Current conventional guidelines, updated from one source.
Four cards and three tables carry every figure a conventional file turns on, drawn from one source built on the agencies’ published guides: down payment, credit, mortgage insurance, ratios, then the leverage by occupancy, the seller-contribution caps, and the waiting periods after a credit event.
First-time buyer; 5% standard; 97% loan-to-value at the top
On a principal residence the down payment starts at 3% for a first-time buyer and 5% otherwise, the top leverage being 97% loan-to-value. Second homes and investment properties ask for more, as the leverage table shows, and the price of any leverage above 80% is mortgage insurance.
Priced on the score; no agency minimum with an automated approval
A 620 decision score opens the program on the wholesale side; the agencies set no minimum for an automated approval and 620 to 640 for manual underwriting by loan type. The strongest effect of the score is on cost, through loan-level adjustments and the mortgage insurance premium.
Required above 80% LTV; removed at 80% by request, 78% automatically
Private mortgage insurance applies above 80% loan-to-value, costs within a published range of 0.58%–1.86% a year depending on the score and the leverage, and ends: by request at 80% of the original value, automatically at 78%, and no later than the midpoint of the term.
With an automated approval; 36% to 45% on a manual file
50% is the ceiling for a file the automated system approves. Manual underwriting caps the ratio at 36% to 45% depending on the score and the reserves, and the automated finding also sets the reserves the file must show.
| Purpose | Occupancy and program | Maximum LTV |
|---|---|---|
| Purchase | One-unit principal residence, first-time buyer (fixed rate) | 97% |
| Purchase | One-unit principal residence, standard | 95% |
| Purchase | HomeReady / Home Possible (income limits apply) | 97% |
| Purchase | Two- to four-unit principal residence | 95% |
| Purchase | Second home | 90% |
| Purchase | Investment property, one unit | 85% |
| Purchase | Investment property, two to four units | 75% |
| Refinance | Limited cash-out (rate-and-term), one-unit principal residence | 95% |
| Refinance | Cash-out, one-unit principal residence | 80% |
| Refinance | Cash-out, two to four units, second home or investment | 75% |
| Combined LTV | Maximum contribution |
|---|---|
| above 90 percent | 3% of the sales price |
| 75.01 to 90 percent | 6% of the sales price |
| 75 percent or less | 9% of the sales price |
| investment property (any) | 2% of the sales price |
| Event | Waiting period |
|---|---|
| Chapter 7 or 11 bankruptcy | four years from discharge or dismissal (two years with documented extenuating circumstances) |
| Chapter 13 bankruptcy | two years from discharge; four years from dismissal (two with extenuating circumstances) |
| Multiple bankruptcy filings | five years when more than one filing within the past seven years |
| Foreclosure | seven years (three with extenuating circumstances, then limited to a principal residence or second home at 90 percent LTV, purchase or limited cash-out) |
| Deed-in-lieu, short sale or mortgage charge-off | four years (two with extenuating circumstances) |
Mortgage insurance: Fannie Mae reports that private mortgage insurance typically ranged from 0.58%–1.86% of the loan amount a year; the premium on a specific loan is priced by the insurer on the score, the leverage, and the coverage, and is never quoted here. Gifts from relatives may fund the entire down payment on a one-unit principal residence. HomeReady and Home Possible lend to 97% with income at or below 80% of the area median; HomeOne lends to the same leverage with a first-time buyer and no income limit.
Current conventional snapshot · updated October 1, 2026 · principal residences occupied within sixty days, second homes, and one- to four-unit investment properties · conforming limits apply by county and are confirmed by a Lendmire loan officer · above the limit, see the jumbo program · no prepayment penalty · Lendmire is a broker, never the lender.
For informational purposes only. This is not a commitment to lend or extend credit, an offer, or a quote. Program parameters shown are Fannie Mae and Freddie Mac guidelines and wholesale lender overlays, are subject to change without notice, and every figure depends on the borrower, the property, the occupancy, the automated underwriting finding, and full underwriting. Mortgage insurance figures are published typical ranges and editable estimates, not premium quotes. Conforming loan limits apply by county. Lendmire is a mortgage broker, not a lender. Licensed in sixteen states for consumer mortgages. NMLS #2371349.
