Current super-jumbo bank-statement guidelines, updated from one source.
Every super jumbo bank statement page in this series shows the same live program figures, read from one guideline source rather than typed into each page.
Program ceiling
The ceiling is the top of the ladder, not a promise at every occupancy or credit tier — leverage and credit floors change band by band, and the largest bands belong to the bank program.
Top primary-residence leverage
At the first rung of the ladder a primary residence reaches this ceiling; second homes and investment property carry their own ceilings, and every band above steps down.
Months of bank statements
Twelve or twenty-four months of statements qualify the file; the expense ratio depends on whether the account is personal or business and on the size of the business.
Credit floor
The minimum credit score for the ladder’s bottom rung; the credit required for a given leverage rises with the loan size and with the occupancy.
Qualifying income is the eligible deposits divided by the statement months, after the ownership share and any expense ratio; total obligations stay inside this cap.
Cash in hand is capped at this figure when the loan is above sixty percent of value; at or below that leverage the proceeds are not capped on the portfolio program.
An interest-only period is available through select programs at its own leverage and credit floor; the bank portfolio program carries a lower interest-only cap.
| Loan size | Primary residence | Second home | Investment |
|---|---|---|---|
| $300,000 – $1M | 90% · 680+ | 85% · 700+ | 85% · 700+ |
| $1M – $1.5M | 85% · 700+ | 80% · 680+ | 80% · 680+ |
| $1.5M – $2M | 85% · 720+ | 80% · 700+ | 80% · 700+ |
| $2M – $2.5M | 80% · 720+ | 80% · 720+ | 80% · 720+ |
| $2.5M – $3M | 80% · 720+ | 75% · 720+ | 75% · 720+ |
| $3M – $3.5M | 75% · 720+ | 65% · 760+ | 60% · 680+ · bank program |
| $3.5M – $4M | 75% · 760+ | 65% · 760+ | 60% · 680+ · bank program |
| $4M – $5M | 65% · 680+ · bank program | 65% · 760+ · case by case | 65% · 760+ · case by case |
| $5M – $6M | 60% · 680+ · bank program | 55% · 680+ · bank program | 55% · 680+ · bank program |
| $6M – $10M | 60% · 680+ · bank program | 55% · 680+ · bank program | 55% · 680+ · bank program |
| $10M – $20M | 55% · 680+ · bank program | 50% · 680+ · bank program | 50% · 680+ · bank program |
| $20M – $30M | 55% · 680+ · bank program | 50% · 680+ · bank program | 50% · 680+ · bank program |
Current super-jumbo bank-statement snapshot · updated September 7, 2026 · portfolio program to $6M, bank portfolio program above it to the ceiling · super-jumbo overlays above $3.5M on a primary residence and $3M on a second home or investment property · portfolio-program balances above $4M reviewed case by case before submission · reserves 3–9 months by loan size.
This page describes a consumer mortgage program at the program level. The leverage cell for any file comes from the current matrix for its occupancy, loan size and credit tier; the statements, the appraisal, reserves, and full underwriting decide the actual terms, subject to lender program eligibility. Nothing here is a rate, a quote, a fee, or a commitment to lend, and Lendmire is never the lender.
What a super-jumbo bank-statement loan is — and how deposits become income.
For Billings, MT borrowers, the program is best understood as a table rather than a number: each occupancy has its own ladder, each loan-size band has its own leverage and credit cells, and two programs share the work.
Balance inside the standard ceiling? See Bank Statement Loans in Montana, the standard program, or the statewide guide at Super Jumbo Bank Statement Loans in Montana.
Deposits qualify the loan, not tax returns
The income that matters is what Billings business owners actually deposit — personal statements with business transfers at full value, business statements after an expense ratio set by the business type or by an accountant’s letter.
Leverage is a ladder by occupancy and size
There is no single loan-to-value on this program. A Billings file is placed by occupancy and loan size, the credit tier selects a cell inside the band, and that cell is the leverage. The ladder table on this page shows the best cell in each band for each occupancy.
Credit, reserves and overlays rise with the balance
In Billings, MT, the overlays above the line are the program’s way of translating size into credit: a higher floor, a spotless housing history, longer seasoning after any credit event, and reserves that scale with the payment.
