Current Revere hard money guidelines, updated from one source.
The figures below are displayed from Lendmire’s centralized hard money standards source and update automatically when current program guidance changes. Final terms remain specific to the borrower, the property, the documented track record, and the selected lending partner.
Maximum loan-to-cost
Top tier for investors with five or more completed projects; 90% with two or more. First-time investors qualify at lower tiers.
Maximum bridge leverage
Purchase without rehab, measured against both the purchase price and the value. Property that needs time rather than work, refinanced once stabilized.
Maximum cash-out LTV
Cash-out and refinance ceiling against current value. Proceeds depend on the payoff, costs, the exit, and complete underwriting.
Minimum FICO
Additional conditions apply under 660. Underwriting is asset-based; the published floor does not by itself reach the top leverage tier.
Every fix-and-flip tier is separately capped at this share of the after-repair value.
Released in draws against completed, inspected work — not at closing.
Interest-only payments; no prepayment penalty.
Current standard-program snapshot · updated August 28, 2026. Loan amounts up to $5,000,000, larger by exception. Ground-up construction up to 90% of cost for builders with three or more completed projects, to 10 units. Figures are outer bounds, not offers; Lendmire is a mortgage broker, not a lender.
Business-purpose financing available in 40 markets, including Washington, D.C. In Revere, Census estimates put the population near 60,012, the median owner-occupied value around $597.4K, median gross rent near $2,076, and renters in about 54.4% of households — market context for a hard money file, not project underwriting.
What a Revere hard money loan is — and how the approval works.
A hard money loan is short-term, business-purpose financing secured by non-owner-occupied real estate. The lender does not lead with personal-income calculations; it leads with the property, the purchase price, the budget, the after-repair value, and the exit, then weighs the investor’s documented experience.
The asset and the plan lead the analysis
The questions that matter are what the property is worth now, what it will be worth when the work is finished, and whether the budget and timeline can deliver it. The more convincing that story, the more leverage may be available.
Leverage is tiered by documented experience
A record of completed projects unlocks the top leverage tiers. First-time investors start at lower tiers rather than being turned away, and the current snapshot above shows where each tier stands today.
Rehab funds in draws, not at closing
Rehab dollars are released against completed, inspected work rather than at closing. The budget, the scope, the contractor, and the draw schedule are all part of the file from the start, not added later.
The exit is underwritten alongside the loan
A sale or a refinance into long-term financing is how the note gets repaid. Lenders want to see that path before closing — and planning the refinance early is where a broker who works both products earns the fee.
Total project cost generally means the purchase price plus the rehab or build budget. Loan-to-cost is limited by the investor’s experience tier, with every tier also capped as a share of the after-repair value. The live program cards above carry the current ceilings, and the calculator below models your own Revere project. The lender sets the final numbers from the appraisal, the scope of work, and the complete file.
A local market with several distinct project types.
Across Revere, established neighborhoods, newer subdivisions, workforce housing, and blocks with older housing stock each create renovation demand of their own. Each project type carries different purchase, rehab, resale, and refinance considerations.
Citywide figures provide general market context, not project-level underwriting. A lender still evaluates the subject property’s purchase price, scope of work, after-repair value, exit, and program eligibility.
Data source: U.S. Census Bureau QuickFacts — Revere, ACS 5-Year 2020–2024: total population, renter-occupied share of occupied housing units, median value of owner-occupied housing units, and median gross rent.
Distinct Revere submarkets, distinct project considerations.
Hard money lenders in Revere, MA underwrite very different projects across the city — cosmetic flips, full renovations, small multifamily repositions, and new construction. Purchase prices, renovation scope, resale depth, and refinance demand all shape each file.
Small Multifamily
Because many Revere households rent, two-to-four-unit repositions have a built-in exit here: stabilize the building on hard money, turn the units, then refinance into DSCR financing on the improved rents.
Workforce Single-Family
Revere’s workforce single-family blocks keep first and second projects within reach — moderate budgets, an owner-occupant resale or a rental refinance as the exit, and an after-repair value measured against sales on nearby streets.
The Suburban Ring
The suburban neighborhoods around Revere favor full renovations that sell to families at completion, with a bridge purchase as the alternative when the property needs time rather than work. Comparable resales set the after-repair value.
Newer Stock and Light Rehab
Newer subdivisions in Revere rarely need a gut renovation; the hard money use here is a bridge purchase or a light rehab that stabilizes quickly and refinances into long-term financing. Leverage follows the experience tier, and the exit is usually the refinance.
Infill and Ground-Up Construction
Ground-up construction on Revere infill lots is underwritten on the completed value and the builder’s track record, with the plans, the budget, and the exit reviewed together with the land value.
Older Housing Stock
On Revere’s older blocks, roofs, systems, and structure come with the finishes, so the scope and contingency are read line by line, draws follow inspected work, and renovated comparables set the after-repair value.
Lendmire can also review eligible investment-property projects throughout the Revere area, from the core to the surrounding towns. Availability remains subject to the property, the program, and the current lending footprint.
