Current conventional guidelines, updated from one source.
One guideline source feeds every number here, and the page updates when the source does. These are purchase and refinance parameters; the leverage table underneath covers occupancy by occupancy, and the status lines cover insurance, gifts, and the first-time-buyer programs.
First-time buyer; 5% standard; 97% loan-to-value at the top
The agencies set the floor at 3% down for a first-time buyer and 5% for a repeat buyer, on a principal residence; the whole down payment may be a gift from a relative on a one-unit home, and twenty percent down removes mortgage insurance from the payment entirely.
Priced on the score; no agency minimum with an automated approval
A 620 decision score opens the program on the wholesale side; the agencies set no minimum for an automated approval and 620 to 640 for manual underwriting by loan type. The strongest effect of the score is on cost, through loan-level adjustments and the mortgage insurance premium.
Required above 80% LTV; removed at 80% by request, 78% automatically
The insurance line in a conventional payment is a bridge, not a fixture: required above 80% loan-to-value, cancellable at 80% on request and 78% by law, and priced by the insurer on the score inside Fannie Mae’s published 0.58%–1.86% range. Twenty percent down skips it entirely.
With an automated approval; 36% to 45% on a manual file
An automated approval allows a total debt-to-income ratio up to 50%; a manually underwritten file is held to 36%, or 45% when credit score and reserves meet the agencies’ matrix. The ratio divides total housing payment plus other monthly obligations by gross income.
| Purpose | Occupancy and program | Maximum LTV |
|---|---|---|
| Purchase | One-unit principal residence, first-time buyer (fixed rate) | 97% |
| Purchase | One-unit principal residence, standard | 95% |
| Purchase | HomeReady / Home Possible (income limits apply) | 97% |
| Purchase | Two- to four-unit principal residence | 95% |
| Purchase | Second home | 90% |
| Purchase | Investment property, one unit | 85% |
| Purchase | Investment property, two to four units | 75% |
| Refinance | Limited cash-out (rate-and-term), one-unit principal residence | 95% |
| Refinance | Cash-out, one-unit principal residence | 80% |
| Refinance | Cash-out, two to four units, second home or investment | 75% |
| Combined LTV | Maximum contribution |
|---|---|
| above 90 percent | 3% of the sales price |
| 75.01 to 90 percent | 6% of the sales price |
| 75 percent or less | 9% of the sales price |
| investment property (any) | 2% of the sales price |
| Event | Waiting period |
|---|---|
| Chapter 7 or 11 bankruptcy | four years from discharge or dismissal (two years with documented extenuating circumstances) |
| Chapter 13 bankruptcy | two years from discharge; four years from dismissal (two with extenuating circumstances) |
| Multiple bankruptcy filings | five years when more than one filing within the past seven years |
| Foreclosure | seven years (three with extenuating circumstances, then limited to a principal residence or second home at 90 percent LTV, purchase or limited cash-out) |
| Deed-in-lieu, short sale or mortgage charge-off | four years (two with extenuating circumstances) |
Mortgage insurance: Fannie Mae reports that private mortgage insurance typically ranged from 0.58%–1.86% of the loan amount a year; the premium on a specific loan is priced by the insurer on the score, the leverage, and the coverage, and is never quoted here. Gifts from relatives may fund the entire down payment on a one-unit principal residence. HomeReady and Home Possible lend to 97% with income at or below 80% of the area median; HomeOne lends to the same leverage with a first-time buyer and no income limit.
Current conventional snapshot · updated October 3, 2026 · principal residences occupied within sixty days, second homes, and one- to four-unit investment properties · conforming limits apply by county and are confirmed by a Lendmire loan officer · above the limit, see the jumbo program · no prepayment penalty · Lendmire is a broker, never the lender.
Program guidelines only, not an offer of credit. The leverage, credit floor, mortgage insurance thresholds, ratio maximums, contribution caps, and waiting periods on this page are agency parameters and lender overlays subject to change without notice and to full underwriting of the borrower and the property. Mortgage insurance premiums are priced by the insurer and are not quoted here. Lendmire is a broker, not a lender. Licensed in sixteen states for consumer mortgages. NMLS #2371349.
What a conventional loan is — and how the file is qualified.
