Current Irving hard money guidelines, updated from one source.
Every figure below comes from Lendmire’s centralized hard money standards source and refreshes when current program guidance changes. Final terms are set on the borrower, the property, the documented track record, and the selected lending partner.
Maximum loan-to-cost
Top tier for investors with five or more completed projects; 90% with two or more. First-time investors qualify at lower tiers.
Maximum bridge leverage
Purchase without rehab, measured against both the purchase price and the value. Property that needs time rather than work, refinanced once stabilized.
Maximum cash-out LTV
Cash-out and refinance ceiling against current value. Proceeds depend on the payoff, costs, the exit, and complete underwriting.
Minimum FICO
Additional conditions apply under 660. Underwriting is asset-based; the published floor does not by itself reach the top leverage tier.
Every fix-and-flip tier is separately capped at this share of the after-repair value.
Released in draws against completed, inspected work — not at closing.
Interest-only payments; no prepayment penalty.
Current standard-program snapshot · updated August 28, 2026. Loan amounts up to $5,000,000, larger by exception. Ground-up construction up to 90% of cost for builders with three or more completed projects, to 10 units. Figures are outer bounds, not offers; Lendmire is a mortgage broker, not a lender.
Business-purpose financing available in 41 markets, including Washington, D.C. By Census estimate, Irving has roughly 256,492 residents, a median owner-occupied value of about $315.6K, median gross rent around $1,619, and renter households near 61.9% — context for a hard money file, not project underwriting.
What an Irving hard money loan is — and how the approval works.
A hard money loan is short-term, business-purpose financing secured by non-owner-occupied real estate. Personal-income calculations are not the starting point; the property, the purchase price, the budget, the after-repair value, and the exit are — and the investor’s documented experience is weighed after them.
The asset and the plan lead the analysis
Three questions carry the file: what the property is worth today, what it will be worth after the work, and whether the budget and timeline can close that gap. A stronger answer to each can mean more leverage.
Leverage is tiered by documented experience
A record of completed projects unlocks the top leverage tiers. First-time investors start at lower tiers rather than being turned away, and the current snapshot above shows where each tier stands today.
Rehab funds in draws, not at closing
The rehab portion of the loan is released against completed, inspected work rather than at closing. Budget, scope, contractor, and draw schedule are part of the file from the beginning, not an afterthought.
The exit is underwritten alongside the loan
Repayment comes from a sale or a refinance into long-term financing, and lenders want to see that path before closing. Planning the refinance early is where a broker who works both products earns the fee.
Total project cost generally means the purchase price plus the rehab or build budget. Loan-to-cost is capped by the investor’s experience tier, and every tier is separately capped as a share of the after-repair value. The live program cards above show the current ceilings, while the calculator below lets you model your own Irving project. The lender sets the final numbers from the appraisal, the scope of work, and the complete file.
A local market that supports several distinct project types.
Irving spans established neighborhoods, newer subdivisions, workforce housing, and older blocks where renovation demand is constant. Each project type comes with distinct purchase, rehab, resale, and refinance considerations.
Citywide figures are market context, not project-level underwriting. The lender still evaluates the subject property’s purchase price, scope of work, after-repair value, exit, and program eligibility.
Data source: U.S. Census Bureau QuickFacts — Irving, ACS 5-Year 2020–2024: total population, renter-occupied share of occupied housing units, median value of owner-occupied housing units, and median gross rent.
Distinct Irving submarkets, distinct project considerations.
Hard money lenders in Irving, TX underwrite very different projects across the city — cosmetic flips, full renovations, small multifamily repositions, and new construction. Purchase prices, renovation scope, resale depth, and refinance demand all shape each file.
Newer Stock and Light Rehab
Irving’s newer housing stock lends itself to bridge purchases and light rehabs rather than full renovations. The file is quick to stabilize, and the refinance into long-term financing is planned before closing.