What a conventional loan is — and how the file is qualified.
A conventional loan is a mortgage written to the rules of Fannie Mae and Freddie Mac so a lender can sell it to them after closing. Those rules decide the leverage by occupancy, the credit standard, the insurance above the threshold, and the ratios, and the four cards below take a Seattle file apart along exactly those lines.
For the program overview, see Lendmire’s conventional loan program, or the statewide guide at Conventional Loans in Washington; for the mortgage insurance cancellation rules, see the CFPB.
Leverage by occupancy and buyer
Who the buyer is matters as much as what the home is. A first-time buyer, meaning no ownership interest in a home for three years, qualifies for the smallest down payment on a principal residence; a repeat buyer starts a little higher; and HomeReady, Home Possible, and HomeOne open the top leverage to buyers who meet their conditions.
Credit scores and automated underwriting
Conventional credit is priced more than it is gated. The agencies set no minimum score for a loan their automated system approves, the wholesale programs set a floor, and above the floor the score sets the loan-level price adjustments and the mortgage insurance premium. A Seattle buyer with a stronger score pays less on both lines.
Mortgage insurance that cancels
The federal cancellation rules are the quiet advantage of a conventional loan. The borrower can ask to drop the insurance when the balance reaches the request threshold, the servicer must drop it at the automatic threshold, and it cannot outlast the midpoint of the term. On an FHA loan at full leverage the premium stays for the life of the loan.
Ratios, reserves, and the DU finding
Reserves are measured in months of the total housing payment and set by the finding, the occupancy, and the number of financed properties; a Seattle second-home or investment file carries more than a principal residence. Income needs a two-year history and a reasonable expectation of continuing.
None of this is a decision. The appraisal can come in under the price, the rate is set at lock, the premium is set by the insurer, and the automated finding sets the reserves. What stays fixed is the structure the calculator reproduces: price, down payment, leverage, insurance, payment.
Where Seattle buyers borrow — and how a conforming loan fits.
Conventional loans are sized against a local market, and these are Seattle’s numbers from the U.S. Census Bureau: how many households own, what a typical home is worth, and what households earn. Together they set the scale of a typical down payment, loan, and insurance premium.
These are context figures, not underwriting inputs. Read the figures as ranges, not predictions. The lender appraises one home, documents one income, and lets the automated system read one credit file.
Data sources: U.S. Census Bureau — ACS 5-Year (2024) housing and population estimates, including tenure, home values, gross rents, and household income.
Distinct Seattle neighborhoods, distinct conventional files.
Six Seattle neighborhoods, six versions of the same program: the cards below describe the housing stock, the price range, and the conventional question that comes up most often in each.
Condominiums and townhomes
A Seattle condominium near the job is a conventional file with the project review added. Established projects usually pass; new or investor-heavy ones draw questions, and a project that fails goes to a portfolio lender on different terms. About 56% of Seattle’s households rent — roughly 204,521 renter households on the latest Census estimate.
Higher-value homes
The higher-value Seattle file is a limit question, not an eligibility question. The conforming limit caps the loan amount, and the buyer either adds down payment to fit under it or chooses the jumbo route for the whole purchase. On a home at Seattle’s median value, the first-time buyer’s minimum down payment comes to about $28,200 and the standard minimum to about $46,900 — before closing costs, and before the mortgage insurance that comes with either.
Two-to-four-unit homes
Seattle duplexes and small apartment houses are conventional purchases at the multi-unit leverage in the snapshot when the buyer occupies one unit, with rent from the other units counted toward qualifying under the agencies’ rules. Roughly 158,945 Seattle households own their homes on the latest Census estimate — 44% of all households, the pool a conventional purchase joins.
Established close-in neighborhoods
An older Seattle house is a routine conventional purchase; the appraisal is lighter on condition than a government appraisal, which is one reason buyers of older homes often choose this program. The value against the contract price is the usual question. Median household income in Seattle sits near $123,860 on the latest Census estimate.
Newer infill and recent construction
New rows and recent infill in Seattle tend to appraise cleanly, which moves the question to the loan amount: a contract near the conforming limit is confirmed against the county figure before the offer, and a loan above it needs a larger down payment or the jumbo program. Seattle counts a population near 754K within the Seattle-Tacoma-Bellevue, WA area.
