Current conventional guidelines, updated from one source.
Treat these as the program’s fixed points rather than an offer: the minimum down payment for a first-time buyer and for everyone else, the credit floor behind these pages, the leverage at which mortgage insurance begins and the points at which it ends, and the ratio an automated approval allows.
First-time buyer; 5% standard; 97% loan-to-value at the top
On a principal residence the down payment starts at 3% for a first-time buyer and 5% otherwise, the top leverage being 97% loan-to-value. Second homes and investment properties ask for more, as the leverage table shows, and the price of any leverage above 80% is mortgage insurance.
Priced on the score; no agency minimum with an automated approval
Conventional credit works on a slope rather than a cliff: the floor is 620 on the programs Lendmire places loans with, 620 on a manual fixed-rate file and 640 on a manual adjustable, and the score above that sets the loan-level adjustments and the insurance premium. With more than one borrower the automated system reads the average of the median scores.
Required above 80% LTV; removed at 80% by request, 78% automatically
Private mortgage insurance applies above 80% loan-to-value. Fannie Mae’s 2022 figures put the annual cost in a range of 0.58%–1.86%, depending on the score and the leverage. It ends by request at 80% of the original value, automatically at 78%, and no later than the midpoint of the term.
With an automated approval; 36% to 45% on a manual file
Lenders compare total debt against gross income, with limits up to 50% on an automated approval and 36% to 45% on a manual file. The housing payment counted includes the mortgage insurance while it applies, which is why cancellation changes the ratio as well as the payment.
| Purpose | Occupancy and program | Maximum LTV |
|---|---|---|
| Purchase | One-unit principal residence, first-time buyer (fixed rate) | 97% |
| Purchase | One-unit principal residence, standard | 95% |
| Purchase | HomeReady / Home Possible (income limits apply) | 97% |
| Purchase | Two- to four-unit principal residence | 95% |
| Purchase | Second home | 90% |
| Purchase | Investment property, one unit | 85% |
| Purchase | Investment property, two to four units | 75% |
| Refinance | Limited cash-out (rate-and-term), one-unit principal residence | 95% |
| Refinance | Cash-out, one-unit principal residence | 80% |
| Refinance | Cash-out, two to four units, second home or investment | 75% |
| Combined LTV | Maximum contribution |
|---|---|
| above 90 percent | 3% of the sales price |
| 75.01 to 90 percent | 6% of the sales price |
| 75 percent or less | 9% of the sales price |
| investment property (any) | 2% of the sales price |
| Event | Waiting period |
|---|---|
| Chapter 7 or 11 bankruptcy | four years from discharge or dismissal (two years with documented extenuating circumstances) |
| Chapter 13 bankruptcy | two years from discharge; four years from dismissal (two with extenuating circumstances) |
| Multiple bankruptcy filings | five years when more than one filing within the past seven years |
| Foreclosure | seven years (three with extenuating circumstances, then limited to a principal residence or second home at 90 percent LTV, purchase or limited cash-out) |
| Deed-in-lieu, short sale or mortgage charge-off | four years (two with extenuating circumstances) |
Mortgage insurance: Fannie Mae reports that private mortgage insurance typically ranged from 0.58%–1.86% of the loan amount a year; the premium on a specific loan is priced by the insurer on the score, the leverage, and the coverage, and is never quoted here. Gifts from relatives may fund the entire down payment on a one-unit principal residence. HomeReady and Home Possible lend to 97% with income at or below 80% of the area median; HomeOne lends to the same leverage with a first-time buyer and no income limit.
Current conventional snapshot · updated October 3, 2026 · principal residences occupied within sixty days, second homes, and one- to four-unit investment properties · conforming limits apply by county and are confirmed by a Lendmire loan officer · above the limit, see the jumbo program · no prepayment penalty · Lendmire is a broker, never the lender.
Informational only; not a commitment to lend, an approval, or a quote. Every figure on this page is a program parameter read from Lendmire’s guideline source, built on the agencies’ published guides, and may change without notice; eligibility, the loan amount, the insurance, and the ratios depend on the credit profile, the property, the occupancy, and underwriting. The mortgage insurance estimate is editable and not a premium quote. Lendmire is a mortgage broker licensed in sixteen states for consumer mortgages. NMLS #2371349.
