Current Union City hard money guidelines, updated from one source.
The figures below display from one centralized hard money standards source and move when program guidance moves. Final terms still depend on the borrower, the property, the documented track record, and the lending partner selected.
Maximum loan-to-cost
Top tier for investors with five or more completed projects; 90% with two or more. First-time investors qualify at lower tiers.
Maximum bridge leverage
Purchase without rehab, measured against both the purchase price and the value. Property that needs time rather than work, refinanced once stabilized.
Maximum cash-out LTV
Cash-out and refinance ceiling against current value. Proceeds depend on the payoff, costs, the exit, and complete underwriting.
Minimum FICO
Additional conditions apply under 660. Underwriting is asset-based; the published floor does not by itself reach the top leverage tier.
Every fix-and-flip tier is separately capped at this share of the after-repair value.
Released in draws against completed, inspected work — not at closing.
Interest-only payments; no prepayment penalty.
Current standard-program snapshot · updated August 28, 2026. Loan amounts up to $5,000,000, larger by exception. Ground-up construction up to 90% of cost for builders with three or more completed projects, to 10 units. Figures are outer bounds, not offers; Lendmire is a mortgage broker, not a lender.
Business-purpose financing available in 40 markets, including Washington, D.C. In Union City, Census estimates put the population near 67,464, the median owner-occupied value around $1.10M, median gross rent near $2,713, and renters in about 35.3% of households — market context for a hard money file, not project underwriting.
What a Union City hard money loan is — and how the approval works.
A hard money loan is short-term, business-purpose financing secured by non-owner-occupied real estate. The lender does not lead with personal-income calculations; it leads with the property, the purchase price, the budget, the after-repair value, and the exit, then weighs the investor’s documented experience.
The asset and the plan lead the analysis
The central questions are what the property is worth today, what it will be worth once the work is complete, and whether the budget and timeline get it there. The stronger that story, the more leverage may be available.
Leverage is tiered by documented experience
Documented completed projects are what move an investor up the leverage tiers; a first project qualifies at a lower tier rather than being turned away. The snapshot above shows where every tier sits today.
Rehab funds in draws, not at closing
The rehab portion pays out as work is finished and inspected, not at the closing table. That is why the budget, the scope, the contractor, and the draw schedule are in the file from the beginning.
The exit is underwritten alongside the loan
A sale or a refinance into long-term financing repays the note, and lenders look for that path before closing. Mapping the refinance early is where a broker who works both products earns the fee.
Total project cost generally means the purchase price plus the rehab or build budget. Loan-to-cost is limited by the investor’s experience tier, with every tier also capped as a share of the after-repair value. The live program cards above carry the current ceilings, and the calculator below models your own Union City project. The lender sets the final numbers from the appraisal, the scope of work, and the complete file.
One city, several distinct project types.
In Union City, established neighborhoods, newer subdivisions, workforce housing, and blocks with older housing stock each generate renovation demand. Every project type carries its own purchase, rehab, resale, and refinance considerations.
Citywide figures are market context, not project-level underwriting. The lender still evaluates the subject property’s purchase price, scope of work, after-repair value, exit, and program eligibility.
Data source: U.S. Census Bureau QuickFacts — Union City, ACS 5-Year 2020–2024: total population, renter-occupied share of occupied housing units, median value of owner-occupied housing units, and median gross rent.
Distinct Union City submarkets, distinct project considerations.
Hard money lenders in Union City, CA underwrite very different projects across the city — cosmetic flips, full renovations, small multifamily repositions, and new construction. Purchase prices, renovation scope, resale depth, and refinance demand all shape each file.
Older Housing Stock
In Union City’s older housing stock, projects go past cosmetics into roofs, systems, and structure, so the budget and contingency are reviewed line by line and draws follow inspected work. Renovated comparables nearby carry the after-repair value.
The Rental Refinance Exit
A steady Union City strategy is buy, renovate, rent, refinance — hard money for the purchase and work, then a DSCR loan on the leased property. Lendmire arranges both, so the refinance is planned before the note is funded.
The Urban Core
Where Union City concentrates density, hard money projects run to condominiums, townhomes, and attached stock. Association documents, master insurance, and rental rules come into the file with the scope of work, and the resale depth that makes the exit easy also makes the comparable sales unforgiving.
Small Multifamily
Because many Union City households rent, two-to-four-unit repositions have a built-in exit here: stabilize the building on hard money, turn the units, then refinance into DSCR financing on the improved rents.
Workforce Single-Family
In Union City’s workforce single-family blocks, purchase and rehab budgets stay manageable and a finished house can sell to an owner-occupant or refinance into rental financing. Lenders focus on whether nearby sales support the after-repair value.
The Suburban Ring
Around Union City, the suburban ring trades in single-family homes bought by owner-occupants at resale, so full renovations with a clear resale exit are the typical hard money project. Bridge purchases work here too when the house needs time rather than work.
