Current conventional guidelines, updated from one source.
Treat these as the program’s fixed points rather than an offer: the minimum down payment for a first-time buyer and for everyone else, the credit floor behind these pages, the leverage at which mortgage insurance begins and the points at which it ends, and the ratio an automated approval allows.
First-time buyer; 5% standard; 97% loan-to-value at the top
3% down is the first-time buyer’s entry point and 5% the standard one, both on a one-unit principal residence; second homes, two- to four-unit homes, and investment properties carry their own leverage limits, listed in the table below.
Priced on the score; no agency minimum with an automated approval
620 is the working floor, a wholesale overlay rather than an agency rule, since Fannie Mae requires no minimum score for a loan the automated system approves and 620 only on a manual fixed-rate file. Above the floor, each step up in score lowers the cost of the loan and of the insurance.
Required above 80% LTV; removed at 80% by request, 78% automatically
Private mortgage insurance applies above 80% loan-to-value. Fannie Mae’s 2022 figures put the annual cost in a range of 0.58%–1.86%, depending on the score and the leverage. It ends by request at 80% of the original value, automatically at 78%, and no later than the midpoint of the term.
With an automated approval; 36% to 45% on a manual file
Lenders compare total debt against gross income, with limits up to 50% on an automated approval and 36% to 45% on a manual file. The housing payment counted includes the mortgage insurance while it applies, which is why cancellation changes the ratio as well as the payment.
| Purpose | Occupancy and program | Maximum LTV |
|---|---|---|
| Purchase | One-unit principal residence, first-time buyer (fixed rate) | 97% |
| Purchase | One-unit principal residence, standard | 95% |
| Purchase | HomeReady / Home Possible (income limits apply) | 97% |
| Purchase | Two- to four-unit principal residence | 95% |
| Purchase | Second home | 90% |
| Purchase | Investment property, one unit | 85% |
| Purchase | Investment property, two to four units | 75% |
| Refinance | Limited cash-out (rate-and-term), one-unit principal residence | 95% |
| Refinance | Cash-out, one-unit principal residence | 80% |
| Refinance | Cash-out, two to four units, second home or investment | 75% |
| Combined LTV | Maximum contribution |
|---|---|
| above 90 percent | 3% of the sales price |
| 75.01 to 90 percent | 6% of the sales price |
| 75 percent or less | 9% of the sales price |
| investment property (any) | 2% of the sales price |
| Event | Waiting period |
|---|---|
| Chapter 7 or 11 bankruptcy | four years from discharge or dismissal (two years with documented extenuating circumstances) |
| Chapter 13 bankruptcy | two years from discharge; four years from dismissal (two with extenuating circumstances) |
| Multiple bankruptcy filings | five years when more than one filing within the past seven years |
| Foreclosure | seven years (three with extenuating circumstances, then limited to a principal residence or second home at 90 percent LTV, purchase or limited cash-out) |
| Deed-in-lieu, short sale or mortgage charge-off | four years (two with extenuating circumstances) |
Mortgage insurance: Fannie Mae reports that private mortgage insurance typically ranged from 0.58%–1.86% of the loan amount a year; the premium on a specific loan is priced by the insurer on the score, the leverage, and the coverage, and is never quoted here. Gifts from relatives may fund the entire down payment on a one-unit principal residence. HomeReady and Home Possible lend to 97% with income at or below 80% of the area median; HomeOne lends to the same leverage with a first-time buyer and no income limit.
Current conventional snapshot · updated October 3, 2026 · principal residences occupied within sixty days, second homes, and one- to four-unit investment properties · conforming limits apply by county and are confirmed by a Lendmire loan officer · above the limit, see the jumbo program · no prepayment penalty · Lendmire is a broker, never the lender.
Not a commitment to lend, not an offer of credit, not a quote. The figures shown are current conforming program parameters and wholesale overlays that change without notice and apply only after full underwriting of the borrower and the property; the mortgage insurance range is Fannie Mae’s published typical range and the premium on any loan is set by the insurer. Conforming loan limits apply by county. Lendmire is a mortgage broker licensed in sixteen states for consumer mortgages, never the lender. NMLS #2371349.
What a conventional loan is — and how the file is qualified.