What a conventional loan is — and how the file is qualified.
A conventional loan is a mortgage written to the rules of Fannie Mae and Freddie Mac so a lender can sell it to them after closing. Those rules decide the leverage by occupancy, the credit standard, the insurance above the threshold, and the ratios, and the four cards below take a Redmond file apart along exactly those lines.
For the program overview, see Lendmire’s conventional loan program, or the statewide guide at Conventional Loans in Washington; for the mortgage insurance cancellation rules, see the CFPB.
Leverage by occupancy and buyer
The down payment a Redmond buyer needs depends on three things: whether the home is a principal residence, a second home, or a rental; whether it is one unit or several; and whether the buyer counts as a first-time buyer. The snapshot table gives the answer for every combination the program allows.
Credit scores and automated underwriting
Conventional credit is priced more than it is gated. The floor in the snapshot is the lowest score the lanes accept, and above the floor the score sets the loan-level price adjustments and the mortgage insurance premium. A Redmond buyer with a stronger score pays less on both lines.
Mortgage insurance that cancels
Insurance structures vary: borrower-paid monthly is the default, and lender-paid, single-premium, and split-premium versions exist, each built into the loan differently. The published typical range in the snapshot is Fannie Mae’s, and the actual premium for a Redmond file comes from the insurer at lock, never from this page.
Ratios, reserves, and the DU finding
Total debt-to-income is the ratio that counts: the full housing payment, insurance included, plus every monthly obligation, against gross income. Automated approvals reach the higher ceiling in the snapshot; manual files are held to the lower pair, with the higher of the two needing the matrix’s credit and reserve criteria.
None of this is a decision. The appraisal can come in under the price, the rate is set at lock, the premium is set by the insurer, and the automated finding sets the reserves. What stays fixed is the structure the calculator reproduces: price, down payment, leverage, insurance, payment.
Where Redmond buyers borrow — and how a conforming loan fits.
These numbers are Redmond’s, not any one borrower’s: owner households, median home value, and household income from the U.S. Census Bureau. They give the scale of a typical purchase here; the score, the appraisal, and the household’s own income give the loan.
Read the figures as backdrop. Higher values mean a larger down payment in dollars and a larger insurance premium; lower values mean a payment that leaves more room under the ratio ceiling. The percentages do not move; what they amount to does.
Data sources: U.S. Census Bureau — ACS 5-Year (2024) housing and population estimates, including tenure, home values, gross rents, and household income.
Distinct Redmond neighborhoods, distinct conventional files.
Where Redmond buyers shop, and what the conforming file turns on in each place: the occupancy, the property type the appraiser sees, the project review it needs, and the price the ratio has to carry.
Condominiums and townhomes
Townhomes in Redmond finance like houses when they are fee simple and like condominiums when they are organized as one; the lender settles which before the appraisal, and the leverage follows the occupancy either way. About 57% of Redmond’s households rent — roughly 18,798 renter households on the latest Census estimate.
Established close-in neighborhoods
An older Redmond house is a routine conventional purchase; the appraisal is lighter on condition than a government appraisal, which is one reason buyers of older homes often choose this program. The value against the contract price is the usual question. Redmond is home to about 77K people and sits within the Seattle-Tacoma-Bellevue, WA area.
Higher-value homes
A high-value Redmond purchase can still be a conforming loan when the loan amount fits under the county limit, and a high-cost county’s higher range extends that reach; above it, the jumbo program takes the file with its own leverage and reserves. On a one-unit principal residence at Redmond’s median value, the first-time buyer’s minimum down payment comes to about $35,000 and the standard minimum to about $58,400 — before closing costs, and before the mortgage insurance that comes with either; a second home, a multi-unit home, or a rental starts higher, as the leverage table shows.
Two-to-four-unit homes
Owner occupancy of one unit sets the leverage on a Redmond multi-unit conventional loan; without it, the property is an investment purchase at the lower investment leverage. The appraisal reads every unit and the rents. Roughly 14,302 Redmond households own their homes on the latest Census estimate — 43% of all households, the pool a conventional purchase joins.
Newer infill and recent construction
New rows and recent infill in Redmond tend to appraise cleanly, so the loan amount is the question: a contract near the conforming limit is checked against the county figure before the offer, and a loan above it needs a larger down payment or the jumbo program. Median household income in Redmond sits near $162,560 on the latest Census estimate.
