Current Arlington hard money guidelines, updated from one source.
The figures below display from one centralized hard money standards source and move when program guidance moves. Final terms still depend on the borrower, the property, the documented track record, and the lending partner selected.
Maximum loan-to-cost
Top tier for investors with five or more completed projects; 90% with two or more. First-time investors qualify at lower tiers.
Maximum bridge leverage
Purchase without rehab, measured against both the purchase price and the value. Property that needs time rather than work, refinanced once stabilized.
Maximum cash-out LTV
Cash-out and refinance ceiling against current value. Proceeds depend on the payoff, costs, the exit, and complete underwriting.
Minimum FICO
Additional conditions apply under 660. Underwriting is asset-based; the published floor does not by itself reach the top leverage tier.
Every fix-and-flip tier is separately capped at this share of the after-repair value.
Released in draws against completed, inspected work — not at closing.
Interest-only payments; no prepayment penalty.
Current standard-program snapshot · updated August 28, 2026. Loan amounts up to $5,000,000, larger by exception. Ground-up construction up to 90% of cost for builders with three or more completed projects, to 10 units. Figures are outer bounds, not offers; Lendmire is a mortgage broker, not a lender.
Business-purpose financing available in 40 markets, including Washington, D.C. By Census estimate, Arlington has roughly 397,742 residents, a median owner-occupied value of about $304.7K, median gross rent around $1,470, and renter households near 45.7% — context for a hard money file, not project underwriting.
What an Arlington hard money loan is — and how the approval works.
A hard money loan is short-term, business-purpose financing secured by non-owner-occupied real estate. Rather than qualifying the file primarily on personal-income calculations, the lender begins with the property, the purchase price, the budget, the after-repair value, and the exit — and then weighs the investor’s documented experience.
The asset and the plan lead the analysis
Underwriting turns on what the property is worth today, what it should be worth once the work is done, and whether the budget and timeline actually get it there. A stronger story can open more leverage.
Leverage is tiered by documented experience
The highest leverage tiers belong to investors with a record of completed projects. First-time investors qualify at lower tiers rather than being turned away, and the snapshot above shows where each tier stands today.
Rehab funds in draws, not at closing
The rehab portion pays out as work is finished and inspected, not at the closing table. That is why the budget, the scope, the contractor, and the draw schedule are in the file from the beginning.
The exit is underwritten alongside the loan
A sale or a refinance into long-term financing is how the note gets repaid. Lenders want to see that path before closing — and planning the refinance early is where a broker who works both products earns the fee.
Total project cost generally means the purchase price plus the rehab or build budget. Loan-to-cost is limited by the investor’s experience tier, with every tier also capped as a share of the after-repair value. The live program cards above carry the current ceilings, and the calculator below models your own Arlington project. The lender sets the final numbers from the appraisal, the scope of work, and the complete file.
A local market that supports several distinct project types.
Arlington spans established neighborhoods, newer subdivisions, workforce housing, and older blocks where renovation demand is constant. Each project type comes with distinct purchase, rehab, resale, and refinance considerations.
These citywide figures give general market context and are not project-level underwriting. Purchase price, scope of work, after-repair value, exit, and program eligibility are still evaluated on the subject property.
Data source: U.S. Census Bureau QuickFacts — Arlington, ACS 5-Year 2020–2024: total population, renter-occupied share of occupied housing units, median value of owner-occupied housing units, and median gross rent.
Distinct Arlington submarkets, distinct project considerations.
Hard money lenders in Arlington, TX underwrite very different projects across the city — cosmetic flips, full renovations, small multifamily repositions, and new construction. Purchase prices, renovation scope, resale depth, and refinance demand all shape each file.
The Suburban Ring
The suburban ring around Arlington sells finished houses to families, so full renovations are underwritten to that resale, and a bridge purchase covers the house that needs time rather than work.
Newer Stock and Light Rehab
In the newer parts of Arlington, projects are lighter — cosmetic work or a bridge purchase on a house that needs time rather than construction — and the exit is typically a refinance into long-term financing once the property is stabilized.
Condominium and Association Projects
For Arlington condominium projects, the association package — documents, budgets, rental rules — becomes part of underwriting next to the scope of work, with a resale as the typical exit.
Infill and Ground-Up Construction
Ground-up construction on Arlington infill lots is underwritten on the completed value and the builder’s track record, with the plans, the budget, and the exit reviewed together with the land value.
Older Housing Stock
The older blocks of Arlington are where full renovations live: roofs, systems, and structure alongside finishes, with a scope of work and contingency the lender reads line by line before releasing draws. The exit is usually a resale supported by nearby renovated comparables.
The Rental Refinance Exit
Buy, renovate, lease, refinance is a repeatable Arlington play: hard money carries the purchase and the work, and a DSCR loan on the leased property repays it — both arranged in one place, so the exit is planned first.
Lendmire can also review eligible investment-property projects across the Arlington area, core to surrounding towns. Availability remains subject to the property, the program, and the current lending footprint.
What it looks like in this market.
