Current Dallas hard money guidelines, updated from one source.
Every figure below comes from Lendmire’s centralized hard money standards source and refreshes when current program guidance changes. Final terms are set on the borrower, the property, the documented track record, and the selected lending partner.
Maximum loan-to-cost
Top tier for investors with five or more completed projects; 90% with two or more. First-time investors qualify at lower tiers.
Maximum bridge leverage
Purchase without rehab, measured against both the purchase price and the value. Property that needs time rather than work, refinanced once stabilized.
Maximum cash-out LTV
Cash-out and refinance ceiling against current value. Proceeds depend on the payoff, costs, the exit, and complete underwriting.
Minimum FICO
Additional conditions apply under 660. Underwriting is asset-based; the published floor does not by itself reach the top leverage tier.
Every fix-and-flip tier is separately capped at this share of the after-repair value.
Released in draws against completed, inspected work — not at closing.
Interest-only payments; no prepayment penalty.
Current standard-program snapshot · updated August 28, 2026. Loan amounts up to $5,000,000, larger by exception. Ground-up construction up to 90% of cost for builders with three or more completed projects, to 10 units. Figures are outer bounds, not offers; Lendmire is a mortgage broker, not a lender.
Business-purpose financing available in 40 markets, including Washington, D.C. By Census estimate, Dallas has roughly 1,307,930 residents, a median owner-occupied value of about $320.7K, median gross rent around $1,472, and renter households near 57.6% — context for a hard money file, not project underwriting.
What a Dallas hard money loan is — and how the approval works.
A hard money loan is short-term, business-purpose financing secured by non-owner-occupied real estate. The lender does not lead with personal-income calculations; it leads with the property, the purchase price, the budget, the after-repair value, and the exit, then weighs the investor’s documented experience.
The asset and the plan lead the analysis
The central questions are what the property is worth today, what it will be worth once the work is complete, and whether the budget and timeline get it there. The stronger that story, the more leverage may be available.
Leverage is tiered by documented experience
Documented completed projects are what move an investor up the leverage tiers; a first project qualifies at a lower tier rather than being turned away. The snapshot above shows where every tier sits today.
Rehab funds in draws, not at closing
Rather than funding at closing, the rehab portion is released against completed, inspected work. Budget, scope, contractor, and draw schedule are built into the file from the start, not added later.
The exit is underwritten alongside the loan
A sale or a refinance into long-term financing repays the note, and lenders look for that path before closing. Mapping the refinance early is where a broker who works both products earns the fee.
Total project cost generally means the purchase price plus the rehab or build budget. The investor’s experience tier caps loan-to-cost, and each tier is separately capped as a share of the after-repair value. The live program cards above show the current ceilings; the calculator below lets you model your own Dallas project. The lender sets the final numbers from the appraisal, the scope of work, and the complete file.
A local market with several distinct project types.
Dallas brings together established neighborhoods, newer subdivisions, workforce housing, and blocks where older housing stock creates renovation demand. Each project type carries its own purchase, rehab, resale, and refinance considerations.
Citywide figures are market context, not project-level underwriting. The lender still evaluates the subject property’s purchase price, scope of work, after-repair value, exit, and program eligibility.
Data source: U.S. Census Bureau QuickFacts — Dallas, ACS 5-Year 2020–2024: total population, renter-occupied share of occupied housing units, median value of owner-occupied housing units, and median gross rent.
Distinct Dallas submarkets, distinct project considerations.
Hard money lenders in Dallas, TX underwrite very different projects across the city — cosmetic flips, full renovations, small multifamily repositions, and new construction. Purchase prices, renovation scope, resale depth, and refinance demand all shape each file.
Small Multifamily
Because many Dallas households rent, two-to-four-unit repositions have a built-in exit here: stabilize the building on hard money, turn the units, then refinance into DSCR financing on the improved rents.
Workforce Single-Family
Dallas’ workforce single-family blocks keep first and second projects within reach — moderate budgets, an owner-occupant resale or a rental refinance as the exit, and an after-repair value measured against sales on nearby streets.
The Suburban Ring
The suburban ring around Dallas sells finished houses to families, so full renovations are underwritten to that resale, and a bridge purchase covers the house that needs time rather than work.
Newer Stock and Light Rehab
Dallas’ newer housing stock lends itself to bridge purchases and light rehabs rather than full renovations. The file is quick to stabilize, and the refinance into long-term financing is planned before closing.
Condominium and Association Projects
For Dallas condominium projects, the association package — documents, budgets, rental rules — becomes part of underwriting next to the scope of work, with a resale as the typical exit.
Infill and Ground-Up Construction
Infill lots and teardowns in Dallas support ground-up construction, with leverage tiered by the builder’s completed projects and capped against the completed value. Plans, budget, and the exit are reviewed alongside the land value.
Eligible investment-property projects across the Dallas area, from the core out to the surrounding towns, can also be reviewed; availability depends on the property, the program, and the current lending footprint.
What it looks like in this market.