Lendmire can review eligible investment-property projects throughout the Union City area as well, from the core to the surrounding towns. Availability remains subject to the property, the program, and the current lending footprint.
What it looks like in this market.
Three composite projects drawn from how investors actually buy, renovate, and refinance here — each mapped to the leverage tier and exit that fits it.
High-value renovation, larger loan
At the top of the Union City market, a substantial renovation is underwritten on the experienced investor’s tier and a closely supported after-repair value, with the resale exit defined before closing.
Fit: experienced tier · larger loan sizes
Infill construction, builder tier
A Union City infill build: land plus construction budget on one loan, leverage set by the builder’s completed projects and capped against the completed value, draws against inspected progress, and a resale or rental-refinance exit.
Fit: construction · completed-value cap
First flip, cosmetic scope
A first Union City project: a dated single-family purchase with a cosmetic budget, one loan for purchase and rehab at the first experience tier, draws released as work is inspected, and a resale to an owner-occupant at the accepted after-repair value.
Fit: purchase plus rehab · first-tier leverage
Four ways Union City investors can use hard money.
Eligible Union City investment properties can take several transaction paths. Which structure fits depends on the project, the after-repair value, the investor’s experience, credit, reserves, and current lender guidelines.
Fix-and-flip loans
One loan covers the purchase and the rehab budget, with the rehab funded in draws against completed work. The investor’s experience tier sets the leverage, capped against the after-repair value.
Bridge purchase loans
For a Union City property that is not yet conventional-ready because of vacancy, condition, or timing, a bridge loan closes it at the bridge ceiling and a refinance into long-term financing repays the note once it is stabilized.
Cash-out and refinance
Draw equity out of a free-and-clear or low-leverage investment property to fund the next acquisition or rehab, up to the cash-out ceiling in the current snapshot, with the exit underwritten alongside the loan.
Ground-up construction
Ground-up residential construction up to the unit count in the snapshot, with leverage tiered by the builder’s completed projects and capped against the completed value, and the build budget funded in draws.
Model a Union City project before requesting a quote.
The calculator opens with editable Union City sample assumptions for purchase price, rehab budget, and after-repair value. Leverage tiers refresh from Lendmire’s centralized hard money standards source. Every field is editable, and the result is a leverage estimate, not a loan offer.
Union City hard money calculator
Type in the purchase price, the rehab or build budget, and the after-repair value you expect the appraisal to support. What comes back is the estimated maximum loan at the selected experience tier, before closing costs and reserves.
Leverage tiers displayed here are the current program ceilings drawn from Lendmire’s centralized hard money standards source.
Illustrative Union City starting assumptions are derived from the citywide median owner-occupied housing value. All fields are editable.
This is an illustrative leverage estimate, not a cost quote or a loan offer. The ceilings are outer bounds tiered by documented experience; the actual loan amount, draw schedule, reserves, and eligibility are set by the appraisal, the scope of work, and complete underwriting by the selected lender.
What lenders still review after the leverage math.
Leverage gets the attention, but the loan-to-cost ceiling is only one part of the file. A complete Union City hard money review also takes in the investor’s track record and liquidity, the property’s current and after-repair value, the scope of work, and the exit.
Same investment property, different point in its life.
Short-term and asset-based. The lender underwrites the purchase, the budget, the after-repair value, and the exit, sets leverage by documented experience, and funds the rehab in draws. Designed for property that is not yet stabilized.
Long-term and cash-flow-based. Once the property is renovated and rented, a DSCR loan qualifies on the rental income relative to the monthly payment — the typical take-out for a completed Union City hard money project.
Many Union City projects run on both products — hard money to buy and renovate, then a DSCR refinance on the stabilized rent roll. Since Lendmire arranges both, the exit is planned before the first draw is funded.
What to prepare for a Union City hard money review.
The exact list varies, but these four categories are a practical starting point for an investor before requesting a project-specific quote.
This is a general preparation guide, not a universal document checklist. The selected lender may request additional information based on the property, borrower, entity, project, and underwriting findings.
Local details that can change the leverage decision.
Costs, property characteristics, and project logistics particular to Union City can materially change a hard money result or a property’s eligibility. Go through the practical issues below before relying on a target leverage or a projected after-repair value.
Use these checks to keep the Union City file clean and fundable.
Because treatment differs by lending partner, this is not a promise of a universal outcome; it spotlights the main issues an investor should settle before closing.
After-repair value support
Leverage is capped against the after-repair value the lender accepts — from an appraisal or valuation and recent comparable sales, never from the investor’s number. An optimistic projection is the most common reason a Union City loan closes smaller than expected.
Scope, budget, and draw inspections
A line-item scope of work with a contingency, a contractor, and a realistic timeline sets the draw schedule. Draws are released against completed, inspected work, so a thin budget or a missing permit stalls the project rather than the paperwork.
Coastal insurance, flood, and wind
Coastal Union City projects add wind and flood exposure to the builder’s-risk or vacant-property coverage the lender requires. Premiums, deductibles, and availability change the carrying-cost budget and can affect the rental refinance that repays the note, so settle the insurance picture before closing.