What it looks like in this market.
Three composite projects that mirror how investors buy, renovate, and refinance in this market — each tied to the leverage tier and exit that fits it.
Small multifamily, stabilized and refinanced
A Revere two-to-four-unit building with below-market rents is bought on a bridge loan, renovated unit by unit, and refinanced into DSCR financing once the rent roll is stabilized; the refinance is mapped before closing.
Fit: bridge or rehab · DSCR refinance exit
Infill construction, builder tier
A Revere infill build: land plus construction budget on one loan, leverage set by the builder’s completed projects and capped against the completed value, draws against inspected progress, and a resale or rental-refinance exit.
Fit: construction · completed-value cap
First flip, cosmetic scope
A first-time investor buys a dated single-family house in Revere with a cosmetic scope, closes purchase and rehab as one loan at the first experience tier, draws against completed work, and sells to an owner-occupant at the after-repair value the lender accepted.
Fit: purchase plus rehab · first-tier leverage
Four ways Revere investors can use hard money.
Review the core transaction paths available for eligible Revere investment properties. The right structure depends on the project, the after-repair value, the investor’s experience, credit, reserves, and current lender guidelines.
Fix-and-flip loans
One loan covers the purchase and the rehab budget, with the rehab funded in draws against completed work. The investor’s experience tier sets the leverage, capped against the after-repair value.
Bridge purchase loans
Close on a Revere property that needs time rather than work — vacancy, condition, or a seller who will not wait for a conventional file — and refinance into long-term financing once it is stabilized.
Cash-out and refinance
Draw equity out of a free-and-clear or low-leverage investment property to fund the next acquisition or rehab, up to the cash-out ceiling in the current snapshot, with the exit underwritten alongside the loan.
Ground-up construction
Ground-up residential builds up to the unit count shown above; the builder’s completed projects set the leverage tier, the completed value caps it, and the construction budget is funded through draws.
Model a Revere project before requesting a quote.
Editable Revere sample assumptions for purchase price, rehab budget, and after-repair value load first. Leverage tiers refresh from Lendmire’s centralized hard money standards source. Every field can be changed, and the result is a leverage estimate, not a loan offer.
Revere hard money calculator
Enter the purchase price, the rehab or build budget, and the after-repair value you expect the appraisal to support. The result is the estimated maximum loan at the selected experience tier, before closing costs and reserves.
Leverage tiers shown are the current program ceilings from Lendmire’s centralized hard money standards source.
The Revere starting assumptions are illustrative, derived from the citywide median owner-occupied housing value; every field is editable.
Illustrative leverage estimate only; nothing here is a cost quote or a loan offer. Leverage ceilings are outer bounds tiered by documented experience; the actual loan amount, draw schedule, reserves, and eligibility depend on the appraisal, the scope of work, and complete underwriting by the selected lender.
What lenders still review after the leverage math.
The loan-to-cost ceiling is the headline, but it is only one part of the file. A complete Revere hard money review also covers the investor’s track record and liquidity, the property’s current and after-repair value, the scope of work, and the exit.
Same investment property, different point in its life.
Short-term, asset-based financing. The purchase, the budget, the after-repair value, and the exit are underwritten; leverage is tiered by documented experience and rehab dollars are released in draws. Built for property that is not yet stabilized.
Long-term and rent-based: after the renovation is finished and the property is leased, a DSCR loan qualifies on the rental income relative to the payment, which is how most completed Revere hard money projects are repaid.
Many Revere projects run on both products — hard money to buy and renovate, then a DSCR refinance on the stabilized rent roll. Since Lendmire arranges both, the exit is planned before the first draw is funded.
What to prepare for a Revere hard money review.
Documentation varies by lender and project, but these four categories give an investor a practical starting point before requesting a project-specific quote.
This is a preparation guide rather than a universal checklist; the selected lender may request more based on the property, the borrower, the entity, the project, and what underwriting finds.
Local details that can change the leverage decision.
Local costs, property characteristics, and project logistics in Revere can materially change a hard money result or a property’s eligibility. Review the practical issues below before relying on a target leverage or a projected after-repair value.
Use these checks to keep the Revere file clean and fundable.
Treatment varies by lending partner, so the goal here is not to promise a universal outcome. It is to spotlight the main issues an investor should resolve before closing.
After-repair value support
The lender’s after-repair value — from an appraisal or valuation and recent comparable sales — caps every leverage tier, and it will not match an optimistic projection. In Revere files, an unsupported value is the most frequent reason the loan comes in below expectations.
Scope, budget, and draw inspections
The draw schedule comes from a line-item scope of work with a contingency, a contractor, and a realistic timeline. Because draws release only against completed, inspected work, a thin budget or a missing permit stops the project, not just the file.
Coastal insurance, flood, and wind
Coastal Revere projects add wind and flood exposure to the builder’s-risk or vacant-property coverage the lender requires. Premiums, deductibles, and availability change the carrying-cost budget and can affect the rental refinance that repays the note, so settle the insurance picture before closing.