Three composite projects reflecting how investors actually buy, renovate, and refinance here — each paired with the leverage tier and exit that fits it.
Small multifamily, stabilized and refinanced
A Dallas two-to-four-unit building with below-market rents is bought on a bridge loan, renovated unit by unit, and refinanced into DSCR financing once the rent roll is stabilized; the refinance is mapped before closing.
Fit: bridge or rehab · DSCR refinance exit
Infill construction, builder tier
On a Dallas teardown, an experienced builder finances land and construction together, draws against completed stages, and exits by resale or by refinancing the finished house into rental financing.
Fit: construction · completed-value cap
First flip, cosmetic scope
A first-time investor buys a dated single-family house in Dallas with a cosmetic scope, closes purchase and rehab as one loan at the first experience tier, draws against completed work, and sells to an owner-occupant at the after-repair value the lender accepted.
Fit: purchase plus rehab · first-tier leverage
Four ways Dallas investors can use hard money.
Here are the core transaction paths available for eligible Dallas investment properties. The right structure depends on the project, the after-repair value, the investor’s experience, credit, reserves, and current lender guidelines.
Fix-and-flip loans
The purchase and the rehab budget close as one loan, with rehab dollars funded in draws against completed work. Leverage follows the investor’s experience tier and is capped against the after-repair value.
Bridge purchase loans
Take down a Dallas property that needs time rather than construction — a vacancy, a condition item, a seller who will not wait for conventional financing — and refinance into long-term financing once it is stabilized.
Cash-out and refinance
Use the equity in a free-and-clear or low-leverage investment property to fund the next acquisition or rehab, within the cash-out ceiling shown in the current snapshot, with the exit underwritten alongside the loan.
Ground-up construction
Residential new builds up to the unit count shown in the snapshot, with leverage set by the builder’s completed projects and capped against the completed value, and the build budget funded in draws.
Model a Dallas project before requesting a quote.
The calculator preloads editable Dallas sample assumptions for purchase price, rehab budget, and after-repair value, and its leverage tiers refresh from Lendmire’s centralized hard money standards source. Change any field; the result is a leverage estimate, not a loan offer.
Dallas hard money calculator
Provide the purchase price, the rehab or build budget, and the after-repair value you expect the appraisal to support; the calculator returns the estimated maximum loan for the selected experience tier, before closing costs and reserves.
The leverage tiers shown are today’s program ceilings, read from Lendmire’s centralized hard money standards source.
Starting assumptions for Dallas are illustrative and come from the citywide median owner-occupied housing value. Edit any field.
This is an illustrative leverage estimate, not a cost quote or a loan offer. The ceilings are outer bounds tiered by documented experience; the actual loan amount, draw schedule, reserves, and eligibility are set by the appraisal, the scope of work, and complete underwriting by the selected lender.
What lenders still review after the leverage math.
The loan-to-cost ceiling sits at the center, yet it is only one part of the file. A full Dallas hard money review also looks at the investor’s track record and liquidity, the property’s current and after-repair value, the scope of work, and the exit.
Same investment property, different point in its life.
Short-term and asset-based. Underwriting covers the purchase, the budget, the after-repair value, and the exit; leverage is tiered by documented experience and the rehab funds in draws. Made for property that is not yet stabilized.
Long-term and cash-flow-based. After the property is renovated and rented, a DSCR loan qualifies on the rental income relative to the monthly payment — the usual take-out for a completed Dallas hard money project.
It is common for a Dallas project to use both: hard money to buy and renovate, then a DSCR refinance on the stabilized rent roll. Lendmire arranges both, so the exit is planned before the first draw is funded.
What to prepare for a Dallas hard money review.
Exact documentation varies, but these four categories give an investor a practical starting point before requesting a project-specific quote.
Treat this as a general preparation guide, not a universal document checklist. The selected lender may ask for additional information based on the property, borrower, entity, project, and underwriting findings.
Local details that can change the leverage decision.
Dallas costs, property characteristics, and project logistics can materially change a hard money result or a property’s eligibility. Work through the practical issues below before relying on a target leverage or a projected after-repair value.
Use these checks to keep the Dallas file clean and fundable.
Because treatment differs by lending partner, this is not a promise of a universal outcome; it spotlights the main issues an investor should settle before closing.
After-repair value support
Every leverage tier is capped against the after-repair value the lender accepts, which comes from an appraisal or valuation and recent comparable sales, not from the investor’s projection. Optimistic Dallas value assumptions are the most common reason a file lands at a lower loan amount than expected.
Scope, budget, and draw inspections
The draw schedule comes from a line-item scope of work with a contingency, a contractor, and a realistic timeline. Because draws release only against completed, inspected work, a thin budget or a missing permit stops the project, not just the file.
Coastal insurance, flood, and wind
On coastal Dallas property, wind and flood exposure sit on top of the builder’s-risk or vacant-property coverage the lender requires. Premiums, deductibles, and availability move the carrying-cost budget and can change the rental refinance that repays the note — resolve them before closing.