Two programs, one file
For Billings, MT borrowers planning a very large balance, the program that carries it is decided by the ladder: the portfolio program through its bands — case by case above its review line — and the bank portfolio program above them. Either way, the deposits qualify the file.
This is the whole test, applied at the leverage the ladder allows for the occupancy and balance. The tool below reads the matrix for your inputs; underwriting decides the real numbers.
Where Billings’ self-employed high earners buy — and how a lender reads the market.
The stock of high-value homes in Billings, MT, the share of households at the top of the income distribution, and the share of workers who work for themselves together sketch the market a high-balance bank-statement file is underwritten in.
Citywide figures provide general market context, not an appraisal or an income calculation. Value and income rarely climb at the same pace; the market figures below show how far Billings’ top of market has moved, and the calculator shows what that means for the debt-to-income math.
Data sources: U.S. Census Bureau — ACS 5-Year (2024) housing and population estimates, including owner-occupied home values by bracket, household income by bracket, and class of worker.
Distinct Billings submarkets, distinct appraisal stories.
A super jumbo bank statement file in Billings reads differently by submarket — appraisal depth, association packages, acreage, and property type all shift from one to the next.
High-rise and full-service residences
High-rise units in Billings can carry very large balances, and the association package — reserves, rental rules, hotel-style operations — is underwritten as carefully as the statements. Billings counts a population near 119K within the Billings, MT area.
Historic and estate districts
The historic estates of Billings carry values that rest on condition and provenance, and the appraisal will weigh both, together with the scarcity of true comparables. Median household income in Billings sits near $73,712, the middle of a distribution whose top end the program serves.
Executive suburbs and enclaves
The relocation market around Billings keeps values well supported on high-value homes, and a file built on solid deposits reads cleanly against the ladder. Census estimates place about 1.4% of Billings’ owner-occupied homes at a value of one million dollars or more — roughly 457 homes.
Prestige neighborhoods
The blue-chip streets of Billings carry the values and the sales record that make a large balance straightforward to underwrite once the statements are in order. Roughly 6,743 Billings workers — about 11% of the workforce — work for themselves, the borrowers bank-statement programs exist for.
Luxury townhomes and two-to-four-unit homes
In Billings, a high-value townhome or a small multi-unit home the borrower occupies qualifies on statements like any other, and the property type selects its own cell on the matrix. The median owner-occupied home value in Billings runs near $343,400 on the latest Census estimate.
New luxury construction
Newly built luxury homes in Billings carry the value but not always the comparables; valuation support is settled first, leverage second. About 9.4% of Billings’ households earn two hundred thousand dollars a year or more — roughly 4,796 households at the top of the income distribution.
These are patterns, not promises: each Billings home is underwritten on its own appraisal, its own deposits, and its own place on the ladder.
Four ways Billings entrepreneurs put super-jumbo bank-statement financing to work.
The same deposit-qualified structure serves several purposes at high balances in Billings, MT; four of the most common are below.
Finance a second home on the same statements
Second-home financing in Billings, MT reads the same statements and the same cap; the ladder starts a rung lower than a primary residence and never rises above it, band by band.
Move with a departing residence
A relocating Billings, MT borrower who is selling one home while buying the next can be carried by the program that treats the departing residence as part of the file.
Take cash out inside the cash-out ladder
A Billings home with equity can return cash on a deposit-qualified refinance; the cash-out ladder steps leverage down by band, and proceeds are capped above a set leverage on the portfolio program.
Buy a primary residence above the standard ceiling
Acquire a Billings estate or tower residence as a primary home and qualify on deposits, with the highest leverage the ladder offers at the balance and interest-only available through select programs.
Size a Billings bank-statement file before requesting a quote.
Run a Billings scenario through the matrix before you request a quote: the statements and deposits produce qualifying income, the occupancy and balance produce the leverage cell, and the cap produces the budget. No rate, payment, or cost appears anywhere in the result.
Billings bank-statement qualifier
Seeded with Billings’ market figures; every field is editable, and the leverage cell updates as occupancy, balance and credit tier change.