Condominium and Association Projects
For Irving condominium projects, the association package — documents, budgets, rental rules — becomes part of underwriting next to the scope of work, with a resale as the typical exit.
Infill and Ground-Up Construction
Irving has infill and teardown opportunities that suit ground-up construction; leverage follows the builder’s completed projects and is capped against the completed value, with plans, budget, and exit reviewed next to the land.
Older Housing Stock
The older blocks of Irving are where full renovations live: roofs, systems, and structure alongside finishes, with a scope of work and contingency the lender reads line by line before releasing draws. The exit is usually a resale supported by nearby renovated comparables.
The Rental Refinance Exit
A steady Irving strategy is buy, renovate, rent, refinance — hard money for the purchase and work, then a DSCR loan on the leased property. Lendmire arranges both, so the refinance is planned before the note is funded.
The Urban Core
Where Irving concentrates density, hard money projects run to condominiums, townhomes, and attached stock. Association documents, master insurance, and rental rules come into the file with the scope of work, and the resale depth that makes the exit easy also makes the comparable sales unforgiving.
Eligible investment-property projects across the Irving area, from the core out to the surrounding towns, can also be reviewed; availability depends on the property, the program, and the current lending footprint.
What it looks like in this market.
Three composite projects showing how investors actually buy, renovate, and refinance here, each matched to the leverage tier and exit that fits.
Small multifamily, stabilized and refinanced
An Irving two-to-four-unit building with below-market rents is bought on a bridge loan, renovated unit by unit, and refinanced into DSCR financing once the rent roll is stabilized; the refinance is mapped before closing.
Fit: bridge or rehab · DSCR refinance exit
Infill construction, builder tier
An Irving infill build: land plus construction budget on one loan, leverage set by the builder’s completed projects and capped against the completed value, draws against inspected progress, and a resale or rental-refinance exit.
Fit: construction · completed-value cap
First flip, cosmetic scope
A first Irving project: a dated single-family purchase with a cosmetic budget, one loan for purchase and rehab at the first experience tier, draws released as work is inspected, and a resale to an owner-occupant at the accepted after-repair value.
Fit: purchase plus rehab · first-tier leverage
Four ways Irving investors can use hard money.
These are the core transaction paths available for eligible Irving investment properties. The right structure depends on the project, the after-repair value, the investor’s experience, credit, reserves, and current lender guidelines.
Fix-and-flip loans
Purchase and rehab close together as a single loan. The rehab dollars are drawn against inspected work, leverage follows the investor’s experience tier, and the after-repair value sets the ceiling.
Bridge purchase loans
For an Irving property that is not yet conventional-ready because of vacancy, condition, or timing, a bridge loan closes it at the bridge ceiling and a refinance into long-term financing repays the note once it is stabilized.
Cash-out and refinance
Access equity in a paid-off or lightly leveraged investment property for the next purchase or rehab, within the cash-out ceiling shown above; the sale or refinance that repays the note is reviewed with the loan.
Ground-up construction
Ground-up residential builds up to the unit count shown above; the builder’s completed projects set the leverage tier, the completed value caps it, and the construction budget is funded through draws.
Model an Irving project before requesting a quote.
The calculator preloads editable Irving sample assumptions for purchase price, rehab budget, and after-repair value, and its leverage tiers refresh from Lendmire’s centralized hard money standards source. Change any field; the result is a leverage estimate, not a loan offer.
Irving hard money calculator
Type in the purchase price, the rehab or build budget, and the after-repair value you expect the appraisal to support. What comes back is the estimated maximum loan at the selected experience tier, before closing costs and reserves.
Leverage tiers displayed here are the current program ceilings drawn from Lendmire’s centralized hard money standards source.
Starting assumptions for Irving are illustrative and come from the citywide median owner-occupied housing value. Edit any field.
An illustrative leverage estimate only — not a cost quote and not a loan offer. Leverage ceilings are outer bounds tiered by documented experience, and the loan amount, draw schedule, reserves, and eligibility that actually apply come from the appraisal, the scope of work, and full underwriting by the selected lender.
