Current conventional guidelines, updated from one source.
Treat these as the program’s fixed points rather than an offer: the minimum down payment for a first-time buyer and for everyone else, the credit floor behind these pages, the leverage at which mortgage insurance begins and the points at which it ends, and the ratio an automated approval allows.
First-time buyer; 5% standard; 97% loan-to-value at the top
The agencies set the floor at 3% down for a first-time buyer and 5% for a repeat buyer, on a principal residence; the whole down payment may be a gift from a relative on a one-unit home, and twenty percent down removes mortgage insurance from the payment entirely.
Priced on the score; no agency minimum with an automated approval
620 is the working floor, a wholesale overlay rather than an agency rule, since Fannie Mae requires no minimum score for a loan the automated system approves and 620 only on a manual fixed-rate file. Above the floor, each step up in score lowers the cost of the loan and of the insurance.
Required above 80% LTV; removed at 80% by request, 78% automatically
Private mortgage insurance applies above 80% loan-to-value. Fannie Mae’s 2022 figures put the annual cost in a range of 0.58%–1.86%, depending on the score and the leverage. It ends by request at 80% of the original value, automatically at 78%, and no later than the midpoint of the term.
With an automated approval; 36% to 45% on a manual file
An automated approval allows a total debt-to-income ratio up to 50%; a manually underwritten file is held to 36%, or 45% when credit score and reserves meet the agencies’ matrix. The ratio divides total housing payment plus other monthly obligations by gross income.
| Purpose | Occupancy and program | Maximum LTV |
|---|---|---|
| Purchase | One-unit principal residence, first-time buyer (fixed rate) | 97% |
| Purchase | One-unit principal residence, standard | 95% |
| Purchase | HomeReady / Home Possible (income limits apply) | 97% |
| Purchase | Two- to four-unit principal residence | 95% |
| Purchase | Second home | 90% |
| Purchase | Investment property, one unit | 85% |
| Purchase | Investment property, two to four units | 75% |
| Refinance | Limited cash-out (rate-and-term), one-unit principal residence | 95% |
| Refinance | Cash-out, one-unit principal residence | 80% |
| Refinance | Cash-out, two to four units, second home or investment | 75% |
| Combined LTV | Maximum contribution |
|---|---|
| above 90 percent | 3% of the sales price |
| 75.01 to 90 percent | 6% of the sales price |
| 75 percent or less | 9% of the sales price |
| investment property (any) | 2% of the sales price |
| Event | Waiting period |
|---|---|
| Chapter 7 or 11 bankruptcy | four years from discharge or dismissal (two years with documented extenuating circumstances) |
| Chapter 13 bankruptcy | two years from discharge; four years from dismissal (two with extenuating circumstances) |
| Multiple bankruptcy filings | five years when more than one filing within the past seven years |
| Foreclosure | seven years (three with extenuating circumstances, then limited to a principal residence or second home at 90 percent LTV, purchase or limited cash-out) |
| Deed-in-lieu, short sale or mortgage charge-off | four years (two with extenuating circumstances) |
Mortgage insurance: Fannie Mae reports that private mortgage insurance typically ranged from 0.58%–1.86% of the loan amount a year; the premium on a specific loan is priced by the insurer on the score, the leverage, and the coverage, and is never quoted here. Gifts from relatives may fund the entire down payment on a one-unit principal residence. HomeReady and Home Possible lend to 97% with income at or below 80% of the area median; HomeOne lends to the same leverage with a first-time buyer and no income limit.
Current conventional snapshot · updated October 3, 2026 · principal residences occupied within sixty days, second homes, and one- to four-unit investment properties · conforming limits apply by county and are confirmed by a Lendmire loan officer · above the limit, see the jumbo program · no prepayment penalty · Lendmire is a broker, never the lender.
For informational purposes only. This is not a commitment to lend or extend credit, an offer, or a quote. Program parameters shown are Fannie Mae and Freddie Mac guidelines and wholesale lender overlays, are subject to change without notice, and every figure depends on the borrower, the property, the occupancy, the automated underwriting finding, and full underwriting. Mortgage insurance figures are published typical ranges and editable estimates, not premium quotes. Conforming loan limits apply by county. Lendmire is a mortgage broker, not a lender. Licensed in sixteen states for consumer mortgages. NMLS #2371349.
