Current Des Plaines hard money guidelines, updated from one source.
Every figure below comes from Lendmire’s centralized hard money standards source and refreshes when current program guidance changes. Final terms are set on the borrower, the property, the documented track record, and the selected lending partner.
Maximum loan-to-cost
Top tier for investors with five or more completed projects; 90% with two or more. First-time investors qualify at lower tiers.
Maximum bridge leverage
Purchase without rehab, measured against both the purchase price and the value. Property that needs time rather than work, refinanced once stabilized.
Maximum cash-out LTV
Cash-out and refinance ceiling against current value. Proceeds depend on the payoff, costs, the exit, and complete underwriting.
Minimum FICO
Additional conditions apply under 660. Underwriting is asset-based; the published floor does not by itself reach the top leverage tier.
Every fix-and-flip tier is separately capped at this share of the after-repair value.
Released in draws against completed, inspected work — not at closing.
Interest-only payments; no prepayment penalty.
Current standard-program snapshot · updated August 28, 2026. Loan amounts up to $5,000,000, larger by exception. Ground-up construction up to 90% of cost for builders with three or more completed projects, to 10 units. Figures are outer bounds, not offers; Lendmire is a mortgage broker, not a lender.
Business-purpose financing available in 41 markets, including Washington, D.C. In Des Plaines, Census estimates put the population near 59,156, the median owner-occupied value around $335.6K, median gross rent near $1,606, and renters in about 21.7% of households — market context for a hard money file, not project underwriting. Property in Chicago itself is outside the current footprint.
What a Des Plaines hard money loan is — and how the approval works.
A hard money loan is short-term, business-purpose financing secured by non-owner-occupied real estate. Personal-income calculations are not the starting point; the property, the purchase price, the budget, the after-repair value, and the exit are — and the investor’s documented experience is weighed after them.
The asset and the plan lead the analysis
Underwriting asks what the property is worth today, what it will be worth once the work is complete, and whether the budget and timeline get it there. The more convincing the answers, the more leverage may be on the table.
Leverage is tiered by documented experience
The highest leverage tiers belong to investors with a record of completed projects. First-time investors qualify at lower tiers rather than being turned away, and the snapshot above shows where each tier stands today.
Rehab funds in draws, not at closing
The rehab portion of the loan is released against completed, inspected work rather than at closing. Budget, scope, contractor, and draw schedule are part of the file from the beginning, not an afterthought.
The exit is underwritten alongside the loan
A sale or a refinance into long-term financing repays the note, and lenders look for that path before closing. Mapping the refinance early is where a broker who works both products earns the fee.
Total project cost generally means the purchase price plus the rehab or build budget. The investor’s experience tier caps loan-to-cost, and each tier is separately capped as a share of the after-repair value. The live program cards above show the current ceilings; the calculator below lets you model your own Des Plaines project. The lender sets the final numbers from the appraisal, the scope of work, and the complete file.
A local market with several distinct project types.
In Des Plaines, established neighborhoods, newer subdivisions, workforce housing, and blocks with older housing stock each generate renovation demand. Every project type carries its own purchase, rehab, resale, and refinance considerations.
Citywide figures give general market context and are not project-level underwriting. Purchase price, scope of work, after-repair value, exit, and program eligibility are still evaluated on the subject property.
Data source: U.S. Census Bureau QuickFacts — Des Plaines, ACS 5-Year 2020–2024: total population, renter-occupied share of occupied housing units, median value of owner-occupied housing units, and median gross rent.
Distinct Des Plaines submarkets, distinct project considerations.
Hard money lenders in Des Plaines, IL encounter very different projects across the city, from cosmetic flips and full renovations to small multifamily repositions and new construction. Purchase prices, renovation scope, resale depth, and refinance demand shape how every file is underwritten.
Newer Stock and Light Rehab
In the newer parts of Des Plaines, projects are lighter — cosmetic work or a bridge purchase on a house that needs time rather than construction — and the exit is typically a refinance into long-term financing once the property is stabilized.