What lenders still review after the leverage math.
Leverage gets the attention, but the loan-to-cost ceiling is only one part of the file. A complete Irving hard money review also takes in the investor’s track record and liquidity, the property’s current and after-repair value, the scope of work, and the exit.
Same investment property, different point in its life.
Short-term and asset-based. The lender underwrites the purchase, the budget, the after-repair value, and the exit, tiers leverage by documented experience, and funds the rehab in draws. Built for property that is not yet stabilized.
Long-term financing that qualifies on cash flow. Once the property is renovated and leased, a DSCR loan measures the rent against the monthly payment — the usual take-out for a completed Irving hard money project.
Both products usually appear in one Irving project — hard money for the purchase and renovation, a DSCR refinance on the stabilized rent roll. Because Lendmire arranges both, the exit is settled before the first draw.
What to prepare for an Irving hard money review.
The exact list depends on the lender and the project; these four categories are a practical starting point before an investor requests a project-specific quote.
Treat this as a general preparation guide, not a universal document checklist. The selected lender may ask for additional information based on the property, borrower, entity, project, and underwriting findings.
Local details that can change the leverage decision.
Irving costs, property characteristics, and project logistics can materially change a hard money result or a property’s eligibility. Work through the practical issues below before relying on a target leverage or a projected after-repair value.
Use these checks to keep the Irving file clean and fundable.
Because treatment differs by lending partner, this is not a promise of a universal outcome; it spotlights the main issues an investor should settle before closing.
After-repair value support
Every leverage tier is capped against the after-repair value the lender accepts, which comes from an appraisal or valuation and recent comparable sales, not from the investor’s projection. Optimistic Irving value assumptions are the most common reason a file lands at a lower loan amount than expected.
Scope, budget, and draw inspections
The draw schedule comes from a line-item scope of work with a contingency, a contractor, and a realistic timeline. Because draws release only against completed, inspected work, a thin budget or a missing permit stops the project, not just the file.
Insurance during the project
A vacant or under-renovation Irving property needs builder’s-risk or vacant-property coverage rather than a standard landlord policy, and the lender is named on it. Coverage cost and availability belong in the carrying-cost budget before closing.
Entity vesting and title
Vesting in an LLC or other entity is common on business-purpose loans, with personal guarantees from the members. Have formation documents, ownership information, and clean title ready before closing so the entity never becomes the reason a closing slips.
The exit and the timeline
Because hard money is short-term, the sale or refinance that repays it has to land inside the term. When an Irving property will be held as a rental, mapping the DSCR refinance up front — seasoning, rent support, and leverage — keeps the exit from turning into a scramble at maturity.
From an Irving project to closing.
Start from the property and the plan, weigh the available structures, document the project, then move through underwriting to closing and the exit.
Run the project
Share the Irving property details, purchase price, budget, after-repair value, experience, credit range, and timing.
Compare partners
Lendmire compares multiple hard money and private money options for leverage, draw process, experience fit, and exit flexibility.
Document the project
Finish the appraisal or valuation, scope of work, contractor, insurance, title, entity, and asset documentation the lender requires.
Close and exit
Settle the structure, fund the purchase, draw against completed work, and complete the sale or the refinance on schedule.
A brokerage built around investor projects.
Projects across Irving span a first cosmetic flip, ground-up construction, and multi-property portfolios. Those files do not all belong with the same lender.
Partner comparison
Lendmire can compare multiple hard money and private money partners rather than forcing every Irving project into one lender’s leverage box.
Investor specialization
Leverage, experience tiers, draw mechanics, entity vesting, reserves, property type, and the exit that repays the note are the focus of the review.
The exit, planned early
Lendmire also arranges DSCR financing, so the refinance that repays the hard money note can be planned before the first draw is funded.