Entity vesting and title
Business-purpose loans are commonly vested in an LLC or other entity, with personal guarantees from the members. Formation documents, ownership information, and clean title should be ready before closing so the entity never becomes the reason a closing slips.
The exit and the timeline
Hard money is short-term, so the sale or refinance that repays it has to fit inside the term. For a Dallas property that will be rented, planning the DSCR refinance at the start — seasoning, rent support, and leverage — keeps the exit from becoming a scramble when the note comes due.
From a Dallas project to closing.
Start from the property and the plan, weigh the available structures, document the project, then move through underwriting to closing and the exit.
Run the project
Provide the Dallas property details, purchase price, budget, after-repair value, experience, credit range, and the intended exit.
Compare partners
Lendmire compares multiple hard money and private money options for leverage, draw process, experience fit, and exit flexibility.
Document the project
Assemble the appraisal or valuation, scope of work, contractor, insurance, title, entity, and asset documentation the lender requires.
Close and exit
Finalize the structure, fund the purchase, draw against completed work, and execute the sale or the refinance on schedule.
A brokerage built around investor projects.
Dallas projects range from a first cosmetic flip to ground-up construction and multi-property portfolios. Those files do not all belong with the same lender.
Partner comparison
Lendmire compares multiple hard money and private money partners rather than forcing every Dallas project into one institution’s box.
Investor specialization
Leverage, experience tiers, draw mechanics, entity vesting, reserves, property type, and the exit that repays the note are the focus of the review.
The exit, planned early
Lendmire arranges DSCR financing as well, so the refinance that retires the hard money note is planned before the purchase closes.
Trusted by buyers & investors alike.
Dallas hard money loan FAQs
Below are answers to the purchase, rehab, construction, entity, leverage, and exit questions Dallas investors commonly raise. Final program terms remain project-specific.
Can I use a hard money loan to buy a Dallas fix-and-flip property?
Yes. Eligible Dallas investment properties can be bought and renovated on a hard money loan through select lending partners: one loan for the purchase and the rehab budget, rehab funded in draws against completed work, and leverage tiered by documented experience and capped against the after-repair value in the current snapshot.
Do I need experience to get a hard money loan in Dallas?
No — first-time investors are eligible. Leverage is tiered by documented completed projects, so a first project qualifies at a lower tier than an investor with a longer record. The current snapshot shows where each tier sits today, and the calculator lets you model a Dallas project at your own tier.
What is the exit on a Dallas hard money loan?
A sale once the work is done, or a refinance into long-term financing — for a rented property that is typically a DSCR loan qualified on the rental income. Lenders want the path visible before closing, and since Lendmire also arranges DSCR financing, the Dallas refinance can be planned with the hard money loan.
How do I compare hard money lenders in Dallas, TX?
Focus on what changes your result: the leverage tier your track record qualifies for, how rehab draws are inspected and released, how the after-repair value is set, which property types and Dallas markets are accepted, and how the exit is treated. Lendmire weighs multiple hard money and private money partners on those factors before placing a file.
Does coastal insurance affect a Dallas hard money project?
It can — wind, flood, and builder’s-risk coverage on a coastal Dallas property raise carrying costs and can change the exit, particularly when the take-out is a rental refinance. Lenders want that insurance picture settled before closing, not uncovered mid-project.
Can hard money fund ground-up construction in Dallas?
Yes. Eligible ground-up residential builds in Dallas are financed up to the unit count in the snapshot, with leverage set by the builder’s completed projects and capped against the completed value. Plans, budget, builder information, and the exit are reviewed with the land value.
How long is a hard money loan?
Hard money is short-term: the current snapshot shows the term range, payments are interest-only during the term, and the current program carries no prepayment penalty. It is designed to be repaid by the exit — a sale or a refinance — not carried for years.
What should I submit for a Dallas hard money quote?
Begin with the property address or market, the project type, the purchase price or payoff, the rehab or build budget, the expected after-repair value, your completed projects, the entity holding title, your credit range, and the timeline. From there a loan officer identifies what else the selected lender needs for a Dallas file.
What documents does a hard money lender typically ask for?
Identification and credit authorization, entity documents when vesting in an LLC, a list of completed projects, the purchase contract or payoff, a line-item scope of work and budget, contractor information, comparable sales supporting the after-repair value, evidence of the cash to close, and insurance and title information. The selected lender may ask for more based on the project.
Does the after-repair value come from my estimate?
No — the lender sets the after-repair value from an appraisal or valuation and recent comparable sales, not from the investor’s projection. Build your own estimate the same way, because every leverage tier is capped against the value the lender accepts.
Bring the Dallas project. We will help structure the financing.
Bring a fix-and-flip, bridge purchase, cash-out, or ground-up construction scenario; an initial review requires no credit pull and no commitment.
This page is Dallas-specific — for guidelines and scenarios statewide, visit Hard Money Loans in Texas within Lendmire’s hard money loan program.
Also in Dallas: DSCR Loans in Dallas, TX