Current Brick hard money guidelines, updated from one source.
Every figure below comes from Lendmire’s centralized hard money standards source and refreshes when current program guidance changes. Final terms are set on the borrower, the property, the documented track record, and the selected lending partner.
Maximum loan-to-cost
Top tier for investors with five or more completed projects; 90% with two or more. First-time investors qualify at lower tiers.
Maximum bridge leverage
Purchase without rehab, measured against both the purchase price and the value. Property that needs time rather than work, refinanced once stabilized.
Maximum cash-out LTV
Cash-out and refinance ceiling against current value. Proceeds depend on the payoff, costs, the exit, and complete underwriting.
Minimum FICO
Additional conditions apply under 660. Underwriting is asset-based; the published floor does not by itself reach the top leverage tier.
Every fix-and-flip tier is separately capped at this share of the after-repair value.
Released in draws against completed, inspected work — not at closing.
Interest-only payments; no prepayment penalty.
Current standard-program snapshot · updated August 28, 2026. Loan amounts up to $5,000,000, larger by exception. Ground-up construction up to 90% of cost for builders with three or more completed projects, to 10 units. Figures are outer bounds, not offers; Lendmire is a mortgage broker, not a lender.
Business-purpose financing available in 40 markets, including Washington, D.C. By Census estimate, Brick has roughly 75,482 residents, a median owner-occupied value of about $410.6K, median gross rent around $1,756, and renter households near 17.8% — context for a hard money file, not project underwriting.
What a Brick hard money loan is — and how the approval works.
A hard money loan is short-term, business-purpose financing secured by non-owner-occupied real estate. Instead of qualifying primarily through personal-income calculations, the lender starts with the property, the purchase price, the budget, the after-repair value, and the exit — then weighs the investor’s documented experience.
The asset and the plan lead the analysis
Three questions carry the file: what the property is worth today, what it will be worth after the work, and whether the budget and timeline can close that gap. A stronger answer to each can mean more leverage.
Leverage is tiered by documented experience
A record of completed projects unlocks the top leverage tiers. First-time investors start at lower tiers rather than being turned away, and the current snapshot above shows where each tier stands today.
Rehab funds in draws, not at closing
The rehab portion of the loan is released against completed, inspected work rather than at closing. Budget, scope, contractor, and draw schedule are part of the file from the beginning, not an afterthought.
The exit is underwritten alongside the loan
A sale or a refinance into long-term financing is how the note gets repaid. Lenders want to see that path before closing — and planning the refinance early is where a broker who works both products earns the fee.
Total project cost generally means the purchase price plus the rehab or build budget. The experience tier caps loan-to-cost, and a separate cap applies to every tier as a share of the after-repair value. Current ceilings sit in the live program cards above, and the calculator below models your own Brick project. The lender sets the final numbers from the appraisal, the scope of work, and the complete file.
One city, several distinct project types.
Brick brings together established neighborhoods, newer subdivisions, workforce housing, and blocks where older housing stock creates renovation demand. Each project type carries its own purchase, rehab, resale, and refinance considerations.
Citywide figures provide general market context, not project-level underwriting. A lender still evaluates the subject property’s purchase price, scope of work, after-repair value, exit, and program eligibility.
Data source: U.S. Census Bureau QuickFacts — Brick, ACS 5-Year 2020–2024: total population, renter-occupied share of occupied housing units, median value of owner-occupied housing units, and median gross rent.
Distinct Brick submarkets, distinct project considerations.
Hard money lenders in Brick, NJ underwrite very different projects across the city — cosmetic flips, full renovations, small multifamily repositions, and new construction. Purchase prices, renovation scope, resale depth, and refinance demand all shape each file.
The Urban Core
Density in Brick means condominiums, townhomes, and attached stock, so the association package comes into the file next to the scope of work; deep resale supports the exit and disciplines the after-repair value at the same time.
Workforce Single-Family
In Brick’s workforce single-family blocks, purchase and rehab budgets stay manageable and a finished house can sell to an owner-occupant or refinance into rental financing. Lenders focus on whether nearby sales support the after-repair value.
The Suburban Ring
In Brick’s suburban ring, the buyer at the end of a project is usually an owner-occupant, so lenders underwrite full renovations to the resale exit and bridge purchases to a refinance once the house is stabilized.
Newer Stock and Light Rehab
Newer subdivisions in Brick rarely need a gut renovation; the hard money use here is a bridge purchase or a light rehab that stabilizes quickly and refinances into long-term financing. Leverage follows the experience tier, and the exit is usually the refinance.
Infill and Ground-Up Construction
Infill lots and teardowns in Brick support ground-up builds underwritten on the completed value and the builder’s completed projects, with plans, budget, and exit reviewed together with the land.
Older Housing Stock
Older houses in Brick tend to need systems and structural work along with finishes; lenders read the scope and contingency closely, release draws against inspected progress, and measure the after-repair value against renovated sales nearby.
Lendmire can also review eligible investment-property projects throughout the Brick area, from the core to the surrounding towns. Availability remains subject to the property, the program, and the current lending footprint.