Investor and second-home purchases
An investor buying a Redmond unit to rent uses the conventional program at the investment leverage, documents the rent the agencies allow, and shows reserves for every financed property; the agencies cap how many such loans one borrower may carry. The median owner-occupied home value in Redmond runs near $1,167,800 on the latest Census estimate.
Across all of Redmond, five questions settle a conventional loan: what the appraisal supports, whether the property passes the agencies’ review, how the home will be occupied, what the score costs, and what the ratio and reserves allow.
Four ways Redmond buyers put a conforming loan to work.
The conventional loan is one of the broadest mortgage programs there is: it buys a first home with a small down payment, a move-up home with cancellable insurance, a second home, and a rental, and it refinances all of them. The cards below are the uses that bring Redmond borrowers to it most.
Buy a second home
Conventional financing is the consumer program that reaches a second home: a Redmond buyer brings the down payment the leverage table shows for that occupancy, qualifies on the full payment of both homes, and shows the reserves the finding requires. The home must be for the owner’s use, not a rental business.
Buy with twenty percent down and no insurance
The move-up Redmond buyer selling one home and bringing twenty percent to the next usually lands here: no mortgage insurance, the strongest cost tier the score earns, and a loan the automated system reviews with the equity brought forward counted in the file.
Buy a first home at the first-time-buyer minimum
For a Redmond first purchase, the conventional route pairs the agencies’ lowest down payment with insurance that cancels and, on the monthly structure, no upfront premium; the file is qualified on the score, the ratio, the reserves, and the automated finding, and a family gift may fund the whole down payment.
Buy an investment property
The rental purchase is inside the conventional program at a lower leverage than a principal residence: a Redmond buyer uses the agencies’ rules for counting rental income, shows reserves for every property financed, and accepts loan-level adjustments that reflect the occupancy.
Estimate the payment on a Redmond price before requesting a quote.
This is what a Redmond conventional purchase costs each month at the leverage you choose, with the insurance shown as a separate line and then removed: the calculator finds the month on the schedule when the balance reaches the request threshold and the month it reaches the automatic threshold, and shows the payment on each side. The rate shown is the weekly Freddie Mac average, editable, and not a quote.
Redmond conventional payment estimate
Use the Redmond defaults as a starting point and change the price, the down payment, the buyer type, the term, the insurance estimate, and the escrows to fit.
Editable benchmark: 7.28% as of October 1, 2026 · Freddie Mac 30-year average via FRED®. A conventional market reference, not a conventional loan quote.
Estimate seeded at the low end of Fannie Mae’s published range (0.58%–1.86% a year); the insurer prices the actual premium on the score and the leverage. Applies only above 80% loan-to-value.
Illustrative starting assumptions: a $750,000 price (the highest price the example uses, which sits below Redmond’s median owner-occupied home value), the first-time buyer’s minimum down payment, a thirty-year term at the current Freddie Mac benchmark, mortgage insurance at the low end of Fannie Mae’s published range, property taxes and insurance estimated for Washington (U.S. Census Bureau). Every field is editable.
Illustrative estimate only — not a Loan Estimate, approval, quote, or commitment to lend. The rate field carries the weekly Freddie Mac thirty-year conventional benchmark, a market reference and not a conventional loan quote; your rate is set by the lender at lock. The mortgage insurance figure is an editable estimate seeded from Fannie Mae’s published typical range, not a premium quote; the insurer prices the actual premium, and the cancellation month assumes scheduled payments with no extra principal and no change in value. Taxes, insurance and dues are editable estimates; closing costs are not included. Conforming loan limits apply by county. Licensed in sixteen states for consumer mortgages.
Same buyer, three very different closings.
The alternatives put the conventional loan’s cost in perspective: FHA charges a premium every month and an upfront premium at closing, VA charges a one-time fee, conventional charges a premium only until equity arrives. The comparison below is written for a Redmond buyer weighing all three.
Conventional, FHA, or VA.
Conventional fits the Redmond buyer with a solid score: the premium is smaller than FHA’s for strong credit and it ends, the monthly structure carries no upfront premium, and twenty percent down removes insurance altogether. A modest score or a thin file is where FHA competes.