Investor and second-home purchases
An investor buying a Seattle unit to rent uses the conventional program at the investment leverage, documents the rent the agencies allow, and shows reserves for every financed property; the agencies cap how many such loans one borrower may carry. The median owner-occupied home value in Seattle runs near $938,600 on the latest Census estimate.
Each Seattle submarket has its own property story, and the appraisal and the project review are where that story is told. The leverage limits, the cancellation rules, and the automated finding are the constants.
Four ways Seattle buyers put a conforming loan to work.
The conventional loan is one of the broadest mortgage programs there is: it buys a first home with a small down payment, a move-up home with cancellable insurance, a second home, and a rental, and it refinances all of them. These are the four uses that bring Seattle borrowers to it most.
Buy an investment property
Investment property on a conforming loan is a common entry point for Seattle landlords: one to four units, a down payment set by the leverage table, rental income counted under the agencies’ rules, and a cap on how many financed properties one borrower may hold.
Refinance or take cash out
Refinancing on a conventional loan follows the same leverage table as buying: rate-and-term to the higher limit, cash-out to the lower one. A Seattle owner who has carried mortgage insurance may also use the refinance to leave it behind once the new loan sits at or below the threshold.
Buy with twenty percent down and no insurance
The move-up Seattle buyer selling one home and bringing twenty percent to the next usually lands here: no mortgage insurance, the strongest cost tier the score earns, and a loan the automated system approves on the equity brought forward.
Buy a condominium in a warrantable project
The condominium file adds the project review to the house file. Once a Seattle project clears it, the first-time buyer’s minimum, the insurance rules, and the ratio ceiling are exactly what they would be on a single-family home.
Estimate the payment on a Seattle price before requesting a quote.
Enter a Seattle price, the down payment, and the buyer type, choose a term, and the calculator returns the loan and its loan-to-value, principal and interest, the estimated mortgage insurance while the loan is above the threshold, taxes and insurance, the payment after the insurance ends, and the ratio if you enter income. It also shows the month the balance reaches the cancellation thresholds. The rate field holds the weekly Freddie Mac benchmark as a market reference, never a quote.
Seattle conventional payment estimate
Seeded at Seattle’s median value with the first-time buyer’s minimum down; every field updates the result as you type.
Editable benchmark: 7.03% as of September 24, 2026 · Freddie Mac 30-year average via FRED®. A conventional market reference, not a conventional loan quote.
Estimate seeded at the low end of Fannie Mae’s published range (0.58%–1.86% a year); the insurer prices the actual premium on the score and the leverage. Applies only above 80% loan-to-value.
Illustrative starting assumptions: a $750,000 price near Seattle’s median owner-occupied home value, the first-time buyer’s minimum down payment, a thirty-year term at the current Freddie Mac benchmark, mortgage insurance at the low end of Fannie Mae’s published range, property taxes and insurance estimated for Washington (U.S. Census Bureau). Every field is editable.
Illustrative estimate only — not a Loan Estimate, approval, quote, or commitment to lend. The rate field carries the weekly Freddie Mac thirty-year conventional benchmark, a market reference and not a conventional loan quote; your rate is set by the lender at lock. The mortgage insurance figure is an editable estimate seeded from Fannie Mae’s published typical range, not a premium quote; the insurer prices the actual premium, and the cancellation month assumes scheduled payments with no extra principal and no change in value. Taxes, insurance and dues are editable estimates; closing costs are not included. Conforming loan limits apply by county. Licensed in sixteen states for consumer mortgages.
Same buyer, three very different closings.
The alternatives put the conventional loan’s cost in perspective: FHA charges a premium every month and an upfront premium at closing, VA charges a one-time fee, conventional charges a premium only until equity arrives. The comparison below is written for a Seattle buyer weighing all three.
Conventional, FHA, or VA.
The program’s strengths are the cancellable insurance, the breadth of occupancies, and a cost structure that rewards a strong score; its weakness is the same structure applied to a weak one. A Seattle buyer with a strong score usually pays less each month here than on FHA.
