Current Racine hard money guidelines, updated from one source.
The figures below display from one centralized hard money standards source and move when program guidance moves. Final terms still depend on the borrower, the property, the documented track record, and the lending partner selected.
Maximum loan-to-cost
Top tier for investors with five or more completed projects; 90% with two or more. First-time investors qualify at lower tiers.
Maximum bridge leverage
Purchase without rehab, measured against both the purchase price and the value. Property that needs time rather than work, refinanced once stabilized.
Maximum cash-out LTV
Cash-out and refinance ceiling against current value. Proceeds depend on the payoff, costs, the exit, and complete underwriting.
Minimum FICO
Additional conditions apply under 660. Underwriting is asset-based; the published floor does not by itself reach the top leverage tier.
Every fix-and-flip tier is separately capped at this share of the after-repair value.
Released in draws against completed, inspected work — not at closing.
Interest-only payments; no prepayment penalty.
Current standard-program snapshot · updated August 28, 2026. Loan amounts up to $5,000,000, larger by exception. Ground-up construction up to 90% of cost for builders with three or more completed projects, to 10 units. Figures are outer bounds, not offers; Lendmire is a mortgage broker, not a lender.
Business-purpose financing available in 41 markets, including Washington, D.C. By Census estimate, Racine has roughly 77,633 residents, a median owner-occupied value of about $166.5K, median gross rent around $1,033, and renter households near 39.8% — context for a hard money file, not project underwriting.
What a Racine hard money loan is — and how the approval works.
A hard money loan is short-term, business-purpose financing secured by non-owner-occupied real estate. Personal-income calculations are not the starting point; the property, the purchase price, the budget, the after-repair value, and the exit are — and the investor’s documented experience is weighed after them.
The asset and the plan lead the analysis
The central questions are what the property is worth today, what it will be worth once the work is complete, and whether the budget and timeline get it there. The stronger that story, the more leverage may be available.
Leverage is tiered by documented experience
Documented completed projects are what move an investor up the leverage tiers; a first project qualifies at a lower tier rather than being turned away. The snapshot above shows where every tier sits today.
Rehab funds in draws, not at closing
The rehab portion of the loan funds as work is completed and inspected rather than at closing. Budget, scope, contractor, and draw schedule belong in the file from day one rather than being added later.
The exit is underwritten alongside the loan
The note is repaid by a sale or a refinance into long-term financing. Lenders want that path visible before closing — and planning the refinance early is where a broker who works both products earns the fee.
Total project cost generally means the purchase price plus the rehab or build budget. The investor’s experience tier caps loan-to-cost, and each tier is separately capped as a share of the after-repair value. The live program cards above show the current ceilings; the calculator below lets you model your own Racine project. The lender sets the final numbers from the appraisal, the scope of work, and the complete file.
A local market that supports several distinct project types.
In Racine, established neighborhoods, newer subdivisions, workforce housing, and blocks with older housing stock each generate renovation demand. Every project type carries its own purchase, rehab, resale, and refinance considerations.
Citywide figures provide general market context, not project-level underwriting. A lender still evaluates the subject property’s purchase price, scope of work, after-repair value, exit, and program eligibility.
Data source: U.S. Census Bureau QuickFacts — Racine, ACS 5-Year 2020–2024: total population, renter-occupied share of occupied housing units, median value of owner-occupied housing units, and median gross rent.
Distinct Racine submarkets, distinct project considerations.
Hard money lenders in Racine, WI underwrite very different projects across the city — cosmetic flips, full renovations, small multifamily repositions, and new construction. Purchase prices, renovation scope, resale depth, and refinance demand all shape each file.
Infill and Ground-Up Construction
Infill lots and teardowns in Racine support ground-up construction, with leverage tiered by the builder’s completed projects and capped against the completed value. Plans, budget, and the exit are reviewed alongside the land value.
Older Housing Stock
The older blocks of Racine are where full renovations live: roofs, systems, and structure alongside finishes, with a scope of work and contingency the lender reads line by line before releasing draws. The exit is usually a resale supported by nearby renovated comparables.
The Rental Refinance Exit
Some of the most repeatable Racine projects never sell: buy on hard money, renovate, lease, and refinance into a DSCR loan on the property’s rent. Because Lendmire arranges both loans, the take-out is underwritten before the first draw.
The Urban Core
The dense core of Racine trades in condominiums, townhomes, and attached product, so the association package — documents, master insurance, rental rules — sits next to the budget in underwriting. Plentiful comparable sales support the exit and discipline the after-repair value.
Small Multifamily
A solid renter base gives Racine two-to-four-unit repositions a natural exit: bridge or rehab money to buy and turn the units, then a DSCR refinance on the stabilized rent roll.
Workforce Single-Family
Racine’s workforce single-family blocks keep first and second projects within reach — moderate budgets, an owner-occupant resale or a rental refinance as the exit, and an after-repair value measured against sales on nearby streets.
Lendmire can also review eligible investment-property projects throughout the Racine area, from the core to the surrounding towns. Availability remains subject to the property, the program, and the current lending footprint.
What it looks like in this market.