Condominium and Association Projects
For Des Plaines condominium projects, the association package — documents, budgets, rental rules — becomes part of underwriting next to the scope of work, with a resale as the typical exit.
Infill and Ground-Up Construction
Infill lots and teardowns in Des Plaines support ground-up builds underwritten on the completed value and the builder’s completed projects, with plans, budget, and exit reviewed together with the land.
Older Housing Stock
On Des Plaines’ older blocks, roofs, systems, and structure come with the finishes, so the scope and contingency are read line by line, draws follow inspected work, and renovated comparables set the after-repair value.
The Rental Refinance Exit
In Des Plaines, many investors hold rather than sell: hard money funds the purchase and renovation, the property is leased, and a DSCR refinance repays the note. Arranging both loans in one place keeps the exit planned from the start.
Workforce Single-Family
The workforce neighborhoods of Des Plaines are where first and second projects tend to start: manageable purchase prices, cosmetic to moderate scope, and two exits — a sale to an owner-occupant or a refinance into a rental loan. The after-repair value still needs nearby sales behind it.
Eligible investment-property projects throughout the Des Plaines area, from the core to the surrounding towns, can also be reviewed. Availability remains subject to the property, the program, and the current lending footprint.
What it looks like in this market.
Three composite projects drawn from how investors actually buy, renovate, and refinance here — each mapped to the leverage tier and exit that fits it.
Infill construction, builder tier
A builder with completed projects takes an infill lot in Des Plaines to a finished house, with leverage tiered by track record, capped against the completed value, and the build budget released in draws; the exit is a resale or a rental refinance.
Fit: construction · completed-value cap
First flip, cosmetic scope
An investor with no completed projects takes down a tired single-family house in Des Plaines, funds purchase and rehab in one loan at the first tier, draws as the work passes inspection, and exits by resale at the after-repair value the lender accepted.
Fit: purchase plus rehab · first-tier leverage
Cash-out to fund the next project
An investor with a free-and-clear Des Plaines rental pulls equity on a hard money cash-out at the current ceiling to fund the next acquisition, with the exit — a sale or a refinance — underwritten just as it would be on a purchase.
Fit: cash-out · exit underwritten
Four ways Des Plaines investors can use hard money.
Eligible Des Plaines investment properties can take several transaction paths. Which structure fits depends on the project, the after-repair value, the investor’s experience, credit, reserves, and current lender guidelines.
Fix-and-flip loans
One loan covers the purchase and the rehab budget, with the rehab released in draws against completed work; the experience tier sets the leverage and the after-repair value caps it.
Bridge purchase loans
For a Des Plaines property that is not yet conventional-ready because of vacancy, condition, or timing, a bridge loan closes it at the bridge ceiling and a refinance into long-term financing repays the note once it is stabilized.
Cash-out and refinance
Draw equity out of a free-and-clear or low-leverage investment property to fund the next acquisition or rehab, up to the cash-out ceiling in the current snapshot, with the exit underwritten alongside the loan.
Ground-up construction
Residential new builds up to the unit count shown in the snapshot, with leverage set by the builder’s completed projects and capped against the completed value, and the build budget funded in draws.
Model a Des Plaines project before requesting a quote.
The calculator starts with editable Des Plaines sample assumptions for purchase price, rehab budget, and after-repair value. Leverage tiers refresh from Lendmire’s centralized hard money standards source. Every field remains editable, and the result is a leverage estimate, not a loan offer.
Des Plaines hard money calculator
Enter the purchase price, the rehab or build budget, and the after-repair value the appraisal should support. The result is the estimated maximum loan at the selected experience tier, before closing costs and reserves.
Leverage tiers displayed here are the current program ceilings drawn from Lendmire’s centralized hard money standards source.