Three composite projects built from how investors actually buy, renovate, and refinance here, each mapped to the leverage tier and exit that fits it.
Small multifamily, stabilized and refinanced
On an Arlington small multifamily reposition, hard money funds the acquisition and the unit turns, and a DSCR refinance on the stabilized rent roll repays the note — Lendmire arranges both, so the exit is planned up front.
Fit: bridge or rehab · DSCR refinance exit
Infill construction, builder tier
An Arlington infill build: land plus construction budget on one loan, leverage set by the builder’s completed projects and capped against the completed value, draws against inspected progress, and a resale or rental-refinance exit.
Fit: construction · completed-value cap
First flip, cosmetic scope
An investor with no completed projects takes down a tired single-family house in Arlington, funds purchase and rehab in one loan at the first tier, draws as the work passes inspection, and exits by resale at the after-repair value the lender accepted.
Fit: purchase plus rehab · first-tier leverage
Four ways Arlington investors can use hard money.
Eligible Arlington investment properties can take several transaction paths. Which structure fits depends on the project, the after-repair value, the investor’s experience, credit, reserves, and current lender guidelines.
Fix-and-flip loans
One loan covers the purchase and the rehab budget, with the rehab released in draws against completed work; the experience tier sets the leverage and the after-repair value caps it.
Bridge purchase loans
Take down an Arlington property that needs time rather than construction — a vacancy, a condition item, a seller who will not wait for conventional financing — and refinance into long-term financing once it is stabilized.
Cash-out and refinance
Access equity in a paid-off or lightly leveraged investment property for the next purchase or rehab, within the cash-out ceiling shown above; the sale or refinance that repays the note is reviewed with the loan.
Ground-up construction
Residential new builds up to the unit count shown in the snapshot, with leverage set by the builder’s completed projects and capped against the completed value, and the build budget funded in draws.
Model an Arlington project before requesting a quote.
Start from editable Arlington sample assumptions for purchase price, rehab budget, and after-repair value, with leverage tiers that refresh from Lendmire’s centralized hard money standards source. Every field is editable, and the result is a leverage estimate, not a loan offer.
Arlington hard money calculator
Provide the purchase price, the rehab or build budget, and the after-repair value you expect the appraisal to support; the calculator returns the estimated maximum loan for the selected experience tier, before closing costs and reserves.
Leverage tiers displayed here are the current program ceilings drawn from Lendmire’s centralized hard money standards source.
The Arlington starting assumptions are illustrative, derived from the citywide median owner-occupied housing value; every field is editable.
An illustrative leverage estimate only — not a cost quote and not a loan offer. Leverage ceilings are outer bounds tiered by documented experience, and the loan amount, draw schedule, reserves, and eligibility that actually apply come from the appraisal, the scope of work, and full underwriting by the selected lender.
What lenders still review after the leverage math.
Leverage gets the attention, but the loan-to-cost ceiling is only one part of the file. A complete Arlington hard money review also takes in the investor’s track record and liquidity, the property’s current and after-repair value, the scope of work, and the exit.
Same investment property, different point in its life.
Short-term and asset-based. The lender underwrites the purchase, the budget, the after-repair value, and the exit, tiers leverage by documented experience, and funds the rehab in draws. Built for property that is not yet stabilized.
Long-term financing that qualifies on cash flow. Once the property is renovated and leased, a DSCR loan measures the rent against the monthly payment — the usual take-out for a completed Arlington hard money project.
Both products usually appear in one Arlington project — hard money for the purchase and renovation, a DSCR refinance on the stabilized rent roll. Because Lendmire arranges both, the exit is settled before the first draw.
What to prepare for an Arlington hard money review.
The exact list varies, but these four categories are a practical starting point for an investor before requesting a project-specific quote.
This is a general preparation guide rather than a universal document checklist. The selected lender may request additional information based on the property, borrower, entity, project, and underwriting findings.
Local details that can change the leverage decision.
Costs, property characteristics, and project logistics particular to Arlington can materially change a hard money result or a property’s eligibility. Go through the practical issues below before relying on a target leverage or a projected after-repair value.
Use these checks to keep the Arlington file clean and fundable.
The exact treatment varies by lending partner, so the goal here is not to promise a universal outcome. It is to spotlight the main issues an investor should resolve before closing.
After-repair value support
The lender’s after-repair value — from an appraisal or valuation and recent comparable sales — caps every leverage tier, and it will not match an optimistic projection. In Arlington files, an unsupported value is the most frequent reason the loan comes in below expectations.
Scope, budget, and draw inspections
A line-item scope of work with a contingency, a contractor, and a realistic timeline sets the draw schedule. Draws are released against completed, inspected work, so a thin budget or a missing permit stalls the project rather than the paperwork.
Coastal insurance, flood, and wind
Coastal Arlington projects add wind and flood exposure to the builder’s-risk or vacant-property coverage the lender requires. Premiums, deductibles, and availability change the carrying-cost budget and can affect the rental refinance that repays the note, so settle the insurance picture before closing.