Three composite projects showing how investors actually buy, renovate, and refinance here, each matched to the leverage tier and exit that fits.
Infill construction, builder tier
A Racine infill build: land plus construction budget on one loan, leverage set by the builder’s completed projects and capped against the completed value, draws against inspected progress, and a resale or rental-refinance exit.
Fit: construction · completed-value cap
First flip, cosmetic scope
An investor with no completed projects takes down a tired single-family house in Racine, funds purchase and rehab in one loan at the first tier, draws as the work passes inspection, and exits by resale at the after-repair value the lender accepted.
Fit: purchase plus rehab · first-tier leverage
Cash-out to fund the next project
An investor with a free-and-clear Racine rental pulls equity on a hard money cash-out at the current ceiling to fund the next acquisition, with the exit — a sale or a refinance — underwritten just as it would be on a purchase.
Fit: cash-out · exit underwritten
Four ways Racine investors can use hard money.
Four transaction paths cover most eligible Racine investment properties. The structure that fits depends on the project, the after-repair value, the investor’s experience, credit, reserves, and current lender guidelines.
Fix-and-flip loans
Purchase and rehab budget in one loan, with the rehab funded in draws against completed work. Leverage is set by the investor’s experience tier and capped against the after-repair value.
Bridge purchase loans
For a Racine property that is not yet conventional-ready because of vacancy, condition, or timing, a bridge loan closes it at the bridge ceiling and a refinance into long-term financing repays the note once it is stabilized.
Cash-out and refinance
Use the equity in a free-and-clear or low-leverage investment property to fund the next acquisition or rehab, within the cash-out ceiling shown in the current snapshot, with the exit underwritten alongside the loan.
Ground-up construction
Residential new construction up to the unit count in the snapshot, with leverage tiered by the builder’s completed projects, capped against the completed value, and the build budget released in draws.
Model a Racine project before requesting a quote.
The calculator opens with editable Racine sample assumptions for purchase price, rehab budget, and after-repair value. Leverage tiers refresh from Lendmire’s centralized hard money standards source. Every field is editable, and the result is a leverage estimate, not a loan offer.
Racine hard money calculator
Enter the purchase price, the rehab or build budget, and the after-repair value you expect the appraisal to support. The result is the estimated maximum loan at the selected experience tier, before closing costs and reserves.
The leverage tiers shown are today’s program ceilings, read from Lendmire’s centralized hard money standards source.
Illustrative Racine starting assumptions are derived from the citywide median owner-occupied housing value. All fields are editable.
Illustrative leverage estimate only; nothing here is a cost quote or a loan offer. Leverage ceilings are outer bounds tiered by documented experience; the actual loan amount, draw schedule, reserves, and eligibility depend on the appraisal, the scope of work, and complete underwriting by the selected lender.
What lenders still review after the leverage math.
Leverage gets the attention, but the loan-to-cost ceiling is only one part of the file. A complete Racine hard money review also takes in the investor’s track record and liquidity, the property’s current and after-repair value, the scope of work, and the exit.
Same investment property, different point in its life.
Short-term, asset-based financing. The purchase, the budget, the after-repair value, and the exit are underwritten; leverage is tiered by documented experience and rehab dollars are released in draws. Built for property that is not yet stabilized.
Long-term and cash-flow-based. When the property is renovated and rented, a DSCR loan qualifies on the rental income relative to the monthly payment, which is the typical take-out for a completed Racine hard money project.
Many Racine projects use both: hard money to buy and renovate, then a DSCR refinance on the stabilized rent roll. Because Lendmire arranges both, the exit is planned before the first draw is funded.
What to prepare for a Racine hard money review.
Documentation varies by lender, but these four categories give an investor a practical starting point before requesting a project-specific quote.
This is a preparation guide rather than a universal checklist; the selected lender may request more based on the property, the borrower, the entity, the project, and what underwriting finds.
Local details that can change the leverage decision.
Local costs, property characteristics, and project logistics in Racine can change a hard money result or a property’s eligibility materially — review the practical issues below before relying on a target leverage or projected after-repair value.
Use these checks to keep the Racine file clean and fundable.
Because treatment differs by lending partner, this is not a promise of a universal outcome; it spotlights the main issues an investor should settle before closing.
After-repair value support
The lender’s after-repair value — from an appraisal or valuation and recent comparable sales — caps every leverage tier, and it will not match an optimistic projection. In Racine files, an unsupported value is the most frequent reason the loan comes in below expectations.
Scope, budget, and draw inspections
A line-item scope of work with a contingency, a contractor, and a realistic timeline sets the draw schedule. Draws are released against completed, inspected work, so it is a thin budget or a missing permit, not the paperwork, that stalls a project.
Insurance during the project
An empty or mid-renovation Racine property is covered by builder’s-risk or vacant-property insurance rather than a standard landlord policy, with the lender named. Price that coverage into the carrying costs before closing.
Entity vesting and title
Business-purpose loans are commonly vested in an LLC or other entity, with personal guarantees from the members. Formation documents, ownership information, and clean title should be ready before closing so the entity never becomes the reason a closing slips.
