset-based mortgage is — and how the two paths qualify a file.
The asset-based program is one program with two doors. Through the first, a Burbank buyer walks in with statements that add up to the loan and leaves employment and income out of the file entirely. Through the second, a buyer whose balances do not cover the loan walks in with the same statements and the lender turns them into a monthly figure to test against the payment. The cards below describe each door and the rules at the threshold.
For the program overview, see Lendmire’s asset-based mortgage program, or the statewide guide at Asset-Based Mortgage in California; for the age rule on retirement withdrawals, see the IRS.
Two paths, one program
Think of the two paths as two thresholds. On the asset qualifier path the threshold is the loan amount itself: the credited balances must reach it. On the asset depletion path the threshold is a ratio: the credited balances, divided into monthly income, must carry the housing payment and the other debts. A Burbank file with a large balance sheet usually clears the first; a file with a moderate one is often written on the second.
The asset qualifier path
Two months of statements for each qualifying account document the path, and the balances are read as they stand after the credit percentages. The credit floor is published; the leverage is published; the largest loan is published. What the lender settles file by file is which accounts are eligible and how the age rule applies to each retirement account, and a Burbank loan officer settles that before an offer is written.
The asset depletion path
On this path the eligible balances are reduced by account type, the total is spread over the divisor, and the monthly figure is read as income against the housing payment and other debts. Seasoning is longer here than on the asset qualifier path: statements at least four months old at application plus a current one, unless the money came from the sale of a business, an inheritance, or a legal settlement. A Burbank loan officer sorts the eligible accounts from the ineligible ones at the start.
Seasoning, statements, and what counts
Seasoning is the proof that the assets are the borrower’s to keep: two months of statements on the asset qualifier path, older statements plus the current one on the asset depletion path. Large recent deposits inside that window are read, not ignored: a transfer between the borrower’s own accounts is documented as such, a sale of property or a business with its paperwork, and a gift under the lender’s gift rules. A Burbank file that shows the trail cleanly meets fewer questions in underwriting.
The calculator runs a Burbank balance sheet through both paths at once. It credits cash, brokerage, and retirement balances at their shares, flips the retirement credit when the owner is past the age line, measures the total against the loan, and divides the haircut total into a monthly income beside the estimated payment. The arithmetic is illustrative; the lender’s own calculation governs.
Burbank’s market in figures — and how asset-based lending fits.
The U.S. Census Bureau figures below set the scale of the Burbank market the program lends into. Values set the loan size the assets must cover or carry; ownership sets how many households are candidates; the population sets the depth of the market the appraiser draws comparable sales from.
Citywide figures provide general market context, not an appraisal or an income calculation. These are context figures, not underwriting inputs. A typical value sets the scale of the loan, the ownership share says how many households are likely to be buyers rather than renters, and the owner count says how wide the comparable pool is when the appraisal is written.
Data sources: U.S. Census Bureau — ACS 5-Year (2024) housing and population estimates, including tenure, home values, gross rents, and household income.
Distinct Burbank neighborhoods, distinct asset files.
Each card below is a Burbank submarket seen through the program: who buys there on assets, which path usually fits, and what the loan officer checks first. The figures in the snapshot apply everywhere; the emphasis changes from one card to the next.
Two-to-four-unit homes
Small multi-unit buildings in Burbank attract the asset-rich buyer who wants rental income beside the portfolio. Financed as an investment, the file is a depletion file: haircut assets divided into income, the investment leverage row, and a stronger score for a first-time investor. About 57% of Burbank’s households rent — roughly 24,397 renter households on the latest Census estimate.
Newer luxury infill and new construction
New luxury construction in Burbank appraises cleanly, so the file is about the amount: a loan near the top of the program needs usable assets to match on the asset qualifier path, or a depletion income large enough to carry the payment. The calculator on this page shows both readings for a price in that range. The median owner-occupied home value in Burbank runs near $1,089,100 on the latest Census estimate.
High-rise and luxury condominiums
Burbank’s high-rise and luxury condominiums draw the buyers the program is built for: a household downsizing from a house it owns outright, with the proceeds in a brokerage account and no salary to show. The unit is a principal residence or a second home on either path, the dues enter the depletion ratio, and the lender’s project review runs alongside the asset review. Median household income in Burbank sits near $97,082 on the latest Census estimate.
Second homes and pied-à-terre purchases
Second homes are the program’s natural fit in Burbank: a portfolio, a residence elsewhere, and a city unit bought on the balances. The occupancy is confirmed with the borrower’s intent and the property’s use, and the second-home row of the leverage table applies. Roughly 18,598 Burbank households own their homes on the latest Census estimate — 43% of all households, the pool an asset-based purchase joins.