FHA’s leverage is high and its credit standard is forgiving, but its insurance is priced by schedule rather than by score and does not cancel on a full-leverage thirty-year loan. A Seattle buyer comparing the two sees the premium line stay on FHA and disappear on conventional. See Lendmire’s FHA loan program.
VA beats conventional on the principal residence for nearly every eligible borrower; conventional beats VA on everything VA does not touch: second homes, rentals, and buyers without the certificate. The two often sit side by side in one Seattle household. See Lendmire’s VA loan program.
Choose by profile: a strong score and any down payment point to conventional; a modest score and a small down payment point to FHA; eligibility with full entitlement points to VA. A Seattle loan officer runs all three on the same numbers before recommending one. Above the conforming limit, see the jumbo loan program.
What to prepare for a Seattle scenario review.
Gather these before a Seattle review: the ordinary mortgage documents, plus the pieces that settle the first-time-buyer question and the occupancy.
This is a general preparation guide, not a universal checklist. The selected lender may request additional information based on the transaction, the property, the automated underwriting finding, and the income picture. Nothing here is legal or tax advice.
Local details that can change the loan.
What moves a Seattle file most often: the insurance and its cancellation, the score and the cost it sets, the appraisal, the condominium review, the conforming limit, the ratio and the reserves, the occupancy rule, and the seasoning after a credit event.
Use these checks to keep the Seattle file clean and fundable.
Three things to settle before a Seattle review: how the mortgage insurance will be structured and when it ends, where the decision score lands and what it prices, and whether the property has any agency question attached.
- Plan the insurance: it cancels on request at the request threshold and automatically at the termination threshold.
- Confirm the score: the score sets the loan-level adjustments and the insurance premium more than it gates the loan.
- Count the properties: each financed property adds reserves to the next file.
Mortgage insurance: how much, and until when
Cancellation on request needs a good payment history, no subordinate liens, and no decline in value; automatic termination needs only that the loan be current. A Seattle owner whose home has gained value may also ask the servicer to recognize the current value under its own rules, which is a servicer decision rather than a program right.
The score sets the cost
The score does two jobs on a Seattle file: it feeds the automated assessment alongside the rest of the credit file, and it sets the cost of the loan and the insurance. A buyer close to a cost tier sometimes gains more from a short wait and a paid-down balance than from any other change.
Second homes, rentals, and financed-property limits
A Seattle household can hold several conventional loans at once, but each financed property adds reserves to the next file and the agencies cap the number of financed properties a borrower may have. Second homes and rentals are leveraged lower than a principal residence and priced for the occupancy.
The conforming limit
Conforming loans are capped by county and by unit count, with higher limits in high-cost areas, and the figures are reset each year by the FHFA. A Seattle purchase whose loan would run above the limit either brings a larger down payment to fit under it or moves to the jumbo program; a Lendmire loan officer confirms the current limit for the county.
Seller contributions and the down payment
A Seattle contract can shift most closing costs to the seller inside the cap for the leverage, which leaves the buyer bringing the down payment and little else. On second homes and two- to four-unit homes above the threshold, part of the down payment must be the buyer’s own funds.
From a Seattle pre-approval to keys in hand.
From the first conversation to the closing table, a Seattle conventional purchase takes four steps, and each one carries an agency rule inside it.
Pre-approval
The first conversation settles the shape: whether the buyer counts as a first-time buyer, what leverage the occupancy allows, how much insurance the down payment carries, and whether conventional is the right program next to FHA and VA for the Seattle purchase.
Contract and appraisal
The appraisal is a valuation first and a condition report second on a conventional file; a short value re-sizes the loan, and the Seattle contract is adjusted or released under its contingency. Where the system offers value acceptance, the step collapses to the system’s figure.
Underwriting
Underwriting on a Seattle conventional file is a verification of the finding: the documents behind the income and assets, the source of the down payment, the project review, and the insurance commitment for the leverage. Conditions are cleared and the approval is issued with its terms.
Closing
Closing is where the structure becomes a payment: principal and interest, the insurance while the loan is above the threshold, taxes and insurance. The Seattle buyer takes the keys, and the lender delivers the loan to the agency it was written for.
A brokerage that prices the whole market.
