Current Franklin hard money guidelines, updated from one source.
The figures below display from one centralized hard money standards source and move when program guidance moves. Final terms still depend on the borrower, the property, the documented track record, and the lending partner selected.
Maximum loan-to-cost
Top tier for investors with five or more completed projects; 90% with two or more. First-time investors qualify at lower tiers.
Maximum bridge leverage
Purchase without rehab, measured against both the purchase price and the value. Property that needs time rather than work, refinanced once stabilized.
Maximum cash-out LTV
Cash-out and refinance ceiling against current value. Proceeds depend on the payoff, costs, the exit, and complete underwriting.
Minimum FICO
Additional conditions apply under 660. Underwriting is asset-based; the published floor does not by itself reach the top leverage tier.
Every fix-and-flip tier is separately capped at this share of the after-repair value.
Released in draws against completed, inspected work — not at closing.
Interest-only payments; no prepayment penalty.
Current standard-program snapshot · updated August 28, 2026. Loan amounts up to $5,000,000, larger by exception. Ground-up construction up to 90% of cost for builders with three or more completed projects, to 10 units. Figures are outer bounds, not offers; Lendmire is a mortgage broker, not a lender.
Business-purpose financing available in 40 markets, including Washington, D.C. By Census estimate, Franklin has roughly 87,133 residents, a median owner-occupied value of about $705.4K, median gross rent around $1,923, and renter households near 36.2% — context for a hard money file, not project underwriting.
What a Franklin hard money loan is — and how the approval works.
A hard money loan is short-term, business-purpose financing secured by non-owner-occupied real estate. Personal-income calculations are not the starting point; the property, the purchase price, the budget, the after-repair value, and the exit are — and the investor’s documented experience is weighed after them.
The asset and the plan lead the analysis
Underwriting asks what the property is worth today, what it will be worth once the work is complete, and whether the budget and timeline get it there. The more convincing the answers, the more leverage may be on the table.
Leverage is tiered by documented experience
A record of completed projects unlocks the top leverage tiers. First-time investors start at lower tiers rather than being turned away, and the current snapshot above shows where each tier stands today.
Rehab funds in draws, not at closing
Rehab dollars are released against completed, inspected work rather than at closing. The budget, the scope, the contractor, and the draw schedule are all part of the file from the start, not added later.
The exit is underwritten alongside the loan
The loan is repaid by a sale or by a refinance into long-term financing, and lenders expect to see that path before closing. Planning the refinance early is where a broker who works both products earns the fee.
Total project cost generally means the purchase price plus the rehab or build budget. Loan-to-cost is limited by the investor’s experience tier, with every tier also capped as a share of the after-repair value. The live program cards above carry the current ceilings, and the calculator below models your own Franklin project. The lender sets the final numbers from the appraisal, the scope of work, and the complete file.
A local market with several distinct project types.
Franklin spans established neighborhoods, newer subdivisions, workforce housing, and older blocks where renovation demand is constant. Each project type comes with distinct purchase, rehab, resale, and refinance considerations.
Citywide figures provide general market context, not project-level underwriting. A lender still evaluates the subject property’s purchase price, scope of work, after-repair value, exit, and program eligibility.
Data source: U.S. Census Bureau QuickFacts — Franklin, ACS 5-Year 2020–2024: total population, renter-occupied share of occupied housing units, median value of owner-occupied housing units, and median gross rent.
Distinct Franklin submarkets, distinct project considerations.
Hard money lenders in Franklin, TN see very different projects across the city: cosmetic flips, full renovations, small multifamily repositions, and new construction. Purchase prices, renovation scope, resale depth, and refinance demand all shape how each file is underwritten.
The Urban Core
The dense core of Franklin trades in condominiums, townhomes, and attached product, so the association package — documents, master insurance, rental rules — sits next to the budget in underwriting. Plentiful comparable sales support the exit and discipline the after-repair value.
Small Multifamily
With a renter-heavy household mix, Franklin favors small multifamily repositions — a bridge or rehab loan to buy and improve a two-to-four-unit building, then a DSCR refinance once the rent roll is stabilized.
Workforce Single-Family
The workforce neighborhoods of Franklin are where first and second projects tend to start: manageable purchase prices, cosmetic to moderate scope, and two exits — a sale to an owner-occupant or a refinance into a rental loan. The after-repair value still needs nearby sales behind it.
The Suburban Ring
The suburban ring around Franklin sells finished houses to families, so full renovations are underwritten to that resale, and a bridge purchase covers the house that needs time rather than work.
Newer Stock and Light Rehab
Newer Franklin subdivisions call for light rehabs and bridge purchases rather than gut renovations; the file stabilizes quickly and refinances into long-term financing on a schedule set before closing.
Condominium and Association Projects
Where Franklin projects involve condominiums, the association documents, budgets, and rental rules are reviewed with the scope of work before leverage is set; the exit is most often a resale.
Eligible investment-property projects across the Franklin area, from the core out to the surrounding towns, can also be reviewed; availability depends on the property, the program, and the current lending footprint.
