Current Arlington hard money guidelines, updated from one source.
The figures below are displayed from Lendmire’s centralized hard money standards source and update automatically when current program guidance changes. Final terms remain specific to the borrower, the property, the documented track record, and the selected lending partner.
Maximum loan-to-cost
Top tier for investors with five or more completed projects; 90% with two or more. First-time investors qualify at lower tiers.
Maximum bridge leverage
Purchase without rehab, measured against both the purchase price and the value. Property that needs time rather than work, refinanced once stabilized.
Maximum cash-out LTV
Cash-out and refinance ceiling against current value. Proceeds depend on the payoff, costs, the exit, and complete underwriting.
Minimum FICO
Additional conditions apply under 660. Underwriting is asset-based; the published floor does not by itself reach the top leverage tier.
Every fix-and-flip tier is separately capped at this share of the after-repair value.
Released in draws against completed, inspected work — not at closing.
Interest-only payments; no prepayment penalty.
Current standard-program snapshot · updated August 28, 2026. Loan amounts up to $5,000,000, larger by exception. Ground-up construction up to 90% of cost for builders with three or more completed projects, to 10 units. Figures are outer bounds, not offers; Lendmire is a mortgage broker, not a lender.
Business-purpose financing available in 40 markets, including Washington, D.C. By Census estimate, Arlington has roughly 236,254 residents, a median owner-occupied value of about $895.0K, median gross rent around $2,322, and renter households near 58.7% — context for a hard money file, not project underwriting.
What an Arlington hard money loan is — and how the approval works.
A hard money loan is short-term, business-purpose financing secured by non-owner-occupied real estate. The file is read from the asset outward: the property, the purchase price, the budget, the after-repair value, and the exit come first, and the investor’s documented experience is weighed alongside them rather than personal-income calculations.
The asset and the plan lead the analysis
Underwriting turns on what the property is worth today, what it should be worth once the work is done, and whether the budget and timeline actually get it there. A stronger story can open more leverage.
Leverage is tiered by documented experience
Top leverage tiers are reserved for investors with a record of completed projects. First-time investors qualify at lower tiers rather than being turned away, and the current snapshot above shows where each tier sits today.
Rehab funds in draws, not at closing
Rather than funding at closing, the rehab portion is released against completed, inspected work. Budget, scope, contractor, and draw schedule are built into the file from the start, not added later.
The exit is underwritten alongside the loan
A sale or a refinance into long-term financing repays the note, and lenders look for that path before closing. Mapping the refinance early is where a broker who works both products earns the fee.
Total project cost generally means the purchase price plus the rehab or build budget. Loan-to-cost is limited by the investor’s experience tier, with every tier also capped as a share of the after-repair value. The live program cards above carry the current ceilings, and the calculator below models your own Arlington project. The lender sets the final numbers from the appraisal, the scope of work, and the complete file.
One city, several distinct project types.
Arlington brings together established neighborhoods, newer subdivisions, workforce housing, and blocks where older housing stock creates renovation demand. Each project type carries its own purchase, rehab, resale, and refinance considerations.
These citywide figures give general market context and are not project-level underwriting. Purchase price, scope of work, after-repair value, exit, and program eligibility are still evaluated on the subject property.
Data source: U.S. Census Bureau QuickFacts — Arlington, ACS 5-Year 2020–2024: total population, renter-occupied share of occupied housing units, median value of owner-occupied housing units, and median gross rent.
Distinct Arlington submarkets, distinct project considerations.
Hard money lenders in Arlington, VA underwrite very different projects across the city — cosmetic flips, full renovations, small multifamily repositions, and new construction. Purchase prices, renovation scope, resale depth, and refinance demand all shape each file.
Infill and Ground-Up Construction
Infill lots and teardowns in Arlington support ground-up builds underwritten on the completed value and the builder’s completed projects, with plans, budget, and exit reviewed together with the land.
Older Housing Stock
The older blocks of Arlington are where full renovations live: roofs, systems, and structure alongside finishes, with a scope of work and contingency the lender reads line by line before releasing draws. The exit is usually a resale supported by nearby renovated comparables.
The Rental Refinance Exit
Buy, renovate, lease, refinance is a repeatable Arlington play: hard money carries the purchase and the work, and a DSCR loan on the leased property repays it — both arranged in one place, so the exit is planned first.
The Urban Core
Density in Arlington means condominiums, townhomes, and attached stock, so the association package comes into the file next to the scope of work; deep resale supports the exit and disciplines the after-repair value at the same time.
Small Multifamily
A renter-heavy household mix gives Arlington two-to-four-unit repositions a natural exit: bridge or rehab money to buy and turn the units, then a DSCR refinance on the stabilized rent roll.
Workforce Single-Family
Workforce single-family stock in Arlington keeps a first or second project within reach and gives the finished renovation two exits — resale or a rental refinance — which is why the after-repair value is measured against sales on nearby blocks.
Lendmire can also review eligible investment-property projects throughout the Arlington area, from the core to the surrounding towns. Availability remains subject to the property, the program, and the current lending footprint.