Estate properties
Burbank’s estate properties are where the program’s largest loans are written, and where the asset qualifier path is most often the fit: a balance sheet that covers a loan at the top of the program with no income in the file. The appraisal on an estate is usually the slowest and hardest part of the file; the assets are usually the easy part. Burbank is home to about 105K people and sits within the Los Angeles-Long Beach-Anaheim, CA area.
Close-in architect-designed homes
Value drives the leverage on a one-of-a-kind Burbank home; the accounts drive the rest. A loan officer runs the file at the contract price and at a lower appraised value so the buyer knows the margin on both before the offer. A margin above the loan is the usual protection. On a home in Burbank priced at or above the median, the asset qualifier path finances up to 80% of the price on a purchase — the balance of the price is the down payment, and the usable assets must cover the loan itself.
Across these Burbank submarkets the program is identical; what varies is the price the assets must cover or carry and the occupancy the buyer intends. A loan officer confirms the path, the credit, and the leverage for the specific file before an offer is written.
Four ways Burbank buyers put their assets to work.
The uses below are the ones Burbank loan officers see most: the retiree buying on a portfolio, the seller of a business buying before the next venture, the household keeping the investments invested, the second home bought on assets. Each is a different file on the same two paths.
Finance a second home or a rental on assets
For a rental, the asset depletion path is the only path open, at the investment-property leverage, with cash-out at the depletion path’s cash-out ceiling. For a second home, both paths are open. A Burbank loan officer sorts the occupancy first, because it decides the path before the balances are even read.
Buy a home on assets alone, with no income in the file
When the balance sheet covers the loan, a Burbank household keeps the income question out of the file entirely. The lender credits the accounts, confirms the total against the loan, checks the leverage for a purchase, and reads the credit report; reserves are not required at or below the refinance leverage, and the path reaches well into the jumbo range.
Buy after a liquidity event, before the next venture
The seller of a Burbank business, the founder after an exit, the household after an inheritance: the money is new, large, and often unaccompanied by income. The asset qualifier path reads it once the two months of statements exist; the depletion path excuses the usual seasoning for sale-of-business, inheritance, and legal-settlement funds.
Refinance a home the assets already stand behind
The refinance is the retiree’s use: the income that qualified the original loan has stopped, the portfolio has not, and the asset qualifier path reads the portfolio. A Burbank file needs usable assets equal to the new loan, a loan inside the refinance leverage, and two months of statements per account.
Measure a Burbank loan against the assets before requesting a review.
This is an asset coverage estimate, not an approval: it credits each account type the way the program does, switches the retirement credit at the age line, measures the total against the loan, applies the depletion haircuts and the divisor, and estimates the payment at the Freddie Mac benchmark. A Burbank loan officer runs the lender’s own version before anything is written.
Burbank asset coverage estimate
Illustrative Burbank figures, all editable: the price, the loan, three account buckets, the age switch for the retirement credit, the benchmark, taxes, insurance, and other monthly debts for the ratio.
Editable benchmark: 7.40% as of October 15, 2026 · Freddie Mac 30-year average via FRED®. A conventional market reference, not an asset-based mortgage quote.
Illustrative starting assumptions: a $1,525,000 price above the Burbank median, a loan at seventy percent of the price, a balance sheet split among cash, brokerage, and retirement accounts with the owner under 59½, a thirty-year payment at the current Freddie Mac conforming benchmark, property taxes and insurance estimated for California (U.S. Census Bureau). Every field is editable.
Illustrative estimate only — not a Loan Estimate, approval, quote, or commitment to lend. The credit percentages, the haircuts, and the divisor are wholesale program parameters hydrated from Lendmire’s guideline endpoint; the lender’s own calculation governs, and which accounts count, how they season, and what the age rule allows are settled in underwriting. The rate field carries the weekly Freddie Mac thirty-year conforming benchmark, a market reference and not an asset-based mortgage quote; the terms on an asset-based mortgage are set by the lender at lock. Taxes and insurance are estimates. Nothing here is tax or investment advice.
Same buyer, three ways to document the file.
The same Burbank household can often be written three ways. The asset qualifier path asks the assets to cover the whole loan and needs the least paperwork. The asset depletion path does not need the balances to cover the loan and brings the ratio test back. The bank statement loan ignores the balances and reads the deposits instead. Which one fits depends on where the money shows up.
Assets that cover the loan, assets as income, or deposits as income.
Usable assets equal to the whole loan, no employment or income documented, principal residences and second homes, purchase and refinance at the path’s leverage, two months of statements, reserves not required at or below the refinance leverage. The path with the fewest questions, and the one that asks the assets to cover the whole loan.