What a conventional loan is — and how the file is qualified.
A conventional loan is a mortgage written to the rules of Fannie Mae and Freddie Mac so a lender can sell it to them after closing. Those rules decide the leverage by occupancy, the credit standard, the insurance above the threshold, and the ratios, and the four cards below take a Gilroy file apart along exactly those lines.
For the program overview, see Lendmire’s conventional loan program, or the statewide guide at Conventional Loans in California; for the mortgage insurance cancellation rules, see the CFPB.
Leverage by occupancy and buyer
The agencies lend most on a home the borrower lives in and less as the occupancy changes: a one-unit principal residence reaches the top leverage, with the first-time buyer’s minimum the lowest down payment in the program; two- to four-unit homes, second homes, and investment properties step down from there, as the table in the snapshot shows for a Gilroy buyer.
Credit scores and automated underwriting
What the score does on a Gilroy conventional file is set the cost. A lower score raises the loan-level adjustments and the insurance premium; a higher score lowers both. Manual underwriting, used when the automated system cannot approve the file, carries its own minimum score and tighter ratios.
Mortgage insurance that cancels
Twenty percent down means no mortgage insurance at all, and anything less means insurance for a while. The calculator on this page shows the Gilroy payment with the estimated premium and the payment after it ends, along with the month on the amortization schedule when the request and automatic thresholds arrive.
Ratios, reserves, and the DU finding
The automated finding is the hinge of a conventional file: it reads the income, the assets, the credit, and the property, allows a total debt ratio up to the automated maximum, and names the reserves the file must show. A Gilroy underwriter then verifies what the finding assumed.
Every input below is yours: the Gilroy price, the down payment, the buyer type, the term, the rate, the insurance estimate, and the escrows. The thresholds and the ratio ceiling come from the program; the payment, the insurance, and the cancellation month follow from the arithmetic.
Where Gilroy buyers borrow — and how a conforming loan fits.
Conventional loans are sized against a local market, and these are Gilroy’s numbers from the U.S. Census Bureau: how many households own, what a typical home is worth, and what households earn. Together they set the scale of a typical down payment, loan, and insurance premium.
Citywide figures provide general market context, not an appraisal or an income calculation. Higher values mean a larger down payment in dollars and a larger insurance premium; lower values mean a payment that leaves more room under the ratio ceiling. The percentages do not move; what they amount to does.
Data sources: U.S. Census Bureau — ACS 5-Year (2024) housing and population estimates, including tenure, home values, gross rents, and household income.
Distinct Gilroy neighborhoods, distinct conventional files.
One program, several Gilroy submarkets: the cards below describe the housing stock, the price range, and the conventional question that comes up most often in each.
Rural-edge and acreage properties
A Gilroy property with land qualifies as a residence. Fewer comparable sales mean a more careful appraisal, and outbuildings beyond residential use are not added to the value. Roughly 10,889 Gilroy households own their homes on the latest Census estimate — 62% of all households, the pool a conventional purchase joins.
Newer subdivisions on the bypass
On a new Gilroy home the appraisal is usually uneventful and the ratio decides the file. Twenty percent down removes the insurance and lowers the ratio at the same time. On a one-unit principal residence at Gilroy’s median value, the first-time buyer’s minimum down payment comes to about $30,800 and the standard minimum to about $51,400 — before closing costs, and before the mortgage insurance that comes with either; a second home, a multi-unit home, or a rental starts higher, as the leverage table shows.
In-town neighborhoods
In Gilroy’s older neighborhoods the value report decides more than the condition report. A buyer at the first-time-buyer minimum pays insurance for a while; a buyer at twenty percent pays none. The median owner-occupied home value in Gilroy runs near $1,027,400 on the latest Census estimate.
High values and the conforming limit
A Gilroy home near the top of the conforming range is still a conventional file when the loan fits under the limit; above it the jumbo lanes take over with their own floors, and the county limit decides which side of the line a given Gilroy purchase falls on. Gilroy is home to about 59K people.
Manufactured homes
The agencies will buy a loan on a Gilroy manufactured home that meets their requirements, confirmed by the appraisal; the leverage is set for the property type, and the insurance follows the leverage as it would on any conventional loan. Median household income in Gilroy sits near $133,107 on the latest Census estimate.