Winter schedules and the timeline
In Racine, winter narrows the window for exterior work, inspections, and resale. Plan the draw schedule and the exit around the season so the sale or refinance that repays the note still lands inside the term.
From a Racine project to closing.
Lead with the property and the plan, weigh the available structures, document the project, and move through underwriting toward closing and the exit.
Run the project
Provide the Racine property details, purchase price, budget, after-repair value, experience, credit range, and the intended exit.
Compare partners
Multiple hard money and private money options are compared on leverage, draw mechanics, experience fit, and how flexible the exit is.
Document the project
Complete the appraisal or valuation, scope of work, contractor, insurance, title, entity, and asset documentation the lender requires.
Close and exit
Finalize the structure, fund the purchase, draw against completed work, and execute the sale or the refinance on schedule.
A brokerage built around investor projects.
Projects across Racine span a first cosmetic flip, ground-up construction, and multi-property portfolios. Those files do not all belong with the same lender.
Partner comparison
Lendmire can compare multiple hard money and private money partners rather than forcing every Racine project into one lender’s leverage box.
Investor specialization
The review centers on leverage, experience tiers, draw mechanics, entity vesting, reserves, property type, and the exit that repays the note.
The exit, planned early
Because Lendmire also arranges DSCR financing, the refinance that repays the hard money note can be planned before the purchase closes.
Trusted by buyers & investors alike.
Racine hard money loan FAQs
Below are answers to the purchase, rehab, construction, entity, leverage, and exit questions Racine investors commonly raise. Final program terms remain project-specific.
Can I use a hard money loan to buy a Racine fix-and-flip property?
Yes. Eligible Racine investment properties can be bought and renovated on a hard money loan through select lending partners: one loan for the purchase and the rehab budget, rehab funded in draws against completed work, and leverage tiered by documented experience and capped against the after-repair value in the current snapshot.
How do I compare hard money lenders in Racine, WI?
Compare them on the things that change your outcome: the leverage tier your experience actually qualifies for, how rehab draws are inspected and released, how the after-repair value is established, which property types and Racine markets they accept, and how the exit is treated. Lendmire compares multiple hard money and private money partners on exactly those factors before a file is placed.
What is the exit on a Racine hard money loan?
Either a sale after the renovation or a refinance into long-term financing — for a rented property, usually a DSCR loan that qualifies on the rental income. Lenders want that path visible before closing, and because Lendmire arranges DSCR financing as well, the Racine refinance can be planned alongside the hard money loan.
Do I need experience to get a hard money loan in Racine?
No. First-time investors are eligible; leverage simply steps up with documented completed projects, so a first project starts at a lower tier than a seasoned investor’s. The snapshot shows today’s tiers, and the calculator models a Racine project at your tier.
Can hard money fund ground-up construction in Racine?
Yes. Eligible ground-up residential builds in Racine are financed up to the unit count in the snapshot, with leverage set by the builder’s completed projects and capped against the completed value. Plans, budget, builder information, and the exit are reviewed with the land value.
Can I close a Racine hard money loan in an LLC?
Yes. Business-purpose hard money loans are routinely vested in an LLC, corporation, or partnership, and individual investors qualify as well. Expect to provide formation documents, ownership information, and personal guarantees, with entity eligibility confirmed against the full Racine file.
Is a hard money loan a consumer mortgage in Racine?
No. Hard money and private money loans arranged through Lendmire are business-purpose loans on non-owner-occupied Racine investment property — not consumer mortgages — and the property cannot serve as the borrower’s residence.
How is hard money different from a DSCR loan?
Hard money is short-term and asset-based, funding the purchase and the renovation on the after-repair value and the plan with experience-tiered leverage. A DSCR loan is long-term and cash-flow-based, qualifying a rented property on its rental income. Many projects use both: hard money to renovate, DSCR to hold.
Does the after-repair value come from my estimate?
No — the lender sets the after-repair value from an appraisal or valuation and recent comparable sales, not from the investor’s projection. Build your own estimate the same way, because every leverage tier is capped against the value the lender accepts.
What documents does a hard money lender typically ask for?
Identification and credit authorization, entity documents when vesting in an LLC, a list of completed projects, the purchase contract or payoff, a line-item scope of work and budget, contractor information, comparable sales supporting the after-repair value, evidence of the cash to close, and insurance and title information. The selected lender may ask for more based on the project.
Bring the Racine project. We will help structure the financing.
Start with a fix-and-flip, bridge purchase, cash-out, or ground-up construction scenario. No credit pull or commitment is required to request an initial review.
This page is Racine-specific — for guidelines and scenarios statewide, visit Hard Money Loans in Wisconsin within Lendmire’s hard money loan program.
Nearby markets in Wisconsin: Mount Pleasant · Kenosha · West Allis · Milwaukee · Waukesha · Lake Geneva · Janesville · Beloit
Other loan programs in Racine: DSCR Loans in Racine, WI · Super Jumbo DSCR Loans in Racine, WI · Short-Term Rental Loans in Racine, WI · Investment Property Cash-Out Refinance in Racine, WI