Where conventional prices the score, FHA prices by schedule. FHA fits the buyer whose score would be priced heavily on a conventional loan, or who needs the room FHA’s ratio tiers allow; it rarely wins for a Redmond buyer with strong credit and a down payment above the minimum. See Lendmire’s FHA loan program.
VA beats conventional on the principal residence for nearly every eligible borrower; conventional beats VA on everything VA does not touch: second homes, rentals, and buyers without the certificate. The two often sit side by side in one Redmond household. See Lendmire’s VA loan program.
Conventional for the solid score, the move-up buyer, the second home, and the rental; FHA for the modest score and the small investment; VA for the eligible borrower buying a principal residence. The Redmond file is priced on all three before one is recommended. Above the conforming limit, see the jumbo loan program.
What to prepare for a Redmond scenario review.
What a lender reads on a Redmond conventional loan, and what you can have ready before anyone asks.
This is a general preparation guide, not a universal checklist. The selected lender may request additional information based on the transaction, the property, the automated underwriting finding, and the income picture. Nothing here is legal or tax advice.
Local details that can change the loan.
Check these before leaning on any number for Redmond: the mortgage insurance structure and when it ends, the score and what it costs, the appraisal, the condominium review, the conforming limit, the ratio and reserves, and the occupancy.
Use these checks to keep the Redmond file clean and fundable.
Three things to settle before a Redmond review: how the mortgage insurance will be structured and when it ends, where the decision score lands and what it prices, and whether the property has any agency question attached.
- Plan the insurance: the premium is priced on the score and the leverage inside the published range.
- Confirm the score: the lender’s report sets the decision score; multiple borrowers use the average of the median scores.
- Mind the appraisal: value acceptance or a waiver, where offered, replaces the appraisal.
Mortgage insurance: how much, and until when
Cancellation on request needs a good payment history, no subordinate liens, and no decline in value; automatic termination needs only that the loan be current. A Redmond owner whose home has gained value may also ask the servicer to recognize the current value under its own rules, which is a servicer decision rather than a program right.
The score sets the cost
The decision score comes from the lender’s report, and with multiple borrowers the automated system uses the average of the median scores. On a Redmond conventional file the score rarely ends eligibility, but it sets the loan-level adjustments and insurance premium, so a few points can change monthly cost.
The appraisal and value acceptance
Two outcomes matter on a Redmond appraisal: the value, which caps the loan, and the condition, which the lender must find acceptable. A waiver or value acceptance, where the automated system offers one, removes both questions and the appraisal fee at once, and the file closes on the system’s valuation.
Second homes, rentals, and financed-property limits
Buying a second home or a rental in Redmond on a conventional loan means qualifying on the full payments of every property owned, documenting the rents the agencies allow, and showing reserves for each. The leverage table gives the down payment for each occupancy.
Occupancy and its leverage
Each occupancy has its own leverage limit and loan-level adjustments: a principal residence occupied within sixty days of closing reaches the top of the table, a second home is lower, an investment property lower still. A Redmond buyer who states one occupancy and uses another has misrepresented the loan.
From a Redmond pre-approval to keys in hand.
A conventional purchase runs in a fixed order: pre-approval through the automated system on the score, the ratio, and the reserves; contract and appraisal or value acceptance; underwriting that verifies what the finding assumed; and closing with the insurance structure set. Here is that order for a Redmond buyer.
Pre-approval
Start with the score, the income, the down payment, and the occupancy. A Lendmire loan officer runs the automated system, confirms the leverage and the insurance for the down payment chosen, checks the loan against the conforming limit, compares the structure with FHA and VA on the same numbers, and provides the terms in writing.
Contract and appraisal
With the contract signed, the lender orders the appraisal, or accepts the value the automated system offers where a waiver applies. Seller contributions are checked against the cap for the leverage, and a condominium’s project documents are collected for review before the file moves on.
Underwriting
The underwriter verifies what the automated finding assumed: income, assets and reserves, credit and any seasoning, occupancy, and the property. A manual file follows the lower ratio pair instead. Conditions are issued, documented, and cleared before final approval.