Illustrative Des Plaines starting assumptions are derived from the citywide median owner-occupied housing value. All fields are editable.
An illustrative leverage estimate only — not a cost quote and not a loan offer. Leverage ceilings are outer bounds tiered by documented experience, and the loan amount, draw schedule, reserves, and eligibility that actually apply come from the appraisal, the scope of work, and full underwriting by the selected lender.
What lenders still review after the leverage math.
Leverage gets the attention, but the loan-to-cost ceiling is only one part of the file. A complete Des Plaines hard money review also takes in the investor’s track record and liquidity, the property’s current and after-repair value, the scope of work, and the exit.
Same investment property, different point in its life.
Short-term and asset-based. Underwriting covers the purchase, the budget, the after-repair value, and the exit; leverage is tiered by documented experience and the rehab funds in draws. Made for property that is not yet stabilized.
Long-term and cash-flow-based. After the property is renovated and rented, a DSCR loan qualifies on the rental income relative to the monthly payment — the usual take-out for a completed Des Plaines hard money project.
Des Plaines projects often run on both: hard money to buy and renovate, then a DSCR refinance once the rent roll is stabilized. Lendmire arranges both, so the exit is planned before the first draw is funded.
What to prepare for a Des Plaines hard money review.
Exact documentation varies, but these four categories give an investor a practical starting point before requesting a project-specific quote.
This is a general preparation guide rather than a universal document checklist. The selected lender may request additional information based on the property, borrower, entity, project, and underwriting findings.
Local details that can change the leverage decision.
Costs, property characteristics, and project logistics particular to Des Plaines can materially change a hard money result or a property’s eligibility. Go through the practical issues below before relying on a target leverage or a projected after-repair value.
Use these checks to keep the Des Plaines file clean and fundable.
Because treatment differs by lending partner, this is not a promise of a universal outcome; it spotlights the main issues an investor should settle before closing.
After-repair value support
The lender’s after-repair value — from an appraisal or valuation and recent comparable sales — caps every leverage tier, and it will not match an optimistic projection. In Des Plaines files, an unsupported value is the most frequent reason the loan comes in below expectations.
Scope, budget, and draw inspections
The draw schedule comes from a line-item scope of work with a contingency, a named contractor, and a realistic timeline. Because draws are released only against completed, inspected work, it is a thin budget or a missing permit that stalls a project, not the paperwork.
Insurance during the project
An empty or mid-renovation Des Plaines property is covered by builder’s-risk or vacant-property insurance rather than a standard landlord policy, with the lender named. Price that coverage into the carrying costs before closing.
Chicago itself is outside the footprint
Property in Chicago proper is outside the current program; eligible projects in Des Plaines and the surrounding communities remain available. The footprint is reviewed periodically, and the snapshot at the top of this page shows today’s position.
Winter schedules and the timeline
Winter in Des Plaines can compress exterior work, inspections, and resale into a narrower window. Build the season into the draw schedule and the exit so the sale or refinance that repays the note still lands inside the term.
From a Des Plaines project to closing.
Start with the property and the plan, compare the available structures, document the project, and move through underwriting toward closing and the exit.
Run the project
Provide the Des Plaines property details, purchase price, budget, after-repair value, experience, credit range, and the intended exit.
Compare partners
Lendmire compares multiple hard money and private money options on leverage, draw process, experience fit, and property appetite.
Document the project
Finish the valuation, scope of work, contractor, insurance, title, entity, and asset documentation the selected lender asks for.
Close and exit
Settle the structure, fund the purchase, draw against completed work, and complete the sale or the refinance on schedule.
A brokerage built around investor projects.
Projects across Des Plaines span a first cosmetic flip, ground-up construction, and multi-property portfolios. Those files do not all belong with the same lender.
Partner comparison
Instead of forcing every Des Plaines project into a single lender’s leverage box, Lendmire compares multiple hard money and private money partners.