Entity vesting and title
Vesting in an LLC or other entity is common on business-purpose loans, with personal guarantees from the members. Have formation documents, ownership information, and clean title ready before closing so the entity never becomes the reason a closing slips.
Winter schedules and the timeline
Winter in Revere can compress exterior work, inspections, and resale into a narrower window. Build the season into the draw schedule and the exit so the sale or refinance that repays the note still lands inside the term.
From a Revere project to closing.
Lead with the property and the plan, weigh the available structures, document the project, and move through underwriting toward closing and the exit.
Run the project
Provide the Revere property details, purchase price, budget, after-repair value, experience, credit range, and the intended exit.
Compare partners
Lendmire compares multiple hard money and private money options for leverage, draw process, experience fit, and exit flexibility.
Document the project
Assemble the appraisal or valuation, scope of work, contractor, insurance, title, entity, and asset documentation the lender requires.
Close and exit
Settle the structure, fund the purchase, draw against completed work, and complete the sale or the refinance on schedule.
A brokerage built around investor projects.
Projects across Revere span a first cosmetic flip, ground-up construction, and multi-property portfolios. Those files do not all belong with the same lender.
Partner comparison
Instead of forcing every Revere project into one institution’s box, Lendmire can compare multiple hard money and private money partners.
Investor specialization
The review centers on leverage, experience tiers, draw mechanics, entity vesting, reserves, property type, and the exit that repays the note.
The exit, planned early
Lendmire also arranges DSCR financing, so the refinance that repays the hard money note can be planned before the first draw is funded.
Trusted by buyers & investors alike.
Revere hard money loan FAQs
These answers address the purchase, rehab, construction, entity, leverage, and exit questions Revere investors commonly raise. Final program terms remain project-specific.
Can I use a hard money loan to buy a Revere fix-and-flip property?
Yes — eligible Revere investment properties can be purchased and renovated with a hard money loan through select lending partners. The purchase and the rehab budget close as one loan, the rehab funds in draws against completed work, and leverage is tiered by documented experience and capped against the after-repair value shown in the current snapshot.
How do I compare hard money lenders in Revere, MA?
Focus on what changes your result: the leverage tier your track record qualifies for, how rehab draws are inspected and released, how the after-repair value is set, which property types and Revere markets are accepted, and how the exit is treated. Lendmire weighs multiple hard money and private money partners on those factors before placing a file.
Do I need experience to get a hard money loan in Revere?
No — first-time investors are eligible. Leverage is tiered by documented completed projects, so a first project qualifies at a lower tier than an investor with a longer record. The current snapshot shows where each tier sits today, and the calculator lets you model a Revere project at your own tier.
What is the exit on a Revere hard money loan?
A sale once the work is done, or a refinance into long-term financing — for a rented property that is typically a DSCR loan qualified on the rental income. Lenders want the path visible before closing, and since Lendmire also arranges DSCR financing, the Revere refinance can be planned with the hard money loan.
Can hard money fund ground-up construction in Revere?
Yes — eligible ground-up residential projects in Revere can be financed up to the unit count shown in the snapshot, with leverage tiered by the builder’s completed projects and capped against the completed value. Plans, budget, builder information, and the exit are reviewed alongside the land value.
Does coastal insurance affect a Revere hard money project?
It can — wind, flood, and builder’s-risk coverage on a coastal Revere property raise carrying costs and can change the exit, particularly when the take-out is a rental refinance. Lenders want that insurance picture settled before closing, not uncovered mid-project.
How long is a hard money loan?
Hard money is short-term financing with a term range shown in the current snapshot, interest-only during the term, and no prepayment penalty on the current program. The loan is meant to be repaid by the exit — a sale or a refinance — rather than carried for years.
Can I close a Revere hard money loan in an LLC?
Yes. Business-purpose hard money loans are routinely vested in an LLC, corporation, or partnership, and individual investors are eligible too. Expect formation documents, ownership information, and personal guarantees in the file, with the closing team confirming Revere title and entity requirements.
How is hard money different from a DSCR loan?
Hard money is short-term and asset-based, funding the purchase and the renovation on the after-repair value and the plan with experience-tiered leverage. A DSCR loan is long-term and cash-flow-based, qualifying a rented property on its rental income. Many projects use both: hard money to renovate, DSCR to hold.
Can I refinance or take cash out of a Revere investment property with hard money?
Yes, within the cash-out and refinance ceiling shown in the current snapshot. Cash-out is commonly used to fund the next Revere acquisition or rehab, and the lender underwrites the exit on the cash-out loan the same way it does on a purchase.
Bring the Revere project. We will help structure the financing.
Bring a fix-and-flip, bridge purchase, cash-out, or ground-up construction scenario; an initial review requires no credit pull and no commitment.
This page is Revere-specific — for guidelines and scenarios statewide, visit Hard Money Loans in Massachusetts within Lendmire’s hard money loan program.
Also in Revere: DSCR Loans in Revere, MA