Trusted by buyers & investors alike.
Irving hard money loan FAQs
These answers address the purchase, rehab, construction, entity, leverage, and exit questions Irving investors commonly raise. Final program terms remain project-specific.
Can I use a hard money loan to buy an Irving fix-and-flip property?
Yes. Eligible Irving investment properties can be bought and renovated on a hard money loan through select lending partners: one loan for the purchase and the rehab budget, rehab funded in draws against completed work, and leverage tiered by documented experience and capped against the after-repair value in the current snapshot.
Do I need experience to get a hard money loan in Irving?
No — first-time investors are eligible. Leverage is tiered by documented completed projects, so a first project qualifies at a lower tier than an investor with a longer record. The current snapshot shows where each tier sits today, and the calculator lets you model an Irving project at your own tier.
What is the exit on an Irving hard money loan?
A sale once the renovation is complete, or a refinance into long-term financing — typically a DSCR loan on a rented Irving property. Lenders expect to see that path before closing, and because Lendmire arranges the DSCR refinance too, the exit is planned before the first draw.
How do I compare hard money lenders in Irving, TX?
Compare them on the things that change your outcome: the leverage tier your experience actually qualifies for, how rehab draws are inspected and released, how the after-repair value is established, which property types and Irving markets they accept, and how the exit is treated. Lendmire compares multiple hard money and private money partners on exactly those factors before a file is placed.
Can hard money fund ground-up construction in Irving?
Yes. Eligible ground-up residential builds in Irving can be financed up to the unit count in the snapshot, with leverage tiered by the builder’s completed projects and capped against the completed value; plans, budget, builder experience, and the exit are all reviewed with the land.
How is hard money different from a DSCR loan?
Hard money is short-term and asset-based: it funds the purchase and the renovation on the after-repair value and the plan, with leverage tiered by experience. A DSCR loan is long-term and cash-flow-based: it qualifies a rented property on its rental income. Many projects use both — hard money to renovate, DSCR to hold.
What documents does a hard money lender typically ask for?
Identification and credit authorization, entity documents when an LLC takes title, a list of completed projects, the purchase contract or payoff, a line-item scope of work and budget, contractor details, comparable sales behind the after-repair value, insurance, and evidence of the cash to close and reserves.
What should I submit for an Irving hard money quote?
Begin with the property address or market, the project type, the purchase price or payoff, the rehab or build budget, the expected after-repair value, your completed projects, the entity holding title, your credit range, and the timeline. From there a loan officer identifies what else the selected lender needs for an Irving file.
Is a hard money loan a consumer mortgage in Irving?
No — hard money and private money loans through Lendmire are business-purpose loans secured by non-owner-occupied Irving investment property, not consumer mortgages, and the property cannot be the borrower’s residence.
Can I refinance or take cash out of an Irving investment property with hard money?
Yes, within the cash-out and refinance ceiling shown in the current snapshot. Cash-out is commonly used to fund the next Irving acquisition or rehab, and the lender underwrites the exit on the cash-out loan the same way it does on a purchase.
Bring the Irving project. We will help structure the financing.
Start with a fix-and-flip, bridge purchase, cash-out, or ground-up construction scenario. No credit pull or commitment is required to request an initial review.
This page is Irving-specific — for guidelines and scenarios statewide, visit Hard Money Loans in Texas within Lendmire’s hard money loan program.
Nearby markets in Texas: Euless · Grapevine · Carrollton · Grand Prairie · Dallas · Lewisville · Arlington · North Richland Hills
Other loan programs in Irving: DSCR Loans in Irving, TX · Super Jumbo DSCR Loans in Irving, TX · Short-Term Rental Loans in Irving, TX · Investment Property Cash-Out Refinance in Irving, TX · Bank Statement Loans in Irving, TX · Super Jumbo Bank Statement Loans in Irving, TX · Bank Statement HELOC in Irving, TX · Investment Property HELOC in Irving, TX