Nearly every Bellingham conventional file is read by an automated underwriting system against the agencies’ guides, and the few written by hand follow the manual columns of the same rules. The system does not change the rules below; it applies them: the leverage the occupancy allows, how the score is read, when mortgage insurance attaches and ends, and what the ratios and reserves must show.
For the program overview, see Lendmire’s conventional loan program, or the statewide guide at Conventional Loans in Washington; for the mortgage insurance cancellation rules, see the CFPB.
Leverage by occupancy and buyer
The agencies lend most on a home the borrower lives in and less as the occupancy changes: a one-unit principal residence reaches the top leverage, with the first-time buyer’s minimum the lowest down payment in the program; two- to four-unit homes, second homes, and investment properties step down from there, as the table in the snapshot shows for a Bellingham buyer.
Credit scores and automated underwriting
The automated system, DU on the Fannie Mae side and LPA on the Freddie Mac side, reads the whole credit file rather than a single number: the score, the depth of history, the recent events, and the seasoning after any derogatory event. The score it uses with more than one borrower is the average of the median scores.
Mortgage insurance that cancels
The federal cancellation rules are the quiet advantage of a conventional loan. The borrower can ask to drop the insurance when the balance reaches the request threshold, the servicer must drop it at the automatic threshold, and it cannot outlast the midpoint of the term. On an FHA loan at full leverage the premium stays for the life of the loan.
Ratios, reserves, and the DU finding
The automated finding is the hinge of a conventional file: it reads the income, the assets, the credit, and the property, allows a total debt ratio up to the automated maximum, and names the reserves the file must show. A Bellingham underwriter then verifies what the finding assumed.
None of this is a decision. The appraisal can come in under the price, the rate is set at lock, the premium is set by the insurer, and the automated finding sets the reserves. What stays fixed is the structure the calculator reproduces: price, down payment, leverage, insurance, payment.
Where Bellingham buyers borrow — and how a conforming loan fits.
Conventional loans are sized against a local market, and these are Bellingham’s numbers from the U.S. Census Bureau: how many households own, what a typical home is worth, and what households earn. Together they set the scale of a typical down payment, loan, and insurance premium.
These are context figures, not underwriting inputs. Income sets the ratio, value sets the loan and the premium, and the down payment sets the leverage. The Census describes the first two for the market; the file supplies all three for the borrower.
Data sources: U.S. Census Bureau — ACS 5-Year (2024) housing and population estimates, including tenure, home values, gross rents, and household income.
Distinct Bellingham neighborhoods, distinct conventional files.
One program, several Bellingham submarkets: the cards below describe the housing stock, the price range, and the conventional question that comes up most often in each.
Condominiums and townhomes
Townhomes in Bellingham finance like houses when they are fee simple and like condominiums when they are organized as one; the lender settles which before the appraisal, and the leverage follows the occupancy either way. Roughly 18,512 Bellingham households own their homes on the latest Census estimate — 45% of all households, the pool a conventional purchase joins.
Two-to-four-unit homes
The owner-occupied multi-unit Bellingham file is a conventional specialty with its own leverage, its own rent-counting rules, and its own reserve requirement. The buyer in one unit qualifies on the combined picture. About 55% of Bellingham’s households rent — roughly 22,988 renter households on the latest Census estimate.
Newer infill and recent construction
New rows and recent infill in Bellingham tend to appraise cleanly, so the loan amount is the question: a contract near the conforming limit is checked against the county figure before the offer, and a loan above it needs a larger down payment or the jumbo program. Median household income in Bellingham sits near $66,755 on the latest Census estimate.
Established close-in neighborhoods
Renovated and unrenovated homes sit side by side in Bellingham’s established neighborhoods, and the appraisal values each on comparable sales. The leverage, the insurance, and the ratio do not change with the age of the house. On a one-unit principal residence at Bellingham’s median value, the first-time buyer’s minimum down payment comes to about $18,800 and the standard minimum to about $31,400 — before closing costs, and before the mortgage insurance that comes with either; a second home, a multi-unit home, or a rental starts higher, as the leverage table shows.
Investor and second-home purchases
Bellingham rentals and pied-à-terre purchases run on conventional loans because FHA and VA finance principal residences only. Conventional terms include investment and second-home leverage in the snapshot, reserves for each financed property, and adjustments for the occupancy. Bellingham is home to about 93K people.