Multi-unit conversions
One side occupied, the other side’s rent counted within the program’s rules: that is the Gilroy duplex on a conventional loan, at the multi-unit leverage rather than the single-family one. About 38% of Gilroy’s households rent — roughly 6,570 renter households on the latest Census estimate.
What the program accepts is the same everywhere in Gilroy: houses, warrantable condominiums, planned developments, manufactured homes that meet the agencies’ rules, two- to four-unit homes, second homes, and investment property, each at its own leverage. What it declines is the non-warrantable project and the loan above the conforming limit, which belong to other programs.
Four ways Gilroy buyers put a conforming loan to work.
The conventional loan is one of the broadest mortgage programs there is: it buys a first home with a small down payment, a move-up home with cancellable insurance, a second home, and a rental, and it refinances all of them. The cards below are the uses that bring Gilroy borrowers to it most.
Buy a first home at the first-time-buyer minimum
A Gilroy buyer who has not owned a home in three years qualifies for the program’s smallest down payment on a one-unit principal residence with a fixed rate; the down payment can be a gift from a relative, the seller can pay closing costs within the cap, and the insurance cancels as equity grows.
Buy with twenty percent down and no insurance
The move-up Gilroy buyer selling one home and bringing twenty percent to the next usually lands here: no mortgage insurance, the strongest cost tier the score earns, and a loan the automated system reviews with the equity brought forward counted in the file.
Buy a condominium in a warrantable project
A Gilroy condominium is a conventional purchase when the project passes the agencies’ review: owner-occupancy mix, budget and reserves, litigation, commercial space, and ownership concentration. The dues enter the ratio, and the leverage follows the occupancy as it would on a house.
Refinance or take cash out
A Gilroy owner can refinance a conventional loan two ways: a limited cash-out refinance to the rate-and-term leverage in the snapshot, or a cash-out refinance to the lower cash-out leverage after the seasoning period, on a principal residence, second home, or rental at each occupancy’s own limit.
Estimate the payment on a Gilroy price before requesting a quote.
Enter a Gilroy price, the down payment, and the buyer type, choose a term, and the calculator returns the loan and its loan-to-value, principal and interest, the estimated mortgage insurance while the loan is above the threshold, taxes and insurance, the payment after the insurance ends, and the ratio if you enter income. It also shows the month the balance reaches the cancellation thresholds. The rate field holds the weekly Freddie Mac benchmark as a market reference, never a quote.
Gilroy conventional payment estimate
Seeded with a Gilroy price and the first-time buyer’s minimum down; every field updates the result as you type.
Editable benchmark: 7.28% as of October 1, 2026 · Freddie Mac 30-year average via FRED®. A conventional market reference, not a conventional loan quote.
Estimate seeded at the low end of Fannie Mae’s published range (0.58%–1.86% a year); the insurer prices the actual premium on the score and the leverage. Applies only above 80% loan-to-value.
Illustrative starting assumptions: a $750,000 price (the highest price the example uses, which sits below Gilroy’s median owner-occupied home value), the first-time buyer’s minimum down payment, a thirty-year term at the current Freddie Mac benchmark, mortgage insurance at the low end of Fannie Mae’s published range, property taxes and insurance estimated for California (U.S. Census Bureau). Every field is editable.
Illustrative estimate only — not a Loan Estimate, approval, quote, or commitment to lend. The rate field carries the weekly Freddie Mac thirty-year conventional benchmark, a market reference and not a conventional loan quote; your rate is set by the lender at lock. The mortgage insurance figure is an editable estimate seeded from Fannie Mae’s published typical range, not a premium quote; the insurer prices the actual premium, and the cancellation month assumes scheduled payments with no extra principal and no change in value. Taxes, insurance and dues are editable estimates; closing costs are not included. Conforming loan limits apply by county. Licensed in sixteen states for consumer mortgages.
Same buyer, three very different closings.
Most buyers can close the same purchase three ways, and the structures differ more than the labels suggest: conventional with insurance that cancels, FHA with a small investment and premiums for the life of the loan at full leverage, or VA with nothing down and no insurance for the eligible veteran.
Conventional, FHA, or VA.