A single lender prices a conventional loan one way; a brokerage with several wholesale programs prices it several ways and shows a Seattle buyer which one costs less on the same score and leverage, with the insurance quoted by the insurer rather than guessed.
Several programs, one set of numbers
Before any recommendation, the Seattle file is priced across the wholesale programs Lendmire works with and run against FHA and VA on the same price, score, and down payment. The buyer sees the payment, the insurance line, and the cash to close for each, and the choice follows the figures.
The insurance explained before the offer
The premium and its exit are decided by the leverage and the score, and a buyer should know both before signing a contract. Lendmire states the structure for the Seattle purchase, shows the payment before and after cancellation, and explains the request and automatic thresholds.
Licensed, consumer-purpose, in writing
Lendmire carries the license for the state the Seattle home is in, delivers the disclosures a consumer mortgage requires, and commits the terms to paper. The program figures on this page are read from one guideline source built on the agencies’ published guides.
Trusted by buyers & families alike.
Seattle conventional loan FAQs
What a conventional loan is, how much it takes to buy, what score it needs, how the mortgage insurance works and ends, and how the conforming limit works, answered for Seattle buyers.
What is a conventional loan, and who is it for?
The general-purpose mortgage: conforming to the agencies’ guides, priced on the credit score, insured privately only while the leverage is above the threshold. It is the program most Seattle buyers compare first and, of the three compared here, the one that reaches a second home or an investment property.
How much do I need to put down on a conventional loan in Seattle?
The snapshot shows the minimums: one for the first-time buyer, one for everyone else, both on a principal residence. The calculator applies either to a Seattle price, and the leverage table gives the figure for second homes and investment property.
What credit score do I need for a conventional loan?
The floor in the snapshot opens the program; the score above it sets the cost. With more than one borrower the automated system uses the average of the median scores, and a Seattle buyer close to a cost tier may gain from a short wait and a paid-down balance.
How does private mortgage insurance work, and when does it end?
Three dates matter: the month the balance reaches the request threshold, when the borrower can ask the servicer to drop the premium with a good payment history; the month it reaches the termination threshold, when the servicer must drop it; and the midpoint of the term, the final backstop. Twenty percent down means none of this applies.
What is the conforming loan limit in Seattle?
Conforming limits are set each year by the FHFA, by county and by unit count, with higher limits in high-cost areas, which is why this page does not quote a figure. A Lendmire loan officer confirms the current limit for the county where you are buying; a loan above it needs a larger down payment to fit under the limit or moves to the jumbo program.
What happens after my Seattle offer is accepted?
Your Seattle contract goes to the lender, the appraisal is ordered or waived, and underwriting follows. The usual detours are a value under the price or a condition on an older home; a loan officer keeps the timeline honest.
What does the appraisal check on a conventional loan?
Value first: the loan is sized on the lesser of the price and the appraised value. Condition second: there is no HUD or VA property standard, but the home must be safe, sound, and marketable, and findings on older homes are settled before closing. Where the automated system offers value acceptance or an appraisal waiver, no appraisal is ordered at all.
Should I choose a conventional loan or FHA?
Conventional tends to fit the buyer with a strong score, because its insurance cancels and carries no upfront premium; FHA tends to fit the buyer with a modest score, because its ratios stretch further. The answer for a Seattle buyer comes from the numbers, not the label.
Can the seller pay my closing costs on a conventional loan?
Up to the share of the price in the snapshot table for the combined loan-to-value. Anything above it reduces the price for sizing the loan, and nothing from the seller may fund the down payment.
Can I buy a rental property with a conventional loan?
Rentals of one to four units are eligible. The down payment is larger than on a home the buyer lives in, the finding sets the reserves, and the rental income enters the ratio under the agencies’ rules rather than in full.
A Seattle conventional loan sized to the price, the score, and the leverage.
When you are ready, a Seattle review sizes the loan, settles the program and the insurance structure, and produces written terms. Nothing on this page commits anyone to lend.
This guide covers Seattle — for the statewide guidelines, markets, and scenarios, see Conventional Loans in Washington, part of Lendmire’s conventional loan program.
Nearby markets in Washington: Bellevue · Kent · Tacoma · Vancouver · Spokane
Related programs: FHA Loans · Jumbo Loans · Refinance Loans