What it looks like in this market.
Three composite projects drawn from how investors actually buy, renovate, and refinance here — each mapped to the leverage tier and exit that fits it.
Infill construction, builder tier
A builder with completed projects takes an infill lot in Brick to a finished house, with leverage tiered by track record, capped against the completed value, and the build budget released in draws; the exit is a resale or a rental refinance.
Fit: construction · completed-value cap
First flip, cosmetic scope
A first Brick project: a dated single-family purchase with a cosmetic budget, one loan for purchase and rehab at the first experience tier, draws released as work is inspected, and a resale to an owner-occupant at the accepted after-repair value.
Fit: purchase plus rehab · first-tier leverage
Cash-out to fund the next project
An investor with a free-and-clear Brick rental pulls equity on a hard money cash-out at the current ceiling to fund the next acquisition, with the exit — a sale or a refinance — underwritten just as it would be on a purchase.
Fit: cash-out · exit underwritten
Four ways Brick investors can use hard money.
Review the core transaction paths available for eligible Brick investment properties. The right structure depends on the project, the after-repair value, the investor’s experience, credit, reserves, and current lender guidelines.
Fix-and-flip loans
One loan covers the purchase and the rehab budget, with the rehab funded in draws against completed work. The investor’s experience tier sets the leverage, capped against the after-repair value.
Bridge purchase loans
Close on a Brick property that needs time rather than work — vacancy, condition, or a seller who will not wait for a conventional file — and refinance into long-term financing once it is stabilized.
Cash-out and refinance
Use the equity in a free-and-clear or low-leverage investment property to fund the next acquisition or rehab, within the cash-out ceiling shown in the current snapshot, with the exit underwritten alongside the loan.
Ground-up construction
Residential new construction up to the unit count in the snapshot, with leverage tiered by the builder’s completed projects, capped against the completed value, and the build budget released in draws.
Model a Brick project before requesting a quote.
The calculator starts with editable Brick sample assumptions for purchase price, rehab budget, and after-repair value. Leverage tiers refresh from Lendmire’s centralized hard money standards source. Every field remains editable, and the result is a leverage estimate, not a loan offer.
Brick hard money calculator
Enter the purchase price, the rehab or build budget, and the after-repair value the appraisal should support. The result is the estimated maximum loan at the selected experience tier, before closing costs and reserves.
The leverage tiers shown are today’s program ceilings, read from Lendmire’s centralized hard money standards source.
Illustrative Brick starting assumptions are derived from the citywide median owner-occupied housing value. All fields are editable.
Illustrative leverage estimate only; nothing here is a cost quote or a loan offer. Leverage ceilings are outer bounds tiered by documented experience; the actual loan amount, draw schedule, reserves, and eligibility depend on the appraisal, the scope of work, and complete underwriting by the selected lender.
What lenders still review after the leverage math.
The loan-to-cost ceiling is central, but it is only one part of the file. A complete Brick hard money review also considers the investor’s track record and liquidity, the property’s current and after-repair value, the scope of work, and the exit.
Same investment property, different point in its life.
Short-term, asset-based financing. The purchase, the budget, the after-repair value, and the exit are underwritten; leverage is tiered by documented experience and rehab dollars are released in draws. Built for property that is not yet stabilized.
Long-term and cash-flow-based. Once the property is renovated and rented, a DSCR loan qualifies on the rental income relative to the monthly payment — the typical take-out for a completed Brick hard money project.
Brick projects often run on both: hard money to buy and renovate, then a DSCR refinance once the rent roll is stabilized. Lendmire arranges both, so the exit is planned before the first draw is funded.
What to prepare for a Brick hard money review.
The exact list varies, but these four categories are a practical starting point for an investor before requesting a project-specific quote.
This is a preparation guide rather than a universal checklist; the selected lender may request more based on the property, the borrower, the entity, the project, and what underwriting finds.
Local details that can change the leverage decision.
Local costs, property characteristics, and project logistics in Brick can materially change a hard money result or a property’s eligibility. Review the practical issues below before relying on a target leverage or a projected after-repair value.
Use these checks to keep the Brick file clean and fundable.
The exact treatment varies by lending partner, so the goal here is not to promise a universal outcome. It is to spotlight the main issues an investor should resolve before closing.
After-repair value support
Leverage is capped against the after-repair value the lender accepts — from an appraisal or valuation and recent comparable sales, never from the investor’s number. An optimistic projection is the most common reason a Brick loan closes smaller than expected.
Scope, budget, and draw inspections
The draw schedule comes from a line-item scope of work with a contingency, a named contractor, and a realistic timeline. Because draws are released only against completed, inspected work, it is a thin budget or a missing permit that stalls a project, not the paperwork.
Coastal insurance, flood, and wind
On coastal Brick property, wind and flood exposure sit on top of the builder’s-risk or vacant-property coverage the lender requires. Premiums, deductibles, and availability move the carrying-cost budget and can change the rental refinance that repays the note — resolve them before closing.