The path for the household whose savings are real but smaller than the loan. It can carry a loan the balances would not cover outright, widens the occupancies to include rentals, and adds a cash-out ceiling; in exchange it brings the ratio back and counts retirement money at a flat haircut.
A different question entirely: not what the household owns but what the business brings in. The bank statement loan suits the Burbank owner with strong deposits and modest savings, where the asset-based paths suit the household with strong savings and modest deposits. See Lendmire’s bank statement loan program.
Assets that cover the loan, assets that become income, deposits that become income: three answers to one question, and the right one for a Burbank household is read off its statements. The comparison on this page is run for real on every file before the lender’s terms are put in writing. Loans above the conforming limit on documented income: Lendmire’s jumbo loan program.
What to prepare for a Burbank scenario review.
Preparation for a Burbank asset-based review is mostly gathering: the statements for each account, the age of the owner of each retirement account, the credit report, and, on the depletion path, any income the asset income will supplement. The items below are the ones a loan officer asks for first.
This is a general preparation guide, not a universal checklist. The selected lender may request additional information based on the transaction, the property, the path, the accounts, and the credit picture. Nothing here is legal, tax, or investment advice.
Local details that can change the loan.
Here are five details, chosen for the Burbank file, that most often reshape an asset-based loan. The first two apply to nearly every file; the rest depend on the accounts, the occupancy, and the purpose.
Use these checks to keep the Burbank file clean and fundable.
The checklist for a Burbank asset-based file starts with the accounts: the age of each retirement owner, the months of statements, the eligibility of each account type. The path and the leverage follow from the answers.
- Confirm the age rule: the depletion path haircuts retirement balances at a flat share regardless of age.
- Count the months: a sale of a business, an inheritance, or a settlement is excused from the depletion wait.
- Decide standalone or supplemented: the loan officer runs standalone and supplemented versions where earnings exist.
Retirement accounts and the age line
The age line is applied per owner and per account. A Burbank couple where one spouse is past 59½ and the other is not sees each account credited by its own owner’s age, and the sum is what counts against the loan. The accounts stay where they are; the age rule governs the credit, not the custody. The birthday is checked against the date of the application.
Seasoning by path
Seasoning is the detail that most often sets the calendar for a Burbank asset-based purchase. The asset qualifier path is the shorter wait; the depletion path is longer except where the funds came from the sale of a business, an inheritance, or a legal settlement. A loan officer reads the statements against the path’s clock before the contract is signed.
Supplementing income with asset income
Supplementing changes the arithmetic without changing the accounts: the same haircut total, the same divisor, the same monthly figure, added to a documented income instead of standing alone. A Burbank retiree with Social Security and a portfolio is the typical supplemented file, and the combined ratio is read within forty-five percent.
Reserves by path
On the asset qualifier path reserves are not required at or below the refinance leverage; above it the lender sets the requirement. On the depletion path the program lists no reserve months for the path itself, though the assets that produce the income are, by nature, in reserve. A Burbank loan officer confirms what, if anything, must be held after closing.
The minimum-assets rule on the depletion path
The minimum is measured on qualified assets after the haircuts, so a Burbank balance sheet heavy in securities or retirement money counts for less than its face value and can fall short of the minimum. The loan officer checks the minimum first and the ratio second. A file that misses the minimum is often rewritten as a supplemented file when any documented income exists.
From a Burbank asset review to keys in hand.
Four steps carry a Burbank asset-based loan from review to closing. Nothing on this page commits anyone to lend; the written terms come from a licensed loan officer after the review, and the appraisal and the underwriting decide the rest.
Asset review
The first conversation settles the shape of a Burbank file: which path the balances support, what leverage the purpose allows, how long the accounts have seasoned, and whether the usable total clears the loan with a margin. The review names the path, and the loan officer writes the outcome down before any offer is drafted.
Contract and appraisal
A Burbank buyer on assets competes like any financed buyer: the contract, the appraisal contingency, and the timeline are the usual ones. What differs is that no employment verification sits in the path on the asset qualifier side, so the file is often quieter than an income file at this stage.
Underwriting
Conditions, when they come, are usually documentary: a missing statement page, a deposit without its source, an account that needs its holdings shown. A Burbank buyer who gathered the list on this page meets most of them before they are asked. The underwriter’s questions are the loan officer’s questions asked a second time, on the same statements.
Closing
Closing on an asset-based loan looks like any other closing from the outside. From the inside, the difference is what did not happen along the way: no employment call, no tax transcript, no income calculation on the asset qualifier path. A Burbank loan officer attends to the funds to close so the usable total is intact.
A brokerage that reads both paths.