Closing
The Redmond closing applies the program’s structure: the insurance premium in the payment while it applies, the escrow account, and no upfront premium on the monthly structure. The buyer moves in within sixty days on a principal residence, and the servicer tracks the balance toward the cancellation thresholds.
A brokerage that prices the whole market.
The case for a brokerage on a conventional loan is candor with numbers: the same file priced across programs, the insurance premium and its cancellation month stated outright, the leverage checked against the occupancy, and the terms in writing.
Several programs, one set of numbers
A lender with one rate sheet sells that sheet; a brokerage with several can say which fits. For a Redmond buyer with a strong score that is usually a conventional loan on the program whose cost is lowest for that file; for a modest score it may be FHA, and the arithmetic decides.
The insurance explained before the offer
The insurance is the program’s cost and the cancellation rules are its advantage, and Lendmire explains both first rather than last: how much the premium is, which structure fits, and when it ends for a Redmond buyer at the price in hand.
Licensed, consumer-purpose, in writing
What this page shows are the agencies’ parameters and the wholesale overlays; what a specific Redmond loan gets is a written set of terms from a licensed loan officer after the review. Lendmire is a broker, never the lender.
Trusted by buyers & families alike.
Redmond conventional loan FAQs
What a conventional loan is, how much it takes to buy, what score it needs, how the mortgage insurance works and ends, and how the conforming limit works, answered for Redmond buyers.
What is a conventional loan, and who is it for?
A conventional loan is the mortgage a Redmond buyer with good credit should compare first: a low down payment for the first-time buyer, insurance that cancels, no upfront premium, and the breadth to finance a second home or a rental under the same rules.
How much do I need to put down on a conventional loan in Redmond?
Less than most people expect on a principal residence, and it can be a gift from family. The trade for a small down payment is mortgage insurance, which cancels as the balance falls; the calculator shows the Redmond payment with it and without it.
What credit score do I need for a conventional loan?
The practical answer is the floor in the snapshot, and the useful answer is that every tier above it lowers the cost. A Redmond buyer with a modest score should run FHA beside conventional, because FHA prices its insurance by schedule rather than by score.
How does private mortgage insurance work, and when does it end?
It is temporary insurance for the lender, paid by the borrower while the loan sits above the threshold. On a Redmond loan with scheduled payments the calculator shows the month the balance reaches the request point and the automatic one; extra principal or a rise in value, recognized by the servicer, can bring the request point sooner.
What is the conforming loan limit in Redmond?
There is a county limit, revised annually, and some counties carry a high-balance range above the standard figure. The loan officer confirms the current limit at pre-approval; above it, the jumbo program takes the file.
Can I take cash out with a conventional refinance?
It is available at the cash-out leverage shown in the snapshot, with the occupancy setting the limit and the score setting the price. A Redmond owner weighs it against a home equity line on the same numbers.
What happens after my Redmond offer is accepted?
Your Redmond contract goes to the lender, the appraisal is ordered or waived, and underwriting follows. The usual detours are a value under the price or a condition on an older home; a loan officer keeps the timeline honest.
Can I buy a second home with a conventional loan?
It is the usual route to a Redmond second home, since FHA and VA finance principal residences only. Expect a larger down payment than on a principal residence, deeper reserves, and adjustments for the occupancy.
Should I choose a conventional loan or FHA?
It depends on the score, the down payment, and how long you will keep the loan. Conventional prices the insurance on the score and cancels it; FHA prices by schedule and keeps it for the term at full leverage. A strong score usually pays less on conventional; a modest score usually pays less on FHA. A Redmond loan officer runs both in writing.
Can I get a conventional loan after a bankruptcy or foreclosure?
Each event has its own period counted from a specific date, and the lender confirms it from the documents. Clean credit since the event and a rebuilt score carry weight once the period has run.
A Redmond conforming loan, from the first numbers to the closing table.
When you are ready, a Redmond review sizes the loan, settles the program and the insurance structure, and produces written terms. Nothing on this page commits anyone to lend.
This guide covers Redmond — for the statewide guidelines, markets, and scenarios, see Conventional Loans in Washington, part of Lendmire’s conventional loan program.
Nearby markets in Washington: Kirkland · Bellevue · Sammamish · Bothell · Seattle · Shoreline · Renton · Burien
Related programs: FHA Loans · Jumbo Loans · Refinance Loans