Current Dallas hard money guidelines, updated from one source.
Every figure below renders from Lendmire’s centralized hard money standards source and refreshes automatically when program guidance changes. Final terms stay specific to the borrower, the property, the documented track record, and the selected lending partner.
Maximum loan-to-cost
Top tier for investors with five or more completed projects; 90% with two or more. First-time investors qualify at lower tiers.
Maximum bridge leverage
Purchase without rehab, measured against both the purchase price and the value. Property that needs time rather than work, refinanced once stabilized.
Maximum cash-out LTV
Cash-out and refinance ceiling against current value. Proceeds depend on the payoff, costs, the exit, and complete underwriting.
Minimum FICO
Additional conditions apply under 660. Underwriting is asset-based; the published floor does not by itself reach the top leverage tier.
Every fix-and-flip tier is separately capped at this share of the after-repair value.
Released in draws against completed, inspected work — not at closing.
Interest-only payments; no prepayment penalty.
Current standard-program snapshot · updated August 28, 2026. Loan amounts up to $5,000,000, larger by exception. Ground-up construction up to 90% of cost for builders with three or more completed projects, to 10 units. Figures are outer bounds, not offers; Lendmire is a mortgage broker, not a lender.
Business-purpose financing available in 41 markets, including Washington, D.C. In Dallas, Census estimates put the population near 1,307,930, the median owner-occupied value around $320.7K, median gross rent near $1,472, and renters in about 57.6% of households — market context for a hard money file, not project underwriting.
What a Dallas hard money loan is — and how the approval works.
A hard money loan is short-term, business-purpose financing secured by non-owner-occupied real estate. The lender does not lead with personal-income calculations; it leads with the property, the purchase price, the budget, the after-repair value, and the exit, then weighs the investor’s documented experience.
The asset and the plan lead the analysis
Underwriting turns on what the property is worth today, what it should be worth once the work is done, and whether the budget and timeline actually get it there. A stronger story can open more leverage.
Leverage is tiered by documented experience
The highest leverage tiers belong to investors with a record of completed projects. First-time investors qualify at lower tiers rather than being turned away, and the snapshot above shows where each tier stands today.
Rehab funds in draws, not at closing
The rehab portion of the loan funds as work is completed and inspected rather than at closing. Budget, scope, contractor, and draw schedule belong in the file from day one rather than being added later.
The exit is underwritten alongside the loan
The loan is repaid by a sale or by a refinance into long-term financing, and lenders expect to see that path before closing. Planning the refinance early is where a broker who works both products earns the fee.
Total project cost generally means the purchase price plus the rehab or build budget. Each experience tier caps loan-to-cost, and each tier is separately capped as a share of the after-repair value. The live program cards above show the current ceilings; the calculator below models your own Dallas project. The lender sets the final numbers from the appraisal, the scope of work, and the complete file.
A local market that supports several distinct project types.
Dallas brings together established neighborhoods, newer subdivisions, workforce housing, and blocks where older housing stock creates renovation demand. Each project type carries its own purchase, rehab, resale, and refinance considerations.
Citywide figures are market context, not project-level underwriting. The lender still evaluates the subject property’s purchase price, scope of work, after-repair value, exit, and program eligibility.
Data source: U.S. Census Bureau QuickFacts — Dallas, ACS 5-Year 2020–2024: total population, renter-occupied share of occupied housing units, median value of owner-occupied housing units, and median gross rent.
Distinct Dallas submarkets, distinct project considerations.
Hard money lenders in Dallas, TX see very different projects across the city: cosmetic flips, full renovations, small multifamily repositions, and new construction. Purchase prices, renovation scope, resale depth, and refinance demand all shape how each file is underwritten.
Newer Stock and Light Rehab
Newer Dallas subdivisions call for light rehabs and bridge purchases rather than gut renovations; the file stabilizes quickly and refinances into long-term financing on a schedule set before closing.
Condominium and Association Projects
For Dallas condominium projects, the association package — documents, budgets, rental rules — becomes part of underwriting next to the scope of work, with a resale as the typical exit.
Infill and Ground-Up Construction
Infill lots and teardowns in Dallas support ground-up construction, with leverage tiered by the builder’s completed projects and capped against the completed value. Plans, budget, and the exit are reviewed alongside the land value.
Older Housing Stock
In Dallas’ older housing stock, projects go past cosmetics into roofs, systems, and structure, so the budget and contingency are reviewed line by line and draws follow inspected work. Renovated comparables nearby carry the after-repair value.
The Rental Refinance Exit
In Dallas, many investors hold rather than sell: hard money funds the purchase and renovation, the property is leased, and a DSCR refinance repays the note. Arranging both loans in one place keeps the exit planned from the start.
The Urban Core
The dense core of Dallas trades in condominiums, townhomes, and attached product, so the association package — documents, master insurance, rental rules — sits next to the budget in underwriting. Plentiful comparable sales support the exit and discipline the after-repair value.
Lendmire can also review eligible investment-property projects across the Dallas area, from the core to the surrounding towns. Availability remains subject to the property, the program, and the current lending footprint.
What it looks like in this market.
