Current conventional guidelines, updated from one source.
One guideline source feeds every number here, and the page updates when the source does. These are purchase and refinance parameters; the leverage table underneath covers occupancy by occupancy, and the status lines cover insurance, gifts, and the first-time-buyer programs.
First-time buyer; 5% standard; 97% loan-to-value at the top
3% down is the first-time buyer’s entry point and 5% the standard one, both on a one-unit principal residence; second homes, two- to four-unit homes, and investment properties carry their own leverage limits, listed in the table below.
Priced on the score; no agency minimum with an automated approval
A 620 decision score opens the program on the wholesale side; the agencies set no minimum for an automated approval and 620 to 640 for manual underwriting by loan type. The strongest effect of the score is on cost, through loan-level adjustments and the mortgage insurance premium.
Required above 80% LTV; removed at 80% by request, 78% automatically
Above 80% loan-to-value the loan carries private mortgage insurance; at or below it, none. The insurance cancels on request at 80% of the original value and automatically at 78%, which is the single largest structural difference from FHA, whose premium at full leverage lasts for the term.
With an automated approval; 36% to 45% on a manual file
Total debt against gross income, up to 50% on an automated approval and 36% to 45% on a manual file. The housing payment counted includes the mortgage insurance while it applies, which is why cancellation changes the ratio as well as the payment.
| Purpose | Occupancy and program | Maximum LTV |
|---|---|---|
| Purchase | One-unit principal residence, first-time buyer (fixed rate) | 97% |
| Purchase | One-unit principal residence, standard | 95% |
| Purchase | HomeReady / Home Possible (income limits apply) | 97% |
| Purchase | Two- to four-unit principal residence | 95% |
| Purchase | Second home | 90% |
| Purchase | Investment property, one unit | 85% |
| Purchase | Investment property, two to four units | 75% |
| Refinance | Limited cash-out (rate-and-term), one-unit principal residence | 95% |
| Refinance | Cash-out, one-unit principal residence | 80% |
| Refinance | Cash-out, two to four units, second home or investment | 75% |
| Combined LTV | Maximum contribution |
|---|---|
| above 90 percent | 3% of the sales price |
| 75.01 to 90 percent | 6% of the sales price |
| 75 percent or less | 9% of the sales price |
| investment property (any) | 2% of the sales price |
| Event | Waiting period |
|---|---|
| Chapter 7 or 11 bankruptcy | four years from discharge or dismissal (two years with documented extenuating circumstances) |
| Chapter 13 bankruptcy | two years from discharge; four years from dismissal (two with extenuating circumstances) |
| Multiple bankruptcy filings | five years when more than one filing within the past seven years |
| Foreclosure | seven years (three with extenuating circumstances, then limited to a principal residence or second home at 90 percent LTV, purchase or limited cash-out) |
| Deed-in-lieu, short sale or mortgage charge-off | four years (two with extenuating circumstances) |
Mortgage insurance: Fannie Mae reports that private mortgage insurance typically ranged from 0.58%–1.86% of the loan amount a year; the premium on a specific loan is priced by the insurer on the score, the leverage, and the coverage, and is never quoted here. Gifts from relatives may fund the entire down payment on a one-unit principal residence. HomeReady and Home Possible lend to 97% with income at or below 80% of the area median; HomeOne lends to the same leverage with a first-time buyer and no income limit.
Current conventional snapshot · updated October 1, 2026 · principal residences occupied within sixty days, second homes, and one- to four-unit investment properties · conforming limits apply by county and are confirmed by a Lendmire loan officer · above the limit, see the jumbo program · no prepayment penalty · Lendmire is a broker, never the lender.
This page describes program parameters, not an offer. The down payment minimums, the credit floor, the insurance thresholds, and the ratios are agency guidelines and lender overlays, subject to change without notice and to full underwriting; the appraisal, the credit report, the property, the occupancy, and the conforming limit decide every file. Lendmire is a broker, not a lender. Licensed in sixteen states for consumer mortgages. NMLS #2371349.
What a conventional loan is — and how the file is qualified.