Investor specialization
Leverage, experience tiers, draw mechanics, entity vesting, reserves, property type, and the exit strategy are the focus of the review.
The exit, planned early
Because Lendmire also arranges DSCR financing, the refinance that repays the hard money note can be planned before the first draw is funded.
Trusted by buyers & investors alike.
Des Plaines hard money loan FAQs
Below are answers to the purchase, rehab, construction, entity, leverage, and exit questions Des Plaines investors commonly raise. Final program terms remain project-specific.
Can I use a hard money loan to buy a Des Plaines fix-and-flip property?
Yes. Eligible Des Plaines investment properties can be bought and renovated on a hard money loan through select lending partners: one loan for the purchase and the rehab budget, rehab funded in draws against completed work, and leverage tiered by documented experience and capped against the after-repair value in the current snapshot.
Do I need experience to get a hard money loan in Des Plaines?
No — first-time investors are eligible. Leverage is tiered by documented completed projects, so a first project qualifies at a lower tier than an investor with a longer record. The current snapshot shows where each tier sits today, and the calculator lets you model a Des Plaines project at your own tier.
What is the exit on a Des Plaines hard money loan?
A sale once the renovation is complete, or a refinance into long-term financing — typically a DSCR loan on a rented Des Plaines property. Lenders expect to see that path before closing, and because Lendmire arranges the DSCR refinance too, the exit is planned before the first draw.
How do I compare hard money lenders in Des Plaines, IL?
Focus on what changes your result: the leverage tier your track record qualifies for, how rehab draws are inspected and released, how the after-repair value is set, which property types and Des Plaines markets are accepted, and how the exit is treated. Lendmire weighs multiple hard money and private money partners on those factors before placing a file.
Is hard money available in Des Plaines if Chicago itself is excluded?
It is. The current program excludes property inside Chicago proper; eligible projects in Des Plaines and the neighboring communities remain available, and the snapshot at the top of this page reflects the footprint as it stands today.
Can hard money fund ground-up construction in Des Plaines?
Yes. Eligible ground-up residential builds in Des Plaines are financed up to the unit count in the snapshot, with leverage set by the builder’s completed projects and capped against the completed value. Plans, budget, builder information, and the exit are reviewed with the land value.
Does the after-repair value come from my estimate?
No — the lender sets the after-repair value from an appraisal or valuation and recent comparable sales, not from the investor’s projection. Build your own estimate the same way, because every leverage tier is capped against the value the lender accepts.
How long is a hard money loan?
Hard money runs on the short term range shown in the current snapshot, interest-only for the term and without a prepayment penalty on the current program. It is designed to be repaid by the exit, a sale or a refinance, inside that window.
How are rehab draws funded?
Rehab funds are held back at closing and released as work is completed, typically after an inspection or documented progress. The draw schedule is set up front from the scope of work, so a line-item budget and a contractor belong in the file from the beginning.
Can I close a Des Plaines hard money loan in an LLC?
Yes. Business-purpose hard money loans are routinely vested in an LLC, corporation, or partnership, and individual investors are eligible too. Expect formation documents, ownership information, and personal guarantees in the file, with the closing team confirming Des Plaines title and entity requirements.
Bring the Des Plaines project. We will help structure the financing.
Begin with a fix-and-flip, bridge purchase, cash-out, or ground-up construction scenario. No credit pull or commitment is required to request an initial review.
This page is Des Plaines-specific — for guidelines and scenarios statewide, visit Hard Money Loans in Illinois within Lendmire’s hard money loan program.
Nearby markets in Illinois: Mount Prospect · Arlington Heights · Skokie · Palatine · Schaumburg · Evanston · Oak Park · Hoffman Estates
Other loan programs in Des Plaines: DSCR Loans in Des Plaines, IL · Super Jumbo DSCR Loans in Des Plaines, IL · Short-Term Rental Loans in Des Plaines, IL · Investment Property Cash-Out Refinance in Des Plaines, IL