Three composite projects built from how investors actually buy, renovate, and refinance here, each mapped to the leverage tier and exit that fits it.
Small multifamily, stabilized and refinanced
A Dallas two-to-four-unit building with below-market rents is bought on a bridge loan, renovated unit by unit, and refinanced into DSCR financing once the rent roll is stabilized; the refinance is mapped before closing.
Fit: bridge or rehab · DSCR refinance exit
Infill construction, builder tier
A builder with completed projects takes an infill lot in Dallas to a finished house, with leverage tiered by track record, capped against the completed value, and the build budget released in draws; the exit is a resale or a rental refinance.
Fit: construction · completed-value cap
First flip, cosmetic scope
A first Dallas project: a dated single-family purchase with a cosmetic budget, one loan for purchase and rehab at the first experience tier, draws released as work is inspected, and a resale to an owner-occupant at the accepted after-repair value.
Fit: purchase plus rehab · first-tier leverage
Four ways Dallas investors can use hard money.
Eligible Dallas investment properties can take several transaction paths. Which structure fits depends on the project, the after-repair value, the investor’s experience, credit, reserves, and current lender guidelines.
Fix-and-flip loans
One loan covers the purchase and the rehab budget, with the rehab released in draws against completed work; the experience tier sets the leverage and the after-repair value caps it.
Bridge purchase loans
Close on a Dallas property that needs time rather than work — vacancy, condition, or a seller who will not wait for a conventional file — and refinance into long-term financing once it is stabilized.
Cash-out and refinance
Pull equity from a free-and-clear or low-leverage investment property to fund the next acquisition or rehab, at the cash-out ceiling shown in the current snapshot, with the exit underwritten alongside the loan.
Ground-up construction
Residential new builds up to the unit count shown in the snapshot, with leverage set by the builder’s completed projects and capped against the completed value, and the build budget funded in draws.
Model a Dallas project before requesting a quote.
The calculator starts with editable Dallas sample assumptions for purchase price, rehab budget, and after-repair value. Leverage tiers refresh from Lendmire’s centralized hard money standards source. Every field remains editable, and the result is a leverage estimate, not a loan offer.
Dallas hard money calculator
Type in the purchase price, the rehab or build budget, and the after-repair value you expect the appraisal to support. What comes back is the estimated maximum loan at the selected experience tier, before closing costs and reserves.
Leverage tiers displayed here are the current program ceilings drawn from Lendmire’s centralized hard money standards source.
Illustrative Dallas starting assumptions are derived from the citywide median owner-occupied housing value. All fields are editable.
This is an illustrative leverage estimate, not a cost quote or a loan offer. The ceilings are outer bounds tiered by documented experience; the actual loan amount, draw schedule, reserves, and eligibility are set by the appraisal, the scope of work, and complete underwriting by the selected lender.
What lenders still review after the leverage math.
The loan-to-cost ceiling is the headline, but it is only one part of the file. A complete Dallas hard money review also covers the investor’s track record and liquidity, the property’s current and after-repair value, the scope of work, and the exit.
Same investment property, different point in its life.
Short-term and asset-based. The lender underwrites the purchase, the budget, the after-repair value, and the exit, tiers leverage by documented experience, and funds the rehab in draws. Built for property that is not yet stabilized.
Long-term and rent-based: after the renovation is finished and the property is leased, a DSCR loan qualifies on the rental income relative to the payment, which is how most completed Dallas hard money projects are repaid.
Both products usually appear in one Dallas project — hard money for the purchase and renovation, a DSCR refinance on the stabilized rent roll. Because Lendmire arranges both, the exit is settled before the first draw.
What to prepare for a Dallas hard money review.
Documentation varies by lender and project, but these four categories give an investor a practical starting point before requesting a project-specific quote.
Treat this as a general preparation guide, not a universal document checklist. The selected lender may ask for additional information based on the property, borrower, entity, project, and underwriting findings.
Local details that can change the leverage decision.
Costs, property characteristics, and project logistics particular to Dallas can materially change a hard money result or a property’s eligibility. Go through the practical issues below before relying on a target leverage or a projected after-repair value.
Use these checks to keep the Dallas file clean and fundable.
Because treatment varies by lending partner, the goal here is not to promise a universal outcome but to spotlight the main issues an investor should resolve before closing.
After-repair value support
Every leverage tier is capped against the after-repair value the lender accepts, which comes from an appraisal or valuation and recent comparable sales, not from the investor’s projection. Optimistic Dallas value assumptions are the most common reason a file lands at a lower loan amount than expected.
Scope, budget, and draw inspections
A line-item scope of work with a contingency, a contractor, and a realistic timeline sets the draw schedule. Draws are released against completed, inspected work, so it is a thin budget or a missing permit, not the paperwork, that stalls a project.
Insurance during the project
An empty or mid-renovation Dallas property is covered by builder’s-risk or vacant-property insurance rather than a standard landlord policy, with the lender named. Price that coverage into the carrying costs before closing.
Entity vesting and title
Business-purpose loans are commonly vested in an LLC or other entity, with personal guarantees from the members. Formation documents, ownership information, and clean title should be in hand before closing so the entity does not become the reason a closing slips.