The program’s strengths are the cancellable insurance, the breadth of occupancies, and a cost structure that rewards a strong score; its weakness is the same structure applied to a weak one. A Gilroy buyer with a strong score usually pays less each month here than on FHA.
FHA’s leverage is high and its credit standard is forgiving, but its insurance is priced by schedule rather than by score and does not cancel on a full-leverage thirty-year loan. A Gilroy buyer comparing the two sees the premium line stay on FHA and disappear on conventional. See Lendmire’s FHA loan program.
VA beats conventional on the principal residence for nearly every eligible borrower; conventional beats VA on everything VA does not touch: second homes, rentals, and buyers without the certificate. The two often sit side by side in one Gilroy household. See Lendmire’s VA loan program.
Choose by profile: a strong score and any down payment point to conventional; a modest score and a small down payment point to FHA; eligibility with full entitlement points to VA. A Gilroy loan officer runs all three on the same numbers before recommending one. Above the conforming limit, see the jumbo loan program.
What to prepare for a Gilroy scenario review.
The paperwork is the standard mortgage set, with the automated finding deciding how much of it the file actually needs; here is what a Gilroy scenario review typically draws on.
This is a general preparation guide, not a universal checklist. The selected lender may request additional information based on the transaction, the property, the automated underwriting finding, and the income picture. Nothing here is legal or tax advice.
Local details that can change the loan.
When a Gilroy conventional file surprises someone, the cause is usually one of these: a premium higher than expected, a score that priced differently than hoped, an appraisal under the price, a project that failed review, or a loan amount over the conforming limit.
Use these checks to keep the Gilroy file clean and fundable.
Three things to settle before a Gilroy review: how the mortgage insurance will be structured and when it ends, where the decision score lands and what it prices, and whether the property has any agency question attached.
- Plan the insurance: it cancels on request at the request threshold and automatically at the termination threshold.
- Confirm the score: the lender’s report sets the decision score; multiple borrowers use the average of the median scores.
- Count the properties: each financed property adds reserves to the next file.
Mortgage insurance: how much, and until when
Cancellation on request needs a good payment history, no subordinate liens, and no decline in value; automatic termination needs only that the loan be current. A Gilroy owner whose home has gained value may also ask the servicer to recognize the current value under its own rules, which is a servicer decision rather than a program right.
The score sets the cost
The decision score comes from the lender’s report, and with multiple borrowers the automated system uses the average of the median scores. On a Gilroy conventional file the score rarely ends eligibility, but it sets the loan-level adjustments and insurance premium, so a few points can change monthly cost.
Second homes, rentals, and financed-property limits
A Gilroy household can hold several conventional loans at once, but each financed property adds reserves to the next file and the agencies cap the number of financed properties a borrower may have. Second homes and rentals are leveraged lower than a principal residence and priced for the occupancy.
The conforming limit
Conforming loans are capped by county and by unit count, with higher limits in high-cost areas, and the FHFA resets the figures each year. A Gilroy purchase whose loan would run above the limit brings a larger down payment, uses the high-balance range where the county has one, or moves to jumbo; a loan officer confirms the current county limit.
Waiting periods after a credit event
The agencies season credit events rather than barring them: each bankruptcy chapter, a foreclosure, a deed-in-lieu, and a short sale carry their own period, shortened by documented extenuating circumstances. The snapshot table shows each one for a Gilroy buyer planning the timing.
From a Gilroy pre-approval to keys in hand.
From the first conversation to the closing table, a Gilroy conventional purchase takes four steps, and each one carries an agency rule inside it.
Pre-approval
A Gilroy pre-approval is a sizing exercise run through the automated system: the score, the income, the assets, the occupancy, and the price. The finding sets the ratio room and the reserves, and the loan officer puts the pre-approval in writing for the offer.
Contract and appraisal
The appraisal is a valuation first and a condition report second on a conventional file; a short value re-sizes the loan, and the Gilroy contract is adjusted or released under its contingency. Where the system offers value acceptance, the step collapses to the system’s figure.
Underwriting
The underwriter verifies what the automated finding assumed: income, assets and reserves, credit and any seasoning, occupancy, and the property. A manual file follows the lower ratio pair instead. Conditions are issued, documented, and cleared before final approval.
Closing
The Gilroy closing applies the program’s structure: the insurance premium in the payment while it applies, the escrow account, and no upfront premium on the monthly structure. The buyer moves in within sixty days on a principal residence, and the servicer tracks the balance toward the cancellation thresholds.