Entity vesting and title
Business-purpose loans are commonly vested in an LLC or other entity, with personal guarantees from the members. Formation documents, ownership information, and clean title should be in hand before closing so the entity does not become the reason a closing slips.
Winter schedules and the timeline
Brick winters can push exterior work, inspections, and resale into a narrower window. Build the season into the draw schedule and the exit, and make sure the sale or refinance that repays the note still fits inside the term.
From a Brick project to closing.
Lead with the property and the plan, weigh the available structures, document the project, and move through underwriting toward closing and the exit.
Run the project
Provide the Brick property details, purchase price, budget, after-repair value, experience, credit range, and timing.
Compare partners
Lendmire reviews multiple hard money and private money options for leverage, draw process, experience fit, and property appetite.
Document the project
Finish the valuation, scope of work, contractor, insurance, title, entity, and asset documentation the selected lender asks for.
Close and exit
Settle the structure, fund the purchase, draw against completed work, and complete the sale or the refinance on schedule.
A brokerage built around investor projects.
Brick projects range from a first cosmetic flip to ground-up construction and multi-property portfolios. Those files do not all belong with the same lender.
Partner comparison
Instead of forcing every Brick project into one institution’s box, Lendmire can compare multiple hard money and private money partners.
Investor specialization
The review centers on leverage, experience tiers, draw mechanics, entity vesting, reserves, property type, and the exit that repays the note.
The exit, planned early
Because Lendmire also arranges DSCR financing, the refinance that repays the hard money note can be planned before the purchase closes.
Trusted by buyers & investors alike.
Brick hard money loan FAQs
The answers below take up the purchase, rehab, construction, entity, leverage, and exit questions Brick investors commonly raise. Final program terms remain project-specific.
Can I use a hard money loan to buy a Brick fix-and-flip property?
Yes. Eligible Brick investment properties can be bought and renovated on a hard money loan through select lending partners: one loan for the purchase and the rehab budget, rehab funded in draws against completed work, and leverage tiered by documented experience and capped against the after-repair value in the current snapshot.
Do I need experience to get a hard money loan in Brick?
No. First-time investors are eligible; leverage simply steps up with documented completed projects, so a first project starts at a lower tier than a seasoned investor’s. The snapshot shows today’s tiers, and the calculator models a Brick project at your tier.
How do I compare hard money lenders in Brick, NJ?
Weigh the terms that actually move your result — the leverage tier your documented experience qualifies for, how draws are inspected and released, how the after-repair value is set, which property types and Brick neighborhoods the lender will fund, and how the exit is underwritten. Lendmire compares multiple hard money and private money partners on exactly those factors before placing a file.
What is the exit on a Brick hard money loan?
Either a sale after the renovation or a refinance into long-term financing — for a rented property, usually a DSCR loan that qualifies on the rental income. Lenders want that path visible before closing, and because Lendmire arranges DSCR financing as well, the Brick refinance can be planned alongside the hard money loan.
Can hard money fund ground-up construction in Brick?
Yes — eligible ground-up residential projects in Brick can be financed up to the unit count shown in the snapshot, with leverage tiered by the builder’s completed projects and capped against the completed value. Plans, budget, builder information, and the exit are reviewed alongside the land value.
Does coastal insurance affect a Brick hard money project?
It can — wind, flood, and builder’s-risk coverage on a coastal Brick property raise carrying costs and can change the exit, particularly when the take-out is a rental refinance. Lenders want that insurance picture settled before closing, not uncovered mid-project.
Does the after-repair value come from my estimate?
No — the lender sets the after-repair value from an appraisal or valuation and recent comparable sales, not from the investor’s projection. Build your own estimate the same way, because every leverage tier is capped against the value the lender accepts.
How are rehab draws funded?
Rehab funds are held back at closing and released as work is completed, typically after an inspection or documented progress. The draw schedule is set up front from the scope of work, so a line-item budget and a contractor belong in the file from the beginning.
Can I close a Brick hard money loan in an LLC?
Yes. Business-purpose hard money loans are routinely vested in an LLC, corporation, or partnership, and individual investors qualify as well. Expect to provide formation documents, ownership information, and personal guarantees, with entity eligibility confirmed against the full Brick file.
How long is a hard money loan?
Hard money is short-term: the current snapshot shows the term range, payments are interest-only during the term, and the current program carries no prepayment penalty. It is designed to be repaid by the exit — a sale or a refinance — not carried for years.
Bring the Brick project. We will help structure the financing.
Begin with a fix-and-flip, bridge purchase, cash-out, or ground-up construction scenario. No credit pull or commitment is required to request an initial review.
This page is Brick-specific — for guidelines and scenarios statewide, visit Hard Money Loans in New Jersey within Lendmire’s hard money loan program.
Nearby markets in New Jersey: Newark · Jersey City · Paterson · Lakewood · Elizabeth · Edison · Woodbridge · Toms River
Other loan programs in Brick: DSCR Loans in Brick, NJ · Super Jumbo DSCR Loans in Brick, NJ · Short-Term Rental Loans in Brick, NJ · Investment Property Cash-Out Refinance in Brick, NJ