Entity vesting and title
Business-purpose loans are commonly vested in an LLC or other entity, with personal guarantees from the members. Formation documents, ownership information, and clean title should be in hand before closing so the entity does not become the reason a closing slips.
The exit and the timeline
Hard money is short-term, so the sale or refinance that repays it has to land inside the term. For a Union City property that will be rented, planning the DSCR refinance at the start — seasoning, rent support, leverage — keeps the exit from becoming a scramble when the note comes due.
From a Union City project to closing.
Begin with the property and the plan, compare the available structures, document the project, and move through underwriting toward closing and the exit.
Run the project
Provide the Union City property details, purchase price, budget, after-repair value, experience, credit range, and timing.
Compare partners
Lendmire reviews multiple hard money and private money options for leverage, draw process, experience fit, and property appetite.
Document the project
Assemble the appraisal or valuation, scope of work, contractor, insurance, title, entity, and asset documentation the lender requires.
Close and exit
Finalize the structure, fund the purchase, draw against completed work, and execute the sale or the refinance on schedule.
A brokerage built around investor projects.
From a first cosmetic flip to ground-up construction and multi-property portfolios, Union City projects vary widely — and they do not all belong with the same lender.
Partner comparison
Lendmire can compare multiple hard money and private money partners rather than forcing every Union City project into one lender’s leverage box.
Investor specialization
The review focuses on leverage, experience tiers, draw mechanics, entity vesting, reserves, property type, and the exit strategy.
The exit, planned early
Because Lendmire also arranges DSCR financing, the refinance that repays the hard money note can be planned before the first draw is funded.
Trusted by buyers & investors alike.
Union City hard money loan FAQs
These answers address the purchase, rehab, construction, entity, leverage, and exit questions Union City investors commonly raise. Final program terms remain project-specific.
Can I use a hard money loan to buy a Union City fix-and-flip property?
Yes — eligible Union City investment properties can be purchased and renovated with a hard money loan through select lending partners. The purchase and the rehab budget close as one loan, the rehab funds in draws against completed work, and leverage is tiered by documented experience and capped against the after-repair value shown in the current snapshot.
Do I need experience to get a hard money loan in Union City?
No — first-time investors are eligible. Leverage is tiered by documented completed projects, so a first project qualifies at a lower tier than an investor with a longer record. The current snapshot shows where each tier sits today, and the calculator lets you model a Union City project at your own tier.
How do I compare hard money lenders in Union City, CA?
Compare them on the things that change your outcome: the leverage tier your experience actually qualifies for, how rehab draws are inspected and released, how the after-repair value is established, which property types and Union City markets they accept, and how the exit is treated. Lendmire compares multiple hard money and private money partners on exactly those factors before a file is placed.
What is the exit on a Union City hard money loan?
Either a sale after the renovation or a refinance into long-term financing — for a rented property, usually a DSCR loan that qualifies on the rental income. Lenders want that path visible before closing, and because Lendmire arranges DSCR financing as well, the Union City refinance can be planned alongside the hard money loan.
Can hard money fund ground-up construction in Union City?
Yes — eligible ground-up residential projects in Union City can be financed up to the unit count shown in the snapshot, with leverage tiered by the builder’s completed projects and capped against the completed value. Plans, budget, builder information, and the exit are reviewed alongside the land value.
Does coastal insurance affect a Union City hard money project?
It can — wind, flood, and builder’s-risk coverage on a coastal Union City property raise carrying costs and can change the exit, particularly when the take-out is a rental refinance. Lenders want that insurance picture settled before closing, not uncovered mid-project.
How long is a hard money loan?
Hard money runs on the short term range shown in the current snapshot, interest-only for the term and without a prepayment penalty on the current program. It is designed to be repaid by the exit, a sale or a refinance, inside that window.
How are rehab draws funded?
The rehab portion of the loan is held back at closing and released against completed work, usually after an inspection or documented progress. The draw schedule is agreed up front from the scope of work, which is why a line-item budget and a contractor are part of the file from the start.
Can I close a Union City hard money loan in an LLC?
Yes — business-purpose hard money loans are commonly vested in an LLC, corporation, or partnership, and individual investors are eligible as well. Formation documents, ownership information, and personal guarantees are typically part of the file, and the closing team confirms the Union City title and entity requirements.
Does the after-repair value come from my estimate?
No. The lender establishes the after-repair value from an appraisal or valuation and comparable sales, not from the investor’s projection. Your estimate should be built the same way — recent, nearby, comparable sales — because every leverage tier is capped against the value the lender accepts.
Bring the Union City project. We will help structure the financing.
Bring a fix-and-flip, bridge purchase, cash-out, or ground-up construction scenario; an initial review requires no credit pull and no commitment.
This page is Union City-specific — for guidelines and scenarios statewide, visit Hard Money Loans in California within Lendmire’s hard money loan program.
Also in Union City: DSCR Loans in Union City, CA