What it looks like in this market.
Three composite projects drawn from how investors actually buy, renovate, and refinance here — each mapped to the leverage tier and exit that fits it.
Infill construction, builder tier
A builder with completed projects takes an infill lot in Franklin to a finished house, with leverage tiered by track record, capped against the completed value, and the build budget released in draws; the exit is a resale or a rental refinance.
Fit: construction · completed-value cap
First flip, cosmetic scope
An investor with no completed projects takes down a tired single-family house in Franklin, funds purchase and rehab in one loan at the first tier, draws as the work passes inspection, and exits by resale at the after-repair value the lender accepted.
Fit: purchase plus rehab · first-tier leverage
Cash-out to fund the next project
An investor with a free-and-clear Franklin rental pulls equity on a hard money cash-out at the current ceiling to fund the next acquisition, with the exit — a sale or a refinance — underwritten just as it would be on a purchase.
Fit: cash-out · exit underwritten
Four ways Franklin investors can use hard money.
These are the core transaction paths available for eligible Franklin investment properties. The right structure depends on the project, the after-repair value, the investor’s experience, credit, reserves, and current lender guidelines.
Fix-and-flip loans
One loan covers the purchase and the rehab budget, with the rehab funded in draws against completed work. The investor’s experience tier sets the leverage, capped against the after-repair value.
Bridge purchase loans
Close on a Franklin property that needs time rather than work — vacancy, condition, or a seller who will not wait for a conventional file — and refinance into long-term financing once it is stabilized.
Cash-out and refinance
Draw equity out of a free-and-clear or low-leverage investment property to fund the next acquisition or renovation, up to the cash-out ceiling in the current snapshot, with the exit underwritten alongside the loan.
Ground-up construction
Residential new builds up to the unit count shown in the snapshot, with leverage set by the builder’s completed projects and capped against the completed value, and the build budget funded in draws.
Model a Franklin project before requesting a quote.
The calculator preloads editable Franklin sample assumptions for purchase price, rehab budget, and after-repair value, and its leverage tiers refresh from Lendmire’s centralized hard money standards source. Change any field; the result is a leverage estimate, not a loan offer.
Franklin hard money calculator
Type in the purchase price, the rehab or build budget, and the after-repair value you expect the appraisal to support. What comes back is the estimated maximum loan at the selected experience tier, before closing costs and reserves.
Leverage tiers shown are the current program ceilings from Lendmire’s centralized hard money standards source.
Starting assumptions for Franklin are illustrative and come from the citywide median owner-occupied housing value. Edit any field.
Illustrative leverage estimate only; nothing here is a cost quote or a loan offer. Leverage ceilings are outer bounds tiered by documented experience; the actual loan amount, draw schedule, reserves, and eligibility depend on the appraisal, the scope of work, and complete underwriting by the selected lender.
What lenders still review after the leverage math.
The loan-to-cost ceiling matters most, but it is only one part of the file. A complete Franklin hard money review also weighs the investor’s track record and liquidity, the property’s current and after-repair value, the scope of work, and the exit.
Same investment property, different point in its life.
Short-term, asset-based financing. The purchase, the budget, the after-repair value, and the exit are underwritten; leverage is tiered by documented experience and rehab dollars are released in draws. Built for property that is not yet stabilized.
Long-term and rent-based: after the renovation is finished and the property is leased, a DSCR loan qualifies on the rental income relative to the payment, which is how most completed Franklin hard money projects are repaid.
Many Franklin projects use both: hard money to buy and renovate, then a DSCR refinance on the stabilized rent roll. Because Lendmire arranges both, the exit is planned before the first draw is funded.
What to prepare for a Franklin hard money review.
Documentation varies by lender, but these four categories give an investor a practical starting point before requesting a project-specific quote.
This is a preparation guide rather than a universal checklist; the selected lender may request more based on the property, the borrower, the entity, the project, and what underwriting finds.
Local details that can change the leverage decision.
In Franklin, local costs, property characteristics, and project logistics can materially change a hard money result or a property’s eligibility. Check the practical issues below before relying on a target leverage or a projected after-repair value.
Use these checks to keep the Franklin file clean and fundable.
Because treatment varies by lending partner, the goal here is not to promise a universal outcome but to spotlight the main issues an investor should resolve before closing.
After-repair value support
The lender’s after-repair value — from an appraisal or valuation and recent comparable sales — caps every leverage tier, and it will not match an optimistic projection. In Franklin files, an unsupported value is the most frequent reason the loan comes in below expectations.
Scope, budget, and draw inspections
The draw schedule comes from a line-item scope of work with a contingency, a contractor, and a realistic timeline. Because draws release only against completed, inspected work, a thin budget or a missing permit stops the project, not just the file.
Insurance during the project
An empty or mid-renovation Franklin property is covered by builder’s-risk or vacant-property insurance rather than a standard landlord policy, with the lender named. Price that coverage into the carrying costs before closing.