A brokerage that prices the whole market.
Lendmire never lends. It reads a Gilroy file against conventional, FHA, and VA, matches the program to the profile, and keeps the premium, the cost tier, and the conforming limit in front of the buyer before anything is signed.
Several programs, one set of numbers
A lender with one rate sheet sells that sheet; a brokerage with several can say which fits. For a Gilroy buyer with a strong score that is usually a conventional loan on the program whose cost is lowest for that file; for a modest score it may be FHA, and the arithmetic decides.
The insurance explained before the offer
No Gilroy buyer should learn at the closing table what the insurance costs or how long it lasts. The loan officer walks through the premium for the leverage chosen, the month the thresholds arrive on scheduled payments, and the alternative of a larger down payment.
Licensed, consumer-purpose, in writing
Lendmire carries the license for the state the Gilroy home is in, delivers the disclosures a consumer mortgage requires, and commits the terms to paper. The program figures on this page are read from one guideline source built on the agencies’ published guides.
Trusted by buyers & families alike.
Gilroy conventional loan FAQs
The questions below come up on nearly every Gilroy conventional conversation. The answers are general; the figures in the snapshot above are the program’s current parameters.
What is a conventional loan, and who is it for?
Think of it as the mortgage without a federal guaranty or insurance: the agencies set the rules, a private insurer covers the high-leverage slice, and the score sets the price. Principal residences, second homes, and one- to four-unit rentals are all inside it.
How much do I need to put down on a conventional loan in Gilroy?
The snapshot shows the minimums: one for the first-time buyer, one for everyone else, both on a principal residence. The calculator applies either to a Gilroy price, and the leverage table gives the figure for second homes and investment property.
What credit score do I need for a conventional loan?
The practical answer is the floor in the snapshot, and the useful answer is that every tier above it lowers the cost. A Gilroy buyer with a modest score should run FHA beside conventional, because FHA prices its insurance by schedule rather than by score.
How does private mortgage insurance work, and when does it end?
Above the threshold the insurance is part of the Gilroy payment; below it, there is none. Fannie Mae publishes the typical annual range shown in the snapshot, the insurer prices the actual premium, and the federal cancellation rules end it as equity arrives.
What is the conforming loan limit in Gilroy?
Ask a loan officer for the county’s current limit; it changes yearly and by unit count. Above it, a Gilroy purchase is still possible with a larger down payment on a conforming loan or on a jumbo loan.
Is a conventional loan assumable?
Conventional loans are generally not assumable because of the due-on-sale clause. The exception is a subset of adjustable-rate loans, and the loan documents govern.
What are HomeReady, Home Possible, and HomeOne?
HomeReady and Home Possible require income at or below a share of the area median and a homeownership education course; HomeOne requires a first-time buyer and nothing about income. All three sit at the top conventional leverage with reduced mortgage insurance coverage.
What happens after my Gilroy offer is accepted?
The file moves into appraisal and underwriting, and the calendar is set by the appraisal and the conditions the underwriter adds. No page can promise a date, and this one does not.
What debt-to-income ratio does a conventional loan allow?
The automated ceiling in the snapshot is the most a conventional file can carry, and the finding decides how much of it a particular Gilroy file gets based on the score, the reserves, and the rest of the profile. Manual files are read at the lower pair.
What does the appraisal check on a conventional loan?
Value first: the loan is sized on the lesser of the price and the appraised value. Condition second: there is no HUD or VA property standard, but the home must be safe, sound, and marketable, and findings on older homes are settled before closing. Where the automated system offers value acceptance or an appraisal waiver, no appraisal is ordered at all.
The Gilroy conforming file, priced across the market and explained plainly.
When you are ready, a Gilroy review sizes the loan, settles the program and the insurance structure, and produces written terms. Nothing on this page commits anyone to lend.
This guide covers Gilroy — for the statewide guidelines, markets, and scenarios, see Conventional Loans in California, part of Lendmire’s conventional loan program.
Nearby markets in California: Watsonville · Salinas · San Jose · Santa Cruz · Monterey · Santa Clara · Cupertino · Milpitas
Related programs: FHA Loans · Jumbo Loans · Refinance Loans