What it looks like in this market.
Three composite projects built from how investors actually buy, renovate, and refinance here, each mapped to the leverage tier and exit that fits it.
Small multifamily, stabilized and refinanced
An investor acquires an under-managed two-to-four-unit building in Arlington on bridge money, turns the units and the rent roll, and refinances into DSCR financing on the improved rents — the exit planned with Lendmire before the first draw.
Fit: bridge or rehab · DSCR refinance exit
Infill construction, builder tier
A builder with completed projects takes an infill lot in Arlington to a finished house, with leverage tiered by track record, capped against the completed value, and the build budget released in draws; the exit is a resale or a rental refinance.
Fit: construction · completed-value cap
First flip, cosmetic scope
An investor with no completed projects takes down a tired single-family house in Arlington, funds purchase and rehab in one loan at the first tier, draws as the work passes inspection, and exits by resale at the after-repair value the lender accepted.
Fit: purchase plus rehab · first-tier leverage
Four ways Arlington investors can use hard money.
Review the core transaction paths available for eligible Arlington investment properties. The right structure depends on the project, the after-repair value, the investor’s experience, credit, reserves, and current lender guidelines.
Fix-and-flip loans
The purchase and the rehab budget close as one loan, with rehab dollars funded in draws against completed work. Leverage follows the investor’s experience tier and is capped against the after-repair value.
Bridge purchase loans
Buy an Arlington property that needs time rather than work — vacancy, condition, or a seller who will not wait for a conventional file — then refinance into long-term financing once it is stabilized.
Cash-out and refinance
Draw equity out of a free-and-clear or low-leverage investment property to fund the next acquisition or rehab, up to the cash-out ceiling in the current snapshot, with the exit underwritten alongside the loan.
Ground-up construction
Residential new builds up to the unit count shown in the snapshot, with leverage set by the builder’s completed projects and capped against the completed value, and the build budget funded in draws.
Model an Arlington project before requesting a quote.
The calculator opens with editable Arlington sample assumptions for purchase price, rehab budget, and after-repair value. Leverage tiers refresh from Lendmire’s centralized hard money standards source. Every field is editable, and the result is a leverage estimate, not a loan offer.
Arlington hard money calculator
Enter the purchase price, the rehab or build budget, and the after-repair value the appraisal should support. The result is the estimated maximum loan at the selected experience tier, before closing costs and reserves.
The leverage tiers shown are today’s program ceilings, read from Lendmire’s centralized hard money standards source.
Starting assumptions for Arlington are illustrative and come from the citywide median owner-occupied housing value. Edit any field.
This is an illustrative leverage estimate, not a cost quote or a loan offer. The ceilings are outer bounds tiered by documented experience; the actual loan amount, draw schedule, reserves, and eligibility are set by the appraisal, the scope of work, and complete underwriting by the selected lender.
What lenders still review after the leverage math.
Leverage gets the attention, but the loan-to-cost ceiling is only one part of the file. A complete Arlington hard money review also takes in the investor’s track record and liquidity, the property’s current and after-repair value, the scope of work, and the exit.
Same investment property, different point in its life.
Short-term and asset-based. The lender underwrites the purchase, the budget, the after-repair value, and the exit, sets leverage by documented experience, and funds the rehab in draws. Designed for property that is not yet stabilized.
Long-term and cash-flow-based. After the property is renovated and rented, a DSCR loan qualifies on the rental income relative to the monthly payment — the usual take-out for a completed Arlington hard money project.
Both products usually appear in one Arlington project — hard money for the purchase and renovation, a DSCR refinance on the stabilized rent roll. Because Lendmire arranges both, the exit is settled before the first draw.
What to prepare for an Arlington hard money review.
The exact list varies, but these four categories are a practical starting point for an investor before requesting a project-specific quote.
This is a general preparation guide, not a universal document checklist. The selected lender may request additional information based on the property, borrower, entity, project, and underwriting findings.
Local details that can change the leverage decision.
In Arlington, local costs, property characteristics, and project logistics can materially change a hard money result or a property’s eligibility. Check the practical issues below before relying on a target leverage or a projected after-repair value.
Use these checks to keep the Arlington file clean and fundable.
The exact treatment varies by lending partner, so the goal here is not to promise a universal outcome. It is to spotlight the main issues an investor should resolve before closing.
After-repair value support
The lender’s after-repair value — from an appraisal or valuation and recent comparable sales — caps every leverage tier, and it will not match an optimistic projection. In Arlington files, an unsupported value is the most frequent reason the loan comes in below expectations.
Scope, budget, and draw inspections
The draw schedule comes from a line-item scope of work with a contingency, a named contractor, and a realistic timeline. Because draws are released only against completed, inspected work, a thin budget or a missing permit stalls the project instead of the paperwork.
Coastal insurance, flood, and wind
On coastal Arlington property, wind and flood exposure sit on top of the builder’s-risk or vacant-property coverage the lender requires. Premiums, deductibles, and availability move the carrying-cost budget and can change the rental refinance that repays the note — resolve them before closing.