Entity vesting and title
Vesting in an LLC or other entity is common on business-purpose loans, with personal guarantees from the members. Have formation documents, ownership information, and clean title ready before closing so the entity never becomes the reason a closing slips.
The exit and the timeline
Hard money is short-term, so the sale or refinance that repays it has to land inside the term. For an Arlington property that will be rented, planning the DSCR refinance at the start — seasoning, rent support, leverage — keeps the exit from becoming a scramble when the note comes due.
From an Arlington project to closing.
Lead with the property and the plan, weigh the available structures, document the project, and move through underwriting toward closing and the exit.
Run the project
Send the Arlington property details, purchase price, budget, after-repair value, experience, credit range, and timing.
Compare partners
Multiple hard money and private money options are compared on leverage, draw mechanics, experience fit, and how flexible the exit is.
Document the project
Complete the appraisal or valuation, scope of work, contractor, insurance, title, entity, and asset documentation the lender requires.
Close and exit
Settle the structure, fund the purchase, draw against completed work, and complete the sale or the refinance on schedule.
A brokerage built around investor projects.
Arlington projects range from a first cosmetic flip to ground-up construction and multi-property portfolios. Those files do not all belong with the same lender.
Partner comparison
Instead of forcing every Arlington project into a single lender’s leverage box, Lendmire compares multiple hard money and private money partners.
Investor specialization
The review centers on leverage, experience tiers, draw mechanics, entity vesting, reserves, property type, and the exit strategy.
The exit, planned early
Because Lendmire also arranges DSCR financing, the refinance that repays the hard money note can be planned before the purchase closes.
Trusted by buyers & investors alike.
Arlington hard money loan FAQs
The answers below take up the purchase, rehab, construction, entity, leverage, and exit questions Arlington investors commonly raise. Final program terms remain project-specific.
Can I use a hard money loan to buy an Arlington fix-and-flip property?
Yes — eligible Arlington investment properties can be purchased and renovated with a hard money loan through select lending partners. The purchase and the rehab budget close as one loan, the rehab funds in draws against completed work, and leverage is tiered by documented experience and capped against the after-repair value shown in the current snapshot.
What is the exit on an Arlington hard money loan?
A sale once the renovation is complete, or a refinance into long-term financing — typically a DSCR loan on a rented Arlington property. Lenders expect to see that path before closing, and because Lendmire arranges the DSCR refinance too, the exit is planned before the first draw.
How do I compare hard money lenders in Arlington, TX?
Focus on what changes your result: the leverage tier your track record qualifies for, how rehab draws are inspected and released, how the after-repair value is set, which property types and Arlington markets are accepted, and how the exit is treated. Lendmire weighs multiple hard money and private money partners on those factors before placing a file.
Do I need experience to get a hard money loan in Arlington?
No — first-time investors are eligible. Leverage is tiered by documented completed projects, so a first project qualifies at a lower tier than an investor with a longer record. The current snapshot shows where each tier sits today, and the calculator lets you model an Arlington project at your own tier.
Does coastal insurance affect an Arlington hard money project?
It can — wind, flood, and builder’s-risk coverage on a coastal Arlington property raise carrying costs and can change the exit, particularly when the take-out is a rental refinance. Lenders want that insurance picture settled before closing, not uncovered mid-project.
Can hard money fund ground-up construction in Arlington?
Yes. Eligible ground-up residential builds in Arlington are financed up to the unit count in the snapshot, with leverage set by the builder’s completed projects and capped against the completed value. Plans, budget, builder information, and the exit are reviewed with the land value.
Does the after-repair value come from my estimate?
No. The lender establishes the after-repair value from an appraisal or valuation and comparable sales, not from the investor’s projection. Your estimate should be built the same way — recent, nearby, comparable sales — because every leverage tier is capped against the value the lender accepts.
How is hard money different from a DSCR loan?
Hard money is short-term and asset-based, funding the purchase and the renovation on the after-repair value and the plan with experience-tiered leverage. A DSCR loan is long-term and cash-flow-based, qualifying a rented property on its rental income. Many projects use both: hard money to renovate, DSCR to hold.
Can I close an Arlington hard money loan in an LLC?
Yes — business-purpose hard money loans are commonly vested in an LLC, corporation, or partnership, and individual investors are eligible as well. Formation documents, ownership information, and personal guarantees are typically part of the file, and the closing team confirms the Arlington title and entity requirements.
What should I submit for an Arlington hard money quote?
Start with the property address or market, the project type, the purchase price or payoff, the rehab or build budget, the expected after-repair value, your completed projects, the entity that will hold title, your credit range, and the timeline. A loan officer can then identify the additional documents the selected lender needs for an Arlington file.
Bring the Arlington project. We will help structure the financing.
Bring a fix-and-flip, bridge purchase, cash-out, or ground-up construction scenario. No credit pull or commitment is required to request an initial review.
This page is Arlington-specific — for guidelines and scenarios statewide, visit Hard Money Loans in Texas within Lendmire’s hard money loan program.
Also in Arlington: DSCR Loans in Arlington, TX