Illustrative starting assumptions: a $1,250,000 price set above Billings’ median owner-occupied home value to reach the super jumbo band, an equity position sized to the ladder, twelve months of deposits sized to carry a balance of that size, and modest other obligations (U.S. Census Bureau). Every field is editable; no rate or payment is shown.
Illustrative estimate only — not a Loan Estimate, approval, quote, or commitment to lend. No rate, payment, or cost is shown or implied. Qualifying income follows the program’s deposit method for the statements entered; leverage is read from the current program matrix for the occupancy, loan size and credit tier; the appraisal, the statements themselves, reserves, and full underwriting decide the actual figures. Consumer mortgage lending licensed in sixteen states.
Same borrower, four very different files.
The right structure for a Billings, MT borrower depends on the balance, the occupancy, and whether the deposits, the assets, or the property’s rent should carry the file.
Deposits at scale, a standard bank-statement loan, or the property’s rent.
Qualifies on twelve or twenty-four months of deposits above the standard bank-statement ceiling, with leverage read from an occupancy-and-size matrix, super-jumbo overlays above the line, and a bank portfolio program carrying the largest bands.
For a Billings, MT home inside the standard ceiling, the standard bank-statement program is usually the simpler file; the super jumbo ladder is for the balance above it. Inside the standard ceiling, Lendmire arranges bank statement loans in Montana.
Qualifies an investment property on its rent rather than the owner on deposits — business-purpose financing with its own ladder, for a leased rental rather than a home the borrower will live in. For a leased rental, see super jumbo DSCR loans in Billings.
If the deposits carry the payment and the balance is above the standard ceiling, super jumbo bank statement is the structure; if it is inside the ceiling, standard bank statement; if the property is a leased rental, super jumbo DSCR.
What to prepare for a Billings scenario review.
A typical starting file for a high-value home.
This is a general preparation guide, not a universal checklist. The selected lender may request additional information based on the loan size, occupancy, the statements, the business, the property, and reserves. Nothing here is legal or tax advice.
Local details that can change the loan.
A super jumbo bank statement file in Billings, MT is won or lost on details a standard file rarely meets: the occupancy ladder, the statement method, the overlays above the line, the program hand-off, the property type.
Use these checks to keep the Billings file clean and fundable.
Before requesting a quote on a Billings, MT home, confirm the occupancy ladder, the expense ratio the statements will carry, and the credit tier the best cell requires.
- Know the rung: confirm the band and the credit tier the best cell requires.
- Count the deposits: know the expense ratio the business type carries.
- Know the structure: measure the ratio on the interest-only payment.
Occupancy and loan size decide the leverage
Occupancy chooses the ladder and the balance chooses the band; together they set the leverage ceiling and the credit floor for the best cell. A primary residence starts highest, a second home and an investment property a rung lower, and every larger band steps down — which is why the equity is planned before the price.
How the deposits are counted
Personal statements with business transfers count at full value; business statements carry an expense ratio set by the business type and employee count, or an accountant’s letter; the borrower must own a minimum share of the business, and the deposits must be consistent inside the window.
Interest-only and forty-year structures
An interest-only period is available through select programs at its own leverage cap and credit floor, on a forty-year structure with a ten-year interest-only window on the portfolio program, and on adjustable structures with a lower cap on the bank portfolio program; the ratio is measured on the interest-only payment.
Overlays above the super-jumbo line
Above the overlay line — higher for a primary residence than for a second home or investment property — a Billings file carries a stricter credit floor, a spotless recent housing history, a longer seasoning window, no non-occupant co-borrowers, no rural property, and reserves that cash-out proceeds may not satisfy.
Reserves scale with the loan size
Reserves are months of the full payment, stepping up by loan size, plus additional months for each financed property, more for a first-time investor, and more with a non-occupant co-borrower; on a Billings high-balance file they are a large figure in dollars.
From Billings bank statements to a funded high-balance loan.
Four steps take a Billings, MT high-balance scenario from a first read to funding; the first one is the one most borrowers skip.
Place the balance
The first step is the ladder: where the Billings, MT balance lands for the occupancy, which cell the credit tier opens, and whether the structure should change to land on a better rung.