Higher-value homes
A high-value Bellingham purchase can still be a conforming loan when the loan amount fits under the county limit, and a high-cost county’s higher range extends that reach; above it, the jumbo program takes the file with its own leverage and reserves. The median owner-occupied home value in Bellingham runs near $627,500 on the latest Census estimate.
Across all of Bellingham, five questions settle a conventional loan: what the appraisal supports, whether the property passes the agencies’ review, how the home will be occupied, what the score costs, and what the ratio and reserves allow.
Four ways Bellingham buyers put a conforming loan to work.
A good use of a conventional loan is one its shape fits: a decent score, a down payment of any size from the minimum up, an occupancy the agencies allow, and a loan inside the conforming limit. Four common Bellingham uses follow.
Buy an investment property
A Bellingham investor buying one to four units on a conventional loan puts down what the leverage table shows for investment property, documents agency-allowed rent toward qualifying, and holds reserves the finding requires per financed property. It is an individual agency loan under investment-property rules, not an investor DSCR loan.
Buy a second home
A second home in Bellingham is a conventional file with its own leverage and reserve rules: more down than a principal residence, the payment on the existing home counted in the ratio, and a property the owner occupies part of the year rather than rents full time.
Refinance or take cash out
Refinancing on a conventional loan follows the same leverage table as buying: rate-and-term to the higher limit, cash-out to the lower one. A Bellingham owner who has carried mortgage insurance may also use the refinance to leave it behind once the new loan sits at or below the threshold.
Buy with twenty percent down and no insurance
The move-up Bellingham buyer selling one home and bringing twenty percent to the next usually lands here: no mortgage insurance, the strongest cost tier the score earns, and a loan the automated system reviews with the equity brought forward counted in the file.
Estimate the payment on a Bellingham price before requesting a quote.
The program’s own math on your Bellingham inputs: price less the down payment, amortized at the benchmark, with the insurance estimate added while the leverage is above the threshold and the escrows added throughout. The actual rate, premium, payment, and costs come in writing from a licensed loan officer.
Bellingham conventional payment estimate
Seeded with a Bellingham price and the first-time buyer’s minimum down; every field updates the result as you type.
Editable benchmark: 7.28% as of October 1, 2026 · Freddie Mac 30-year average via FRED®. A conventional market reference, not a conventional loan quote.
Estimate seeded at the low end of Fannie Mae’s published range (0.58%–1.86% a year); the insurer prices the actual premium on the score and the leverage. Applies only above 80% loan-to-value.
Illustrative starting assumptions: a $630,000 price near Bellingham’s median owner-occupied home value, the first-time buyer’s minimum down payment, a thirty-year term at the current Freddie Mac benchmark, mortgage insurance at the low end of Fannie Mae’s published range, property taxes and insurance estimated for Washington (U.S. Census Bureau). Every field is editable.
Illustrative estimate only — not a Loan Estimate, approval, quote, or commitment to lend. The rate field carries the weekly Freddie Mac thirty-year conventional benchmark, a market reference and not a conventional loan quote; your rate is set by the lender at lock. The mortgage insurance figure is an editable estimate seeded from Fannie Mae’s published typical range, not a premium quote; the insurer prices the actual premium, and the cancellation month assumes scheduled payments with no extra principal and no change in value. Taxes, insurance and dues are editable estimates; closing costs are not included. Conforming loan limits apply by county. Licensed in sixteen states for consumer mortgages.
Same buyer, three very different closings.
Choosing among conventional, FHA, and VA in Bellingham is really choosing an insurance structure and a credit standard at the same time. Each is laid out below with the buyer it fits.
Conventional, FHA, or VA.
The program’s strengths are the cancellable insurance, the breadth of occupancies, and a cost structure that rewards a strong score; its weakness is the same structure applied to a weak one. A Bellingham buyer with a strong score usually pays less each month here than on FHA.
FHA asks for a small minimum investment that a gift can cover, accepts a forgiving decision score, and charges an upfront premium plus an annual premium that lasts for the term at full leverage. For a Bellingham buyer with a modest score it usually wins; for a strong score the conventional premium is smaller and temporary. See Lendmire’s FHA loan program.
For an eligible veteran, service member, or surviving spouse, the VA loan drops the down payment and monthly insurance for a one-time funding fee that many disabled veterans do not pay. Where eligible, it usually beats conventional for a Bellingham principal residence; conventional still wins the second home and rental. See Lendmire’s VA loan program.