Every Kent conventional file is read by an automated underwriting system against the agencies’ guides. The system does not change the rules below; it applies them: how much leverage the occupancy allows, how the score is read, when mortgage insurance attaches and ends, and what the ratios and reserves must show.
For the program overview, see Lendmire’s conventional loan program, or the statewide guide at Conventional Loans in Washington; for the mortgage insurance cancellation rules, see the CFPB.
Leverage by occupancy and buyer
The agencies lend most on a home the borrower lives in and less as the occupancy changes: a one-unit principal residence reaches the top leverage, with the first-time buyer’s minimum the lowest down payment in the program; two- to four-unit homes, second homes, and investment properties step down from there, as the table in the snapshot shows for a Kent buyer.
Credit scores and automated underwriting
The automated system, DU on the Fannie Mae side and LPA on the Freddie Mac side, reads the whole credit file rather than a single number: the score, the depth of history, the recent events, and the seasoning after any derogatory event. The score it uses with more than one borrower is the average of the median scores.
Mortgage insurance that cancels
Twenty percent down means no mortgage insurance at all, and anything less means insurance for a while. The calculator on this page shows the Kent payment with the estimated premium and the payment after it ends, along with the month on the amortization schedule when the request and automatic thresholds arrive.
Ratios, reserves, and the DU finding
Total debt-to-income is the ratio that counts: the full housing payment, insurance included, plus every monthly obligation, against gross income. Automated approvals reach the higher ceiling in the snapshot; manual files are held to the lower pair, with the higher of the two needing the matrix’s credit and reserve criteria.
Every input below is yours: the Kent price, the down payment, the buyer type, the term, the rate, the insurance estimate, and the escrows. The thresholds and the ratio ceiling come from the program; the payment, the insurance, and the cancellation month follow from the arithmetic.
Where Kent buyers borrow — and how a conforming loan fits.
These numbers are Kent’s, not any one borrower’s: owner households, median home value, and household income from the U.S. Census Bureau. They give the scale of a typical purchase here; the score, the appraisal, and the household’s own income give the loan.
Citywide figures provide general market context, not an appraisal or an income calculation. Higher values mean a larger down payment in dollars and a larger insurance premium; lower values mean a payment that leaves more room under the ratio ceiling. The percentages do not move; what they amount to does.
Data sources: U.S. Census Bureau — ACS 5-Year (2024) housing and population estimates, including tenure, home values, gross rents, and household income.
Distinct Kent neighborhoods, distinct conventional files.
Six Kent neighborhoods, six versions of the same program: the cards below describe the housing stock, the price range, and the conventional question that comes up most often in each.
Higher-value homes
The higher-value Kent file is a limit question, not an eligibility question. The conforming limit caps the loan amount, and the buyer either adds down payment to fit under it or chooses the jumbo route for the whole purchase. Roughly 26,961 Kent households own their homes on the latest Census estimate — 57% of all households, the pool a conventional purchase joins.
Two-to-four-unit homes
The owner-occupied multi-unit Kent file is a conventional specialty with its own leverage, its own rent-counting rules, and its own reserve requirement. The buyer in one unit qualifies on the combined picture. On a home at Kent’s median value, the first-time buyer’s minimum down payment comes to about $17,600 and the standard minimum to about $29,400 — before closing costs, and before the mortgage insurance that comes with either.
Newer infill and recent construction
On recent construction in Kent the appraisal is usually uneventful and the arithmetic decides: whether the loan fits under the conforming limit, and whether the ratio carries the price once the insurance is added at the leverage chosen. The median owner-occupied home value in Kent runs near $587,800 on the latest Census estimate.
Condominiums and townhomes
A Kent condominium near the job is a conventional file with the project review added. Established projects usually pass; new or investor-heavy ones draw questions, and a project that fails goes to a portfolio lender on different terms. About 43% of Kent’s households rent — roughly 20,195 renter households on the latest Census estimate.
Established close-in neighborhoods
The Kent blocks nearest the core carry the oldest houses, and a conventional appraisal reads them for value first and condition second: no HUD or VA property standard, but the home must be safe, sound, and marketable, and a failing roof or system still draws a condition note. Kent counts a population near 136K within the Seattle-Tacoma-Bellevue, WA area.