The difference between a conventional loan and a government loan is who stands behind it. No agency insures a conforming loan; a private insurer covers the top slice above the threshold, and the agencies buy the loan on their rules. That structure explains each of the four pieces below for a Dublin buyer.
For the program overview, see Lendmire’s conventional loan program, or the statewide guide at Conventional Loans in California; for the mortgage insurance cancellation rules, see the CFPB.
Leverage by occupancy and buyer
The agencies lend most on a home the borrower lives in and less as the occupancy changes: a one-unit principal residence reaches the top leverage, with the first-time buyer’s minimum the lowest down payment in the program; two- to four-unit homes, second homes, and investment properties step down from there, as the table in the snapshot shows for a Dublin buyer.
Credit scores and automated underwriting
What the score does on a Dublin conventional file is set the cost. A lower score raises the loan-level adjustments and the insurance premium; a higher score lowers both. Manual underwriting, used when the automated system cannot approve the file, carries its own minimum score and tighter ratios.
Mortgage insurance that cancels
The federal cancellation rules are the quiet advantage of a conventional loan. The borrower can ask to drop the insurance when the balance reaches the request threshold, the servicer must drop it at the automatic threshold, and it cannot outlast the midpoint of the term. On an FHA loan at full leverage the premium stays for the life of the loan.
Ratios, reserves, and the DU finding
The automated finding is the hinge of a conventional file: it reads the income, the assets, the credit, and the property, allows a total debt ratio up to the automated maximum, and names the reserves the file must show. A Dublin underwriter then verifies what the finding assumed.
The calculator runs this on a Dublin scenario and adds the piece most calculators skip: the month on the amortization schedule when the balance reaches the request and automatic-termination thresholds, so the payment after the insurance ends is visible beside the payment before.
Where Dublin buyers borrow — and how a conforming loan fits.
Start with the market, then the file. The Dublin figures below set the backdrop for a conventional purchase: who owns, what homes are worth on the latest estimate, and what households earn, which together decide what a first-time buyer’s down payment and payment look like locally.
Market context only. Two buyers at the same score can see different files here: one buys at the median and sits well inside the ratio, another stretches above it and needs reserves and a stronger finding. The market sets the spread.
Data sources: U.S. Census Bureau — ACS 5-Year (2024) housing and population estimates, including tenure, home values, gross rents, and household income.
Distinct Dublin neighborhoods, distinct conventional files.
No single conventional file describes Dublin. The submarkets below differ in housing stock, price, occupancy mix, and the appraisal questions they raise, and each one shapes how a conforming loan is put together.
In-town neighborhoods
An older in-town Dublin home is a conventional purchase once the appraisal supports the price. Buyers who expect a condition note write the contract with room for it, and the lighter property standard suits them. About 34% of Dublin’s households rent — roughly 8,299 renter households on the latest Census estimate.
Multi-unit conversions
One side occupied, the other side’s rent counted within the program’s rules: that is the Dublin duplex on a conventional loan, at the multi-unit leverage rather than the single-family one. Roughly 15,866 Dublin households own their homes on the latest Census estimate — 66% of all households, the pool a conventional purchase joins.
High values and the conforming limit
A Dublin home near the top of the conforming range is still a conventional file when the loan fits under the limit; above it the jumbo lanes take over with their own floors, and the county limit decides which side of the line a given Dublin purchase falls on. Dublin is home to about 71K people.
Newer subdivisions on the bypass
On a new Dublin home the appraisal is usually uneventful and the ratio decides the file. Twenty percent down removes the insurance and lowers the ratio at the same time. On a one-unit principal residence at Dublin’s median value, the first-time buyer’s minimum down payment comes to about $39,500 and the standard minimum to about $65,900 — before closing costs, and before the mortgage insurance that comes with either; a second home, a multi-unit home, or a rental starts higher, as the leverage table shows.
Rural-edge and acreage properties
Homes on larger lots around Dublin are conventional purchases when the use is residential; agricultural use puts the property outside the program, and the appraisal values the house and the land on comparable sales. The median owner-occupied home value in Dublin runs near $1,317,100 on the latest Census estimate.