The program behind these pages is placed with select lenders in Lendmire’s wholesale network, and Lendmire is never the lender. What the brokerage adds is the comparison: the asset qualifier path against the depletion path against a bank statement loan on the same Burbank statements, and written terms for the one that fits.
Both paths, one set of statements
The comparison printed on this page is run for real on every Burbank file: assets that cover the loan beside assets that become income beside deposits read as income, and the written terms follow from it. The buyer sees the usable total on each path, the margin above the loan, and the derived income beside the payment before anything is signed.
The account rules explained before the offer
Reading the statements early is the whole method. A Burbank loan officer sorts the accounts, confirms the owners’ ages against the age line, counts the months, and names the usable total on each path, in writing, before an offer is drafted. The aim is a file with as little as possible left to be discovered in underwriting.
Licensed, consumer-purpose, in writing
Every figure on this page is a program parameter drawn from one guideline source. The written terms for a Burbank file come from a licensed loan officer after the review, the credit report, and the appraisal; the page is where the method is explained, not where the loan is made.
Trusted by buyers & families alike.
Burbank asset-based mortgage FAQs
The questions below are the ones a Burbank loan officer hears first from a buyer who has assets and no income on paper. The answers describe the program’s rules in words; the figures live in the snapshot above.
What is an asset-based mortgage?
Think of it as the mortgage for the buyer who could pay cash but would rather not. The accounts stay invested, the lender reads them on paper, and the loan is sized to what the usable assets cover or to the income they produce. For a Burbank household with wealth and little income on paper, it is often the mortgage that fits.
How does the asset qualifier path work?
The lender adds up the eligible accounts, credits each at its share, and compares the total with the loan. If the total equals or exceeds the loan, the Burbank file is read on assets alone: no employment verification, no tax returns, no income calculation. The leverage is a share of the price on a purchase and a lower share of the value on a refinance.
How does the asset depletion path work?
The lender haircuts each eligible account by type, adds up what remains, and divides the total by a fixed number of months to produce a monthly qualifying income. That income is then run through the debt-to-income test with the new payment and other debts. A Burbank buyer whose assets are meaningful but short of the loan is written this way.
How are 401(k) and IRA balances counted, and why does 59½ matter?
Retirement money counts on both paths, and it counts most generously on the asset qualifier path for an owner past the age line. For a Burbank file built mostly on retirement balances, the owner’s birthday can decide whether the assets cover the loan, and a loan officer checks the date first.
What credit score does an asset-based mortgage need?
Assets do not replace credit. A Burbank borrower needs the score at or above the floor for the path; the depletion path also reads the housing history, tolerates one late housing payment in the past year at a cost, and does not accept repeated bankruptcies. The score is read from the report at application.
How long do the assets need to be in the accounts?
Two months of statements on the asset qualifier path; a statement at least four months old plus a current one on the depletion path. The purpose of seasoning is to show that the assets are the borrower’s to keep and not a loan dressed as a balance. A Burbank buyer who leaves the accounts as they are and documents the history that already exists has the easiest file; moving money before applying creates a trail that has to be reconstructed.
How large can the loan be?
The asset qualifier path reaches the larger ceiling, shown in the snapshot, provided the usable assets cover the loan; the asset depletion path runs between its own minimum and maximum, also shown. Both figures are program parameters, subject to the lender’s guidelines at lock.
Are reserves required?
The program is light on reserves because the qualifying assets are the reserves. The practical question for a Burbank buyer is whether the down payment and closing costs are drawn from the same accounts that cover the loan, since the lender reads the balances after those draws.
What sets the timeline on an asset-based mortgage?
The timeline is set by the appraisal, the title work, and the documentation of the accounts, not by the program. A Burbank file whose statements are complete and whose deposits are documented moves on the ordinary purchase calendar; one with unexplained deposits or missing pages waits for them.
How much can I borrow against the price or the value?
Leverage and the asset threshold work together on the asset qualifier path: lowering the loan with a larger down payment lowers the usable total needed to cover it. The calculator shows the largest loan the assets would cover inside the ceiling for the purpose chosen.
Cover the loan or convert the assets in Burbank: compared on your statements.
Share the balance sheet once; the review covers the asset qualifier path, the asset depletion path, and the alternatives on the same statements. The terms come in writing from a licensed loan officer.
This guide covers Burbank — for the statewide guidelines, markets, and scenarios, see Asset-Based Mortgage in California, part of Lendmire’s asset-based mortgage program.
Nearby markets in California: Glendale · Pasadena · Los Angeles · Alhambra · Monterey Park · Santa Monica · Huntington Park · Inglewood
Related programs: Bank Statement Loans · Jumbo Loans · Super Jumbo Bank Statement Loans