Count the deposits
The deposits become income by one of the program’s methods; Lendmire chooses the method that reads the Billings, MT business most fairly and packages the statements to support it.
Appraise and package
The appraisals set the value the ladder is applied to; the Billings, MT file is packaged in parallel — statements, credit, reserves, property — in the order the lender reads it.
Close and fund
Underwriting confirms the income, the ratio, the leverage cell, reserves, and the property; the Billings file closes on the terms the ladder allows.
A brokerage built around self-employed borrowers.
Lendmire built its practice on borrowers whose tax returns understate their income, which is why the statement methods, the ladders, and the overlays are familiar ground rather than surprises.
Ladders, not guesses
Lendmire reads the matrix for a Billings balance before anything is ordered, so the equity and the structure are planned around the rung the file will actually land on.
The statements, read fairly
The expense method changes the income; Lendmire chooses the one that reads a Billings business most fairly and packages the statements to support it.
The right wholesale program
Not every wholesale lender carries a self-employed borrower past the standard ceiling, and the ones that do differ on leverage, overlays, and documentation; Lendmire knows which is which.
Trusted by homeowners & investors alike.
Billings super jumbo bank statement loan FAQs
What Billings, MT entrepreneurs want to know about deposit-qualified financing above the standard ceiling — answered at the program level, not the file level.
How is leverage decided on a super jumbo bank statement loan in Billings?
Leverage is read, not negotiated. A Billings file lands on the ladder for its occupancy and in a band by loan size, and the credit tier opens a cell; the calculator on this page reads the current matrix for the exact inputs.
How is my income calculated from bank statements?
Deposits divided by months, after exclusions and the expense ratio. The method chosen for a Billings file changes the income, which is why Lendmire settles it before the lender sees the statements.
Can I take cash out of a high-value Billings home?
Cash-out has its own rungs and its own proceeds cap. A Billings file inside the ladder can return cash at the band’s leverage; above the set leverage the proceeds cap applies.
How much do I need in reserves?
The program counts reserves in months of the full payment — or the interest-only payment on that structure — and scales them with the balance; plan for the payment, not the price.
Can I qualify on a profit-and-loss statement instead?
A profit-and-loss-only path exists on a primary residence at its own leverage cap, prepared by a CPA, enrolled agent or licensed tax preparer — never by the borrower — with a reduction when the preparer cannot confirm filings, and case-by-case treatment above the super-jumbo line.
Is interest-only available?
Through select programs, yes: at its own leverage cap and credit floor, on a forty-year structure with a ten-year interest-only window on the portfolio program, and on adjustable structures with a lower cap on the bank portfolio program. The ratio is measured on the interest-only payment.
What if my deposits fall short but my assets are strong?
Two paths: an asset allowance that adds qualifying income from liquid assets divided over a set number of months — a shorter divisor when it supplements statement income, a longer one when it stands alone or the balance is above the line — at its own leverage cap and seasoning; or an assets-only qualification on liquidity alone, with no ratio calculated and no reserves required.
How long do I need to have been self-employed?
Two years, or one year with two years of prior work in the same field, or one year plus a year of formal training. Wage or fixed income can be combined with the statement income.
What does Lendmire do on a Billings high-balance file?
Places the file on the ladder first, counts the deposits the program’s way, then builds the file for the program that reads it best; Lendmire brokers the loan through its wholesale network and is never the lender.
What credit score does a super jumbo bank statement loan require?
It depends on the balance, the occupancy and the leverage requested. The floor in the snapshot applies at the bottom of the ladder; larger balances and top cells require stronger credit, and a single recent housing late reduces leverage.
Ready to size a Billings balance? Start with the deposits.
Start with the occupancy, the deposits, and the balance you have in mind. No credit pull or commitment is required to request an initial scenario review.
This guide covers Billings — for the statewide ladder, overlays, and scenarios, see Super Jumbo Bank Statement Loans in Montana, part of Lendmire’s super jumbo bank statement loan program.
Also in Montana: Gardiner · Great Falls · Big Sky · Helena · Super Jumbo DSCR Loans in Billings · DSCR Loans in Billings