Investor and second-home purchases
An investor buying a Kent unit to rent uses the conventional program at the investment leverage, documents the rent the agencies allow, and shows reserves for every financed property; the agencies cap how many such loans one borrower may carry. Median household income in Kent sits near $92,302 on the latest Census estimate.
Neighborhood sets the price, the property type, and often the occupancy; the agencies set the rest. The leverage table, the insurance thresholds, the ratio ceiling, and the waiting periods apply identically on every Kent file.
Four ways Kent buyers put a conforming loan to work.
Kent borrowers use conforming loans for reasons that repeat: the first purchase at the first-time-buyer minimum, the purchase with twenty percent down and no insurance, the second home or rental no government program will finance, and the refinance or cash-out on a home with equity.
Buy a second home
Conventional financing is the consumer program that reaches a second home: a Kent buyer brings the down payment the leverage table shows for that occupancy, qualifies on the full payment of both homes, and shows the reserves the finding requires. The home must be for the owner’s use, not a rental business.
Buy a condominium in a warrantable project
A Kent condominium is a conventional purchase when the project passes the agencies’ review: owner-occupancy mix, budget and reserves, litigation, commercial space, and ownership concentration. The dues enter the ratio, and the leverage follows the occupancy as it would on a house.
Refinance or take cash out
The conventional refinance fits a Kent owner who wants a different term, a different structure, or cash from equity; each has its own leverage, and a cash-out refinance generally needs six months of ownership. A home equity line that leaves the first mortgage alone is the comparison worth running.
Buy an investment property
Investment property on a conforming loan is a common entry point for Kent landlords: one to four units, a down payment set by the leverage table, rental income counted under the agencies’ rules, and a cap on how many financed properties one borrower may hold.
Estimate the payment on a Kent price before requesting a quote.
Enter a Kent price, the down payment, and the buyer type, choose a term, and the calculator returns the loan and its loan-to-value, principal and interest, the estimated mortgage insurance while the loan is above the threshold, taxes and insurance, the payment after the insurance ends, and the ratio if you enter income. It also shows the month the balance reaches the cancellation thresholds. The rate field holds the weekly Freddie Mac benchmark as a market reference, never a quote.
Kent conventional payment estimate
Defaults describe Kent, not your purchase: put in the real price, the real down payment, and the real escrows.
Editable benchmark: 7.03% as of September 24, 2026 · Freddie Mac 30-year average via FRED®. A conventional market reference, not a conventional loan quote.
Estimate seeded at the low end of Fannie Mae’s published range (0.58%–1.86% a year); the insurer prices the actual premium on the score and the leverage. Applies only above 80% loan-to-value.
Illustrative starting assumptions: a $590,000 price near Kent’s median owner-occupied home value, the first-time buyer’s minimum down payment, a thirty-year term at the current Freddie Mac benchmark, mortgage insurance at the low end of Fannie Mae’s published range, property taxes and insurance estimated for Washington (U.S. Census Bureau). Every field is editable.
Illustrative estimate only — not a Loan Estimate, approval, quote, or commitment to lend. The rate field carries the weekly Freddie Mac thirty-year conventional benchmark, a market reference and not a conventional loan quote; your rate is set by the lender at lock. The mortgage insurance figure is an editable estimate seeded from Fannie Mae’s published typical range, not a premium quote; the insurer prices the actual premium, and the cancellation month assumes scheduled payments with no extra principal and no change in value. Taxes, insurance and dues are editable estimates; closing costs are not included. Conforming loan limits apply by county. Licensed in sixteen states for consumer mortgages.
Same buyer, three very different closings.
The alternatives put the conventional loan’s cost in perspective: FHA charges a premium every month and an upfront premium at closing, VA charges a one-time fee, conventional charges a premium only until equity arrives. The comparison below is written for a Kent buyer weighing all three.
Conventional, FHA, or VA.
A low down payment for the first-time buyer, insurance priced on the score and removed once the balance falls below the threshold, no upfront premium, and, of the three programs compared here, the one that finances second homes and investment property. The cost is a credit standard that prices a weak score heavily.