Entity vesting and title
Business-purpose loans are commonly vested in an LLC or other entity, with personal guarantees from the members. Formation documents, ownership information, and clean title should be in hand before closing so the entity does not become the reason a closing slips.
The exit and the timeline
Hard money is short-term, so the sale or refinance that repays it has to fit inside the term. For an Arlington property that will be rented, planning the DSCR refinance at the start — seasoning, rent support, and leverage — keeps the exit from becoming a scramble when the note comes due.
From an Arlington project to closing.
Begin with the property and the plan, compare the available structures, document the project, and move through underwriting toward closing and the exit.
Run the project
Send the Arlington property details — purchase price, budget, after-repair value, experience, credit range, and the planned exit.
Compare partners
Lendmire compares multiple hard money and private money options on leverage, draw process, experience fit, and property appetite.
Document the project
Finish the valuation, scope of work, contractor, insurance, title, entity, and asset documentation the selected lender asks for.
Close and exit
Lock the structure, fund the purchase, draw against inspected work, and carry out the sale or refinance that retires the note.
A brokerage built around investor projects.
Projects across Arlington span a first cosmetic flip, ground-up construction, and multi-property portfolios. Those files do not all belong with the same lender.
Partner comparison
Lendmire can compare multiple hard money and private money partners rather than forcing every Arlington project into one lender’s leverage box.
Investor specialization
The review centers on leverage, experience tiers, draw mechanics, entity vesting, reserves, property type, and the exit strategy.
The exit, planned early
Since Lendmire also arranges DSCR financing, the refinance that repays the hard money note can be planned before the first draw is funded.
Trusted by buyers & investors alike.
Arlington hard money loan FAQs
These answers cover the purchase, rehab, construction, entity, leverage, and exit questions Arlington investors commonly raise. Final program terms remain project-specific.
Can I use a hard money loan to buy an Arlington fix-and-flip property?
Yes — eligible Arlington investment properties can be purchased and renovated with a hard money loan through select lending partners. The purchase and the rehab budget close as one loan, the rehab funds in draws against completed work, and leverage is tiered by documented experience and capped against the after-repair value shown in the current snapshot.
Do I need experience to get a hard money loan in Arlington?
No. First-time investors qualify; leverage is tiered by documented completed projects, so a first Arlington project starts at a lower tier than a seasoned investor’s file. The snapshot above shows where every tier sits today.
How do I compare hard money lenders in Arlington, VA?
Weigh the terms that actually move your result — the leverage tier your documented experience qualifies for, how draws are inspected and released, how the after-repair value is set, which property types and Arlington neighborhoods the lender will fund, and how the exit is underwritten. Lendmire compares multiple hard money and private money partners on exactly those factors before placing a file.
What is the exit on an Arlington hard money loan?
Either a sale after the renovation or a refinance into long-term financing — for a rented property, usually a DSCR loan that qualifies on the rental income. Lenders want that path visible before closing, and because Lendmire arranges DSCR financing as well, the Arlington refinance can be planned alongside the hard money loan.
Does coastal insurance affect an Arlington hard money project?
It can — wind, flood, and builder’s-risk coverage on a coastal Arlington property raise carrying costs and can change the exit, particularly when the take-out is a rental refinance. Lenders want that insurance picture settled before closing, not uncovered mid-project.
Can hard money fund ground-up construction in Arlington?
Yes. Eligible ground-up residential builds in Arlington are financed up to the unit count in the snapshot, with leverage set by the builder’s completed projects and capped against the completed value. Plans, budget, builder information, and the exit are reviewed with the land value.
How are rehab draws funded?
The rehab portion is held back at closing and released as work is completed and inspected or documented. The schedule is agreed in advance from the line-item scope of work, so the budget you submit should reflect the real sequence of the job.
What should I submit for an Arlington hard money quote?
Start with the property address or market, the project type, the purchase price or payoff, the rehab or build budget, the expected after-repair value, your completed projects, the entity that will hold title, your credit range, and the timeline. A loan officer can then identify the additional documents the selected lender needs for an Arlington file.
What documents does a hard money lender typically ask for?
Identification and credit authorization, entity documents when an LLC takes title, a list of completed projects, the purchase contract or payoff, a line-item scope of work and budget, contractor details, comparable sales behind the after-repair value, insurance, and evidence of the cash to close and reserves.
How is hard money different from a DSCR loan?
Hard money is short-term and asset-based, funding the purchase and renovation on the after-repair value and the plan with leverage tiered by experience. A DSCR loan is long-term and cash-flow-based, qualifying a rented property on its rental income — which is why one usually repays the other.
Bring the Arlington project. We will help structure the financing.
Begin with a fix-and-flip, bridge purchase, cash-out, or ground-up construction scenario. No credit pull or commitment is required to request an initial review.
This page is Arlington-specific — for guidelines and scenarios statewide, visit Hard Money Loans in Virginia within Lendmire’s hard money loan program.
Also in Arlington: DSCR Loans in Arlington, VA