Manufactured homes
The agencies will buy a loan on a Dublin manufactured home that meets their requirements, confirmed by the appraisal; the leverage is set for the property type, and the insurance follows the leverage as it would on any conventional loan. Median household income in Dublin sits near $214,385 on the latest Census estimate.
Each Dublin submarket has its own property story, and the appraisal and the project review are where that story is told. The leverage limits, the cancellation rules, and the automated finding are the constants.
Four ways Dublin buyers put a conforming loan to work.
A good use of a conventional loan is one its shape fits: a decent score, a down payment of any size from the minimum up, an occupancy the agencies allow, and a loan inside the conforming limit. Four common Dublin uses follow.
Buy a second home
For the Dublin vacation or weekend home, the conforming loan is usually the only consumer route: FHA and VA finance principal residences only. The down payment is larger, the reserves are deeper, and the score prices the loan the same way it does on any conventional purchase.
Buy a first home at the first-time-buyer minimum
The first purchase on a conventional loan starts at the first-time buyer’s minimum in the snapshot, with the whole amount allowed as a family gift. A Dublin buyer with a solid score may pay less each month than on FHA because the insurance is priced on the score and ends; the comparison is run on the actual numbers.
Refinance or take cash out
The conventional refinance fits a Dublin owner who wants a different term, a different structure, or cash from equity; each has its own leverage, and a cash-out refinance generally needs a first mortgage at least twelve months old and six months on title. A home equity line that leaves the first mortgage alone is the comparison worth running.
Buy a condominium in a warrantable project
A Dublin condominium is a conventional purchase when the project passes the agencies’ review: owner-occupancy mix, budget and reserves, litigation, commercial space, and ownership concentration. The dues enter the ratio, and the leverage follows the occupancy as it would on a house.
Estimate the payment on a Dublin price before requesting a quote.
The program’s own math on your Dublin inputs: price less the down payment, amortized at the benchmark, with the insurance estimate added while the leverage is above the threshold and the escrows added throughout. The actual rate, premium, payment, and costs come in writing from a licensed loan officer.
Dublin conventional payment estimate
Use the Dublin defaults as a starting point and change the price, the down payment, the buyer type, the term, the insurance estimate, and the escrows to fit.
Editable benchmark: 7.28% as of October 1, 2026 · Freddie Mac 30-year average via FRED®. A conventional market reference, not a conventional loan quote.
Estimate seeded at the low end of Fannie Mae’s published range (0.58%–1.86% a year); the insurer prices the actual premium on the score and the leverage. Applies only above 80% loan-to-value.
Illustrative starting assumptions: a $750,000 price (the highest price the example uses, which sits below Dublin’s median owner-occupied home value), the first-time buyer’s minimum down payment, a thirty-year term at the current Freddie Mac benchmark, mortgage insurance at the low end of Fannie Mae’s published range, property taxes and insurance estimated for California (U.S. Census Bureau). Every field is editable.
Illustrative estimate only — not a Loan Estimate, approval, quote, or commitment to lend. The rate field carries the weekly Freddie Mac thirty-year conventional benchmark, a market reference and not a conventional loan quote; your rate is set by the lender at lock. The mortgage insurance figure is an editable estimate seeded from Fannie Mae’s published typical range, not a premium quote; the insurer prices the actual premium, and the cancellation month assumes scheduled payments with no extra principal and no change in value. Taxes, insurance and dues are editable estimates; closing costs are not included. Conforming loan limits apply by county. Licensed in sixteen states for consumer mortgages.
Same buyer, three very different closings.
The alternatives put the conventional loan’s cost in perspective: FHA charges a premium every month and an upfront premium at closing, VA charges a one-time fee, conventional charges a premium only until equity arrives. The comparison below is written for a Dublin buyer weighing all three.
Conventional, FHA, or VA.
The program’s strengths are the cancellable insurance, the breadth of occupancies, and a cost structure that rewards a strong score; its weakness is the same structure applied to a weak one. A Dublin buyer with a strong score usually pays less each month here than on FHA.
FHA’s leverage is high and its credit standard is forgiving, but its insurance is priced by schedule rather than by score and does not cancel on a full-leverage thirty-year loan. A Dublin buyer comparing the two sees the premium line stay on FHA and disappear on conventional. See Lendmire’s FHA loan program.