Where conventional prices the score, FHA prices by schedule. FHA fits the buyer whose score would be priced heavily on a conventional loan, or who needs the ratio ladder’s room; it rarely wins for a Kent buyer with strong credit and a down payment above the minimum. See Lendmire’s FHA loan program.
For an eligible veteran, service member, or surviving spouse, the VA loan removes the down payment and the monthly insurance entirely in exchange for a one-time funding fee that many disabled veterans do not pay. Where eligibility exists, it usually beats conventional for a Kent principal residence; conventional still wins the second home and the rental. See Lendmire’s VA loan program.
The decision is rarely close once the profile is known. Conventional tends to win the strong score and every non-primary occupancy, FHA the modest score, and VA nearly any eligible principal residence. The comparison is run on the actual numbers, in writing. Above the conforming limit, see the jumbo loan program.
What to prepare for a Kent scenario review.
What a lender reads on a Kent conventional loan, and what you can have ready before anyone asks.
This is a general preparation guide, not a universal checklist. The selected lender may request additional information based on the transaction, the property, the automated underwriting finding, and the income picture. Nothing here is legal or tax advice.
Local details that can change the loan.
The percentages tell only part of the story. What a Kent conventional loan actually becomes depends on the score, the appraisal, the project review, and the automated finding, and these are the details that move it.
Use these checks to keep the Kent file clean and fundable.
Before asking for a quote, know three answers: how much insurance the leverage carries and for how long, what the score does to the price, and whether the property and the loan amount fit the conforming program.
- Plan the insurance: it cancels on request at the request threshold and automatically at the termination threshold.
- Confirm the score: a self-pulled score can differ from the decision score.
- Check the limit: ask a loan officer for the current figure in the county.
Mortgage insurance: how much, and until when
The premium on a Kent loan can be paid monthly, by the lender in exchange for a different price, as a single premium at closing, or split; the monthly structure cancels under the federal rules, and the others are priced by the lender. The calculator shows the monthly structure and the month the thresholds arrive on scheduled payments.
The score sets the cost
The decision score is read from the lender’s report, and with more than one borrower the automated system uses the average of the median scores. On a Kent conventional file the score rarely ends eligibility, but it sets the loan-level adjustments and the insurance premium, so a difference of a few points can change the monthly cost.
The conforming limit
Conforming loans are capped by county and by unit count, with higher limits in high-cost areas, and the figures are reset each year by the FHFA. A Kent purchase whose loan would run above the limit either brings a larger down payment to fit under it or moves to the jumbo program; a Lendmire loan officer confirms the current limit for the county.
Seller contributions and the down payment
Two rules shape the Kent contract: the contribution cap, which falls as the leverage rises, and the source rules for the down payment, which allow a full gift on a one-unit principal residence and require a share of the buyer’s own funds on second homes and multi-unit homes above the threshold.
Waiting periods after a credit event
A documented hardship beyond the borrower’s control, such as a job loss or a medical event, can shorten several of the waiting periods, and the shortened foreclosure period limits the leverage and the occupancy. A Kent file inside a waiting period is written later, not now.
From a Kent pre-approval to keys in hand.
A conventional purchase runs in a fixed order: pre-approval through the automated system on the score, the ratio, and the reserves; contract and appraisal or value acceptance; underwriting that verifies what the finding assumed; and closing with the insurance structure set. Here is that order for a Kent buyer.
Pre-approval
The first conversation settles the shape: whether the buyer counts as a first-time buyer, what leverage the occupancy allows, how much insurance the down payment carries, and whether conventional is the right program next to FHA and VA for the Kent purchase.
Contract and appraisal
The appraisal is a valuation first and a condition report second on a conventional file; a short value re-sizes the loan, and the Kent contract is adjusted or released under its contingency. Where the system offers value acceptance, the step collapses to the system’s figure.
Underwriting
Underwriting on a Kent conventional file is a verification of the finding: the documents behind the income and assets, the source of the down payment, the project review, and the insurance commitment for the leverage. Conditions are cleared and the approval is issued with its terms.
Closing
Closing is where the structure becomes a payment: principal and interest, the insurance while the loan is above the threshold, taxes and insurance. The Kent buyer takes the keys, and the lender delivers the loan to the agency it was written for.
A brokerage that prices the whole market.