The decision is rarely close once the profile is known. Conventional tends to win for a strong score and for every non-primary occupancy, FHA for a modest score, and VA for nearly any eligible principal residence. The comparison is run on the actual numbers, in writing. Above the conforming limit, see the jumbo loan program.
What to prepare for a Bellingham scenario review.
Gather these before a Bellingham review: the ordinary mortgage documents, plus the pieces that settle the first-time-buyer question and the occupancy.
This is a general preparation guide, not a universal checklist. The selected lender may request additional information based on the transaction, the property, the automated underwriting finding, and the income picture. Nothing here is legal or tax advice.
Local details that can change the loan.
A handful of details decide whether a Bellingham conventional file closes as planned, closes at a different cost, or stalls. These are the ones that come up most.
Use these checks to keep the Bellingham file clean and fundable.
The list is short because the program is simple at its core: the insurance, the score, and the property decide most Bellingham files before income is even opened.
- Plan the insurance: it cancels on request at the request threshold and automatically at the termination threshold.
- Confirm the score: the score sets the loan-level adjustments and the insurance premium more than it gates the loan.
- Count the properties: the agencies cap the number of financed properties per borrower.
Mortgage insurance: how much, and until when
The premium on a Bellingham loan can be paid monthly, paid by the lender in exchange for a different price, paid as a single premium at closing, or split. The monthly structure cancels under the federal rules, and the others are set by the lender. The calculator shows the monthly structure and the month the thresholds arrive on scheduled payments.
The score sets the cost
The score does two jobs on a Bellingham file: it feeds the automated assessment alongside the rest of the credit file, and it sets the cost of the loan and the insurance. A buyer close to a cost tier sometimes gains more from a short wait and a paid-down balance than from any other change.
Second homes, rentals, and financed-property limits
A Bellingham household can hold several conventional loans at once, but each financed property adds reserves to the next file and the agencies cap the number of financed properties a borrower may have. Second homes and rentals are leveraged lower than a principal residence and priced for the occupancy.
The conforming limit
The conforming limit is the first thing confirmed on a Bellingham file near the top of the market, and the high-balance range in some counties sits above the standard figure. Ask a loan officer for the current limit where you are buying before writing the offer; a loan above it needs a larger down payment or the jumbo program.
Seller contributions and the down payment
Two rules shape the Bellingham contract: the contribution cap, which falls as the leverage rises, and the source rules for the down payment, which allow a full gift on a one-unit principal residence and require a share of the buyer’s own funds on second homes and multi-unit homes above the threshold.
From a Bellingham pre-approval to keys in hand.
A conventional purchase runs in a fixed order: pre-approval through the automated system on the score, the ratio, and the reserves; contract and appraisal or value acceptance; underwriting that verifies what the finding assumed; and closing with the insurance structure set. Here is that order for a Bellingham buyer.
Pre-approval
Start with the score, the income, the down payment, and the occupancy. A Lendmire loan officer runs the automated system, confirms the leverage and the insurance for the down payment chosen, checks the loan against the conforming limit, compares the structure with FHA and VA on the same numbers, and provides the terms in writing.
Contract and appraisal
With the contract signed, the lender orders the appraisal, or accepts the value the automated system offers where a waiver applies. Seller contributions are checked against the cap for the leverage, and a condominium’s project documents are collected for review before the file moves on.
Underwriting
The underwriter verifies what the automated finding assumed: income, assets and reserves, credit and any seasoning, occupancy, and the property. A manual file follows the lower ratio pair instead. Conditions are issued, documented, and cleared before final approval.
Closing
The Bellingham closing applies the program’s structure: the insurance premium in the payment while it applies, the escrow account, and no upfront premium on the monthly structure. The buyer moves in within sixty days on a principal residence, and the servicer tracks the balance toward the cancellation thresholds.
A brokerage that prices the whole market.
A single lender prices a conventional loan one way; a brokerage with several wholesale programs prices it several ways and shows a Bellingham buyer which one costs less on the same score and leverage, with the insurance quoted by the insurer rather than guessed.
Several programs, one set of numbers
A lender with one rate sheet sells that sheet; a brokerage with several can say which fits. For a Bellingham buyer with a strong score that is usually a conventional loan on the program whose cost is lowest for that file; for a modest score it may be FHA, and the arithmetic decides.