For an eligible veteran, service member, or surviving spouse, the VA loan drops the down payment and monthly insurance for a one-time funding fee that many disabled veterans do not pay. Where eligible, it usually beats conventional for a Dublin principal residence; conventional still wins the second home and rental. See Lendmire’s VA loan program.
Choose by profile: a strong score and any down payment point to conventional; a modest score and a small down payment point to FHA; eligibility with full entitlement points to VA. A Dublin loan officer runs all three on the same numbers before recommending one. Above the conforming limit, see the jumbo loan program.
What to prepare for a Dublin scenario review.
The paperwork is the standard mortgage set, with the automated finding deciding how much of it the file actually needs; here is what a Dublin scenario review typically draws on.
This is a general preparation guide, not a universal checklist. The selected lender may request additional information based on the transaction, the property, the automated underwriting finding, and the income picture. Nothing here is legal or tax advice.
Local details that can change the loan.
When a Dublin conventional file surprises someone, the cause is usually one of these: a premium higher than expected, a score that priced differently than hoped, an appraisal under the price, a project that failed review, or a loan amount over the conforming limit.
Use these checks to keep the Dublin file clean and fundable.
A Dublin file that is ready to review has already answered three questions: what leverage and therefore what insurance, what score and therefore what price, and whether the home is inside the agencies’ rules.
- Plan the insurance: the premium is priced on the score and the leverage inside the published range.
- Confirm the score: a self-pulled score can differ from the decision score.
- Check the project: the lender reviews the questionnaire, budget, and insurance before the appraisal.
Mortgage insurance: how much, and until when
The premium on a Dublin loan can be paid monthly, paid by the lender in exchange for a different price, paid as a single premium at closing, or split. The monthly structure cancels under the federal rules, and the others are set by the lender. The calculator shows the monthly structure and the month the thresholds arrive on scheduled payments.
The score sets the cost
The decision score comes from the lender’s report, and with multiple borrowers the automated system uses the average of the median scores. On a Dublin conventional file the score rarely ends eligibility, but it sets the loan-level adjustments and insurance premium, so a few points can change monthly cost.
Warrantable or not
A Dublin condo is a conventional purchase when the project passes agency review: owner-occupancy mix, budget and reserves, litigation, commercial space, single-entity ownership, and insurance. One that fails is non-warrantable and outside the conforming program; a portfolio lender may still lend on other terms.
Second homes, rentals, and financed-property limits
A Dublin household can hold several conventional loans at once, but each financed property adds reserves to the next file and the agencies cap the number of financed properties a borrower may have. Second homes and rentals are leveraged lower than a principal residence and priced for the occupancy.
Waiting periods after a credit event
The agencies season credit events rather than barring them: each bankruptcy chapter, a foreclosure, a deed-in-lieu, and a short sale carry their own period, shortened by documented extenuating circumstances. The snapshot table shows each one for a Dublin buyer planning the timing.
From a Dublin pre-approval to keys in hand.
A conventional purchase runs in a fixed order: pre-approval through the automated system on the score, the ratio, and the reserves; contract and appraisal or value acceptance; underwriting that verifies what the finding assumed; and closing with the insurance structure set. Here is that order for a Dublin buyer.
Pre-approval
A Dublin pre-approval is a sizing exercise run through the automated system: the score, the income, the assets, the occupancy, and the price. The finding sets the ratio room and the reserves, and the loan officer puts the pre-approval in writing for the offer.
Contract and appraisal
With the contract signed, the lender orders the appraisal, or accepts the value the automated system offers where a waiver applies. Seller contributions are checked against the cap for the leverage, and a condominium’s project documents are collected for review before the file moves on.
Underwriting
The underwriter verifies what the automated finding assumed: income, assets and reserves, credit and any seasoning, occupancy, and the property. A manual file follows the lower ratio pair instead. Conditions are issued, documented, and cleared before final approval.
Closing
At closing the loan funds at the chosen leverage, mortgage insurance starts with the first payment if the loan is above the threshold, and escrows for taxes and insurance are set up. A Dublin buyer signs the note and security instrument, occupies the home within the occupancy window, and the agency buys the loan.
A brokerage that prices the whole market.