Entity vesting and title
Business-purpose loans are commonly vested in an LLC or other entity, with personal guarantees from the members. Formation documents, ownership information, and clean title should be ready before closing so the entity never becomes the reason a closing slips.
The exit and the timeline
Hard money is short-term, so the sale or refinance that repays it has to fit inside the term. For a Franklin property that will be rented, planning the DSCR refinance at the start — seasoning, rent support, and leverage — keeps the exit from becoming a scramble when the note comes due.
From a Franklin project to closing.
Start with the property and the plan, compare the available structures, document the project, and move through underwriting toward closing and the exit.
Run the project
Provide the Franklin property details, purchase price, budget, after-repair value, experience, credit range, and the intended exit.
Compare partners
Lendmire compares multiple hard money and private money options for leverage, draw process, experience fit, and exit flexibility.
Document the project
Finish the valuation, scope of work, contractor, insurance, title, entity, and asset documentation the selected lender asks for.
Close and exit
Finalize the structure, fund the purchase, draw against completed work, and execute the sale or the refinance on schedule.
A brokerage built around investor projects.
Projects across Franklin span a first cosmetic flip, ground-up construction, and multi-property portfolios. Those files do not all belong with the same lender.
Partner comparison
Lendmire compares multiple hard money and private money partners rather than forcing every Franklin project into one institution’s box.
Investor specialization
The review focuses on leverage, experience tiers, draw mechanics, entity vesting, reserves, property type, and the exit strategy.
The exit, planned early
Because Lendmire also arranges DSCR financing, the refinance that repays the hard money note can be planned before the first draw is funded.
Trusted by buyers & investors alike.
Franklin hard money loan FAQs
These answers cover the purchase, rehab, construction, entity, leverage, and exit questions Franklin investors commonly raise. Final program terms remain project-specific.
Can I use a hard money loan to buy a Franklin fix-and-flip property?
Yes. Eligible Franklin investment properties can be bought and renovated with a hard money loan through select lending partners: purchase and rehab budget close as one loan, the rehab is released in draws against inspected work, and leverage follows the experience tier shown in the snapshot above.
Do I need experience to get a hard money loan in Franklin?
No. First-time investors are eligible; leverage simply steps up with documented completed projects, so a first project starts at a lower tier than a seasoned investor’s. The snapshot shows today’s tiers, and the calculator models a Franklin project at yours.
How do I compare hard money lenders in Franklin, TN?
Weigh the terms that actually move your result — the leverage tier your documented experience qualifies for, how draws are inspected and released, how the after-repair value is set, which property types and Franklin neighborhoods the lender will fund, and how the exit is underwritten. Lendmire compares multiple hard money and private money partners on exactly those factors before placing a file.
What is the exit on a Franklin hard money loan?
A sale once the work is done, or a refinance into long-term financing — for a rented property that is typically a DSCR loan qualified on the rental income. Lenders want the path visible before closing, and since Lendmire also arranges DSCR financing, the Franklin refinance can be planned with the hard money loan.
Can hard money fund ground-up construction in Franklin?
Yes. Eligible ground-up residential builds in Franklin can be financed up to the unit count in the snapshot, with leverage tiered by the builder’s completed projects and capped against the completed value; plans, budget, builder experience, and the exit are all reviewed with the land.
How is hard money different from a DSCR loan?
Hard money is short-term and asset-based, funding the purchase and the renovation on the after-repair value and the plan with experience-tiered leverage. A DSCR loan is long-term and cash-flow-based, qualifying a rented property on its rental income. Many projects use both: hard money to renovate, DSCR to hold.
Does the after-repair value come from my estimate?
No. The lender establishes the after-repair value from an appraisal or valuation and comparable sales, not from the investor’s projection. Your estimate should be built the same way — recent, nearby, comparable sales — because every leverage tier is capped against the value the lender accepts.
Can I refinance or take cash out of a Franklin investment property with hard money?
Yes — up to the cash-out and refinance ceiling in the current snapshot. Investors often use cash-out to fund the next Franklin acquisition or rehab, and the exit on a cash-out loan is underwritten just as it is on a purchase.
How long is a hard money loan?
Hard money is short-term financing with a term range shown in the current snapshot, interest-only during the term, and no prepayment penalty on the current program. The loan is meant to be repaid by the exit — a sale or a refinance — rather than carried for years.
Can I close a Franklin hard money loan in an LLC?
Yes — business-purpose hard money loans are commonly vested in an LLC, corporation, or partnership, and individual investors are eligible as well. Formation documents, ownership information, and personal guarantees are typically part of the file, and the closing team confirms the Franklin title and entity requirements.
Bring the Franklin project. We will help structure the financing.
Bring a fix-and-flip, bridge purchase, cash-out, or ground-up construction scenario. No credit pull or commitment is required to request an initial review.
This page is Franklin-specific — for guidelines and scenarios statewide, visit Hard Money Loans in Tennessee within Lendmire’s hard money loan program.
Also in Franklin: DSCR Loans in Franklin, TN