The insurance explained before the offer
The premium and its exit are decided by the leverage and the score, and a buyer should know both before signing a contract. Lendmire states the structure for the Bellingham purchase, shows the payment before and after cancellation, and explains the request and automatic thresholds.
Licensed, consumer-purpose, in writing
Lendmire carries the license for the state the Bellingham home is in, delivers the disclosures a consumer mortgage requires, and commits the terms to paper. The program figures on this page are read from one guideline source built on the agencies’ published guides.
Trusted by buyers & families alike.
Bellingham conventional loan FAQs
The questions below come up on nearly every Bellingham conventional conversation. The answers are general; the figures in the snapshot above are the program’s current parameters.
What is a conventional loan, and who is it for?
Conventional means conforming: a loan inside the conforming limit, qualified by an automated underwriting system against the agencies’ rules. A Bellingham buyer applies through a lender or broker, the lender follows the guides, and the agency buys the loan.
How much do I need to put down on a conventional loan in Bellingham?
It depends on who is buying and how the home will be used. A first-time buyer starts at the lowest figure in the snapshot, a repeat buyer slightly higher, and a Bellingham second home or rental higher still. Twenty percent down removes mortgage insurance entirely.
What credit score do I need for a conventional loan?
A conventional loan prices credit rather than simply gating it. The practical floor is the wholesale overlay in the snapshot; the agencies’ own minimum applies only to manual underwriting. Above the floor, the premium and the loan-level adjustments fall as the score rises.
How does private mortgage insurance work, and when does it end?
The premium is a percentage of the loan a year, divided into the monthly payment, and it is set by the insurer on the score and the leverage rather than by a government schedule. It cancels: by request at the request threshold, automatically at the termination threshold, and no later than the midpoint of the term.
What is the conforming loan limit in Bellingham?
Conforming limits are set each year by the FHFA, by county and by unit count, with higher limits in high-cost areas, which is why this page does not quote a figure. A Lendmire loan officer confirms the current limit for the county where you are buying; a loan above it needs a larger down payment to fit under the limit or moves to the jumbo program.
Should I choose a conventional loan or FHA?
Choose by profile: conventional for the buyer whose score earns a small, cancellable premium, FHA for the buyer a conventional loan would price heavily. Many Bellingham buyers start on FHA and refinance into conventional once equity and credit allow.
What are HomeReady, Home Possible, and HomeOne?
Affordable conventional lending in three flavors: two income-limited programs and one first-time-buyer program. The Bellingham buyer who fits one gets the lowest conventional down payment with a lighter insurance requirement.
What does the appraisal check on a conventional loan?
Value first: the loan is sized on the lesser of the price and the appraised value. Condition second: there is no HUD or VA property standard, but the home must be safe, sound, and marketable, and findings on older homes are settled before closing. Where the automated system offers value acceptance or an appraisal waiver, no appraisal is ordered at all.
What debt-to-income ratio does a conventional loan allow?
Up to the automated maximum in the snapshot for a file the automated system approves, measured as the total housing payment, insurance included, plus every other monthly obligation against gross income; a manually underwritten file is held to the lower pair, with the higher figure needing the credit and reserve criteria of the agencies’ matrix. The finding also sets the reserves.
Can I buy a rental property with a conventional loan?
Yes, one to four units, at the investment leverage in the snapshot table, with the rental income counted toward qualifying under the agencies’ rules and reserves required for each financed property. The agencies also cap the number of financed properties one borrower may hold, and the loan is written under their investment-property rules rather than as an investor DSCR loan.
Buy in Bellingham with a low down payment and insurance that ends.
Begin with a scenario review: the price, the down payment, the score, the income, and the occupancy. A licensed Lendmire loan officer prices the file across the wholesale programs, runs it beside FHA and VA, and puts the terms in writing.
This guide covers Bellingham — for the statewide guidelines, markets, and scenarios, see Conventional Loans in Washington, part of Lendmire’s conventional loan program.
Nearby markets in Washington: Anacortes · Mount Vernon · Friday Harbor · Marysville · Everett · Port Angeles · Bothell · Shoreline
Related programs: FHA Loans · Jumbo Loans · Refinance Loans