Lendmire is a mortgage brokerage licensed for consumer lending in sixteen states, and on a conventional loan that buys three things: the file priced across several wholesale programs rather than one, the insurance structure and its exit explained before an offer is written, and the terms in writing from a licensed loan officer.
Several programs, one set of numbers
The comparison printed on this page is run for real on every Dublin file: conventional with the insurer’s actual premium beside FHA with its premiums beside VA where eligibility exists, and the written terms follow from it.
The insurance explained before the offer
The insurance is the program’s cost and the cancellation rules are its advantage, and Lendmire explains both first rather than last: how much the premium is, which structure fits, and when it ends for a Dublin buyer at the price in hand.
Licensed, consumer-purpose, in writing
Lendmire carries the license for the state the Dublin home is in, delivers the disclosures a consumer mortgage requires, and commits the terms to paper. The program figures on this page are read from one guideline source built on the agencies’ published guides.
Trusted by buyers & families alike.
Dublin conventional loan FAQs
The questions below come up on nearly every Dublin conventional conversation. The answers are general; the figures in the snapshot above are the program’s current parameters.
What is a conventional loan, and who is it for?
A conventional loan is the mortgage a Dublin buyer with good credit should compare first: a low down payment for the first-time buyer, insurance that cancels, no upfront premium, and the breadth to finance a second home or a rental under the same rules.
How much do I need to put down on a conventional loan in Dublin?
The snapshot shows the minimums: one for the first-time buyer, one for everyone else, both on a principal residence. The calculator applies either to a Dublin price, and the leverage table gives the figure for second homes and investment property.
What credit score do I need for a conventional loan?
The practical answer is the floor in the snapshot, and the useful answer is that every tier above it lowers the cost. A Dublin buyer with a modest score should run FHA beside conventional, because FHA prices its insurance by schedule rather than by score.
How does private mortgage insurance work, and when does it end?
Three dates matter: the month the balance reaches the request threshold, when the borrower can ask the servicer to drop the premium with a good payment history; the month it reaches the termination threshold, when the servicer must drop it; and the midpoint of the term, the final backstop. Twenty percent down means none of this applies.
What is the conforming loan limit in Dublin?
Conforming limits are set each year by the FHFA, by county and by unit count, with higher limits in high-cost areas, which is why this page does not quote a figure. A Lendmire loan officer confirms the current limit for the county where you are buying; a loan above it needs a larger down payment to fit under the limit or moves to the jumbo program.
How does a conventional refinance work?
Conventional refinances come in two shapes, each with its own leverage in the snapshot. The appraisal, or value acceptance where the system offers it, sets the value; the score prices the loan; and the occupancy sets the limit.
Can the down payment be a gift?
The whole down payment can be a family gift on a one-unit principal residence, with the letter and the transfer documented. A Dublin first-time buyer with family help and a solid score is a routine conventional file.
Should I choose a conventional loan or FHA?
Run both. A strong score and a down payment above the minimum point to conventional, where the insurance is smaller and ends; a modest score and the smallest possible investment point to FHA. The comparison is made on the actual payment and the cash to close.
What are HomeReady, Home Possible, and HomeOne?
Agency programs that open the top conventional leverage to buyers who meet their conditions: HomeReady from Fannie Mae and Home Possible from Freddie Mac for borrowers with income at or below the area-median threshold in the snapshot, with reduced insurance coverage and a homeownership course; HomeOne from Freddie Mac for first-time buyers with no income limit. Each is a conventional loan with its own rules on top.
Can I use a conventional loan to buy a condominium?
In a warrantable project. A Dublin buyer under contract on a condominium should have the lender start the project review early, because a project that fails is outside the conforming program and goes to a portfolio lender on other terms.
Buy in Dublin with a low down payment and insurance that ends.
Begin with a scenario review: the price, the down payment, the score, the income, and the occupancy. A licensed Lendmire loan officer prices the file across the wholesale programs, runs it beside FHA and VA, and puts the terms in writing.
This guide covers Dublin — for the statewide guidelines, markets, and scenarios, see Conventional Loans in California, part of Lendmire’s conventional loan program.
Nearby markets in California: Pleasanton · San Ramon · Livermore · Union City · Hayward · San Leandro · Walnut Creek · Fremont
Related programs: FHA Loans · Jumbo Loans · Refinance Loans