Lendmire is a mortgage brokerage licensed for consumer lending in sixteen states, and on a conventional loan that buys three things: the file priced across several wholesale programs rather than one, the insurance structure and its exit explained before an offer is written, and the terms in writing from a licensed loan officer.
Several programs, one set of numbers
Before any recommendation, the Kent file is priced across the wholesale programs Lendmire works with and run against FHA and VA on the same price, score, and down payment. The buyer sees the payment, the insurance line, and the cash to close for each, and the choice follows the figures.
The insurance explained before the offer
No Kent buyer should learn at the closing table what the insurance costs or how long it lasts. The loan officer walks through the premium for the leverage chosen, the month the thresholds arrive on scheduled payments, and the alternative of a larger down payment.
Licensed, consumer-purpose, in writing
What this page shows are the agencies’ parameters and the wholesale overlays; what a specific Kent loan gets is a written set of terms from a licensed loan officer after the review. Lendmire is a broker, never the lender.
Trusted by buyers & families alike.
Kent conventional loan FAQs
What a conventional loan is, how much it takes to buy, what score it needs, how the mortgage insurance works and ends, and how the conforming limit works, answered for Kent buyers.
What is a conventional loan, and who is it for?
A conventional loan is the mortgage a Kent buyer with good credit should compare first: a low down payment for the first-time buyer, insurance that cancels, no upfront premium, and the breadth to finance a second home or a rental under the same rules.
How much do I need to put down on a conventional loan in Kent?
The first-time buyer’s minimum in the snapshot on a one-unit principal residence with a fixed rate, where a first-time buyer is anyone without an ownership interest in a home during the prior three years; the standard minimum for everyone else; and more for second homes, multi-unit homes, and investment property, as the leverage table shows. A relative’s gift may fund the whole down payment on a one-unit principal residence.
What credit score do I need for a conventional loan?
The floor in the snapshot opens the program; the score above it sets the cost. With more than one borrower the automated system uses the average of the median scores, and a Kent buyer close to a cost tier may gain from a short wait and a paid-down balance.
How does private mortgage insurance work, and when does it end?
Three dates matter: the month the balance reaches the request threshold, when the borrower can ask the servicer to drop the premium with a good payment history; the month it reaches the termination threshold, when the servicer must drop it; and the midpoint of the term, the final backstop. Twenty percent down means none of this applies.
What is the conforming loan limit in Kent?
The limit is the first thing confirmed on a Kent file near the top of the market. These pages state the program’s structure rather than a number that changes every year; the current figure comes from a loan officer.
What debt-to-income ratio does a conventional loan allow?
The automated maximum is in the snapshot, and the finding is what grants it. A strong score and documented reserves earn the full room; a thinner profile earns less, and a manual file is held to the lower ratios.
Is a conventional loan assumable?
Not the fixed-rate loan. Some conventional ARMs permit assumption, and the note says which. A Kent owner thinking about selling into a higher-rate market should know the loan does not transfer.
How does a conventional refinance work?
Rate-and-term to the higher limit, cash-out to the lower one, on a principal residence, second home, or rental at each occupancy’s leverage. A Kent owner carrying mortgage insurance may also refinance into a loan at or below the threshold and leave the insurance behind.
What are HomeReady, Home Possible, and HomeOne?
They are the agencies’ affordable programs: the same conforming loan with the top leverage, lower insurance coverage, and in two cases an income limit. A Kent buyer who qualifies usually pays less than on the standard conventional structure at the same leverage.
Can I buy a second home with a conventional loan?
Conventional financing reaches second homes where the government programs stop. The leverage is lower than on a principal residence, the reserves are higher, and the rest of the file is standard.
A Kent conventional loan sized to the price, the score, and the leverage.
When you are ready, a Kent review sizes the loan, settles the program and the insurance structure, and produces written terms. Nothing on this page commits anyone to lend.
This guide covers Kent — for the statewide guidelines, markets, and scenarios, see Conventional Loans in Washington, part of Lendmire’s conventional loan program.
Nearby markets in Washington: Bellevue · Tacoma · Seattle · Vancouver · Spokane
Related programs: FHA Loans · Jumbo Loans · Refinance Loans