The exit and the timeline
Hard money is short-term, so the sale or refinance that repays it has to fit inside the term. For a Dallas property that will be rented, planning the DSCR refinance at the start — seasoning, rent support, and leverage — keeps the exit from becoming a scramble when the note comes due.
From a Dallas project to closing.
Lead with the property and the plan, weigh the available structures, document the project, and move through underwriting toward closing and the exit.
Run the project
Send the Dallas property details — purchase price, budget, after-repair value, experience, credit range, and the planned exit.
Compare partners
Multiple hard money and private money options are compared on leverage, draw mechanics, experience fit, and how flexible the exit is.
Document the project
Finish the appraisal or valuation, scope of work, contractor, insurance, title, entity, and asset documentation the lender requires.
Close and exit
Lock the structure, fund the purchase, draw against inspected work, and carry out the sale or refinance that retires the note.
A brokerage built around investor projects.
Dallas projects range from a first cosmetic flip to ground-up construction and multi-property portfolios. Those files do not all belong with the same lender.
Partner comparison
Lendmire compares multiple hard money and private money partners rather than forcing every Dallas project into one institution’s box.
Investor specialization
Leverage, experience tiers, draw mechanics, entity vesting, reserves, property type, and the exit strategy are the focus of the review.
The exit, planned early
Lendmire also arranges DSCR financing, so the refinance that repays the hard money note can be planned before the first draw is funded.
Trusted by buyers & investors alike.
Dallas hard money loan FAQs
Purchase, rehab, construction, entity, leverage, and exit questions come up constantly from Dallas investors; the answers below address them. Final program terms remain project-specific.
Can I use a hard money loan to buy a Dallas fix-and-flip property?
Yes. Eligible Dallas investment properties can be bought and renovated with a hard money loan through select lending partners: purchase and rehab budget close as one loan, the rehab is released in draws against inspected work, and leverage follows the experience tier shown in the snapshot above.
Do I need experience to get a hard money loan in Dallas?
No. First-time investors are eligible; leverage simply steps up with documented completed projects, so a first project starts at a lower tier than a seasoned investor’s. The snapshot shows today’s tiers, and the calculator models a Dallas project at your tier.
What is the exit on a Dallas hard money loan?
A sale once the renovation is complete, or a refinance into long-term financing — typically a DSCR loan on a rented Dallas property. Lenders expect to see that path before closing, and because Lendmire arranges the DSCR refinance too, the exit is planned before the first draw.
How do I compare hard money lenders in Dallas, TX?
Focus on what changes your result: the leverage tier your track record qualifies for, how rehab draws are inspected and released, how the after-repair value is set, which property types and Dallas markets are accepted, and how the exit is treated. Lendmire weighs multiple hard money and private money partners on those factors before placing a file.
Can hard money fund ground-up construction in Dallas?
Yes. Eligible ground-up residential builds in Dallas can be financed up to the unit count in the snapshot, with leverage tiered by the builder’s completed projects and capped against the completed value; plans, budget, builder experience, and the exit are all reviewed with the land.
How long is a hard money loan?
Hard money is short-term: the current snapshot shows the term range, payments are interest-only during the term, and the current program carries no prepayment penalty. It is designed to be repaid by the exit — a sale or a refinance — not carried for years.
What should I submit for a Dallas hard money quote?
The property address or market, the project type, the purchase price or payoff, the rehab or build budget, the expected after-repair value, your completed projects, the entity that will take title, your credit range, and the timeline. A loan officer then identifies what else the Dallas file needs.
What documents does a hard money lender typically ask for?
Expect identification and credit authorization, entity documents for an LLC, a record of completed projects, the purchase contract or payoff, a line-item scope of work and budget, contractor information, comparable sales behind the after-repair value, proof of the cash to close, and insurance and title information. The lender may request more based on the project.
Does the after-repair value come from my estimate?
No — the lender sets the after-repair value from an appraisal or valuation and recent comparable sales, not from the investor’s projection. Build your own estimate the same way, because every leverage tier is capped against the value the lender accepts.
How are rehab draws funded?
The rehab portion of the loan is held back at closing and released against completed work, usually after an inspection or documented progress. The draw schedule is agreed up front from the scope of work, which is why a line-item budget and a contractor are part of the file from the start.
Bring the Dallas project. We will help structure the financing.
Begin with a fix-and-flip, bridge purchase, cash-out, or ground-up construction scenario. No credit pull or commitment is required to request an initial review.
This page is Dallas-specific — for guidelines and scenarios statewide, visit Hard Money Loans in Texas within Lendmire’s hard money loan program.
Nearby markets in Texas: Mesquite · Garland · Irving · Richardson · DeSoto · Rowlett · Carrollton · Grand Prairie
Other loan programs in Dallas: DSCR Loans in Dallas, TX · Super Jumbo DSCR Loans in Dallas, TX · Short-Term Rental Loans in Dallas, TX · Investment Property Cash-Out Refinance in Dallas, TX · Bank Statement Loans in Dallas, TX · Super Jumbo Bank Statement Loans in Dallas, TX · Bank Statement HELOC in Dallas, TX · Investment Property HELOC in Dallas, TX