Current Apex hard money guidelines, updated from one source.
Every figure below renders from Lendmire’s centralized hard money standards source and refreshes automatically when program guidance changes. Final terms stay specific to the borrower, the property, the documented track record, and the selected lending partner.
Maximum loan-to-cost
Top tier for investors with five or more completed projects; 90% with two or more. First-time investors qualify at lower tiers.
Maximum bridge leverage
Purchase without rehab, measured against both the purchase price and the value. Property that needs time rather than work, refinanced once stabilized.
Maximum cash-out LTV
Cash-out and refinance ceiling against current value. Proceeds depend on the payoff, costs, the exit, and complete underwriting.
Minimum FICO
Additional conditions apply under 660. Underwriting is asset-based; the published floor does not by itself reach the top leverage tier.
Every fix-and-flip tier is separately capped at this share of the after-repair value.
Released in draws against completed, inspected work — not at closing.
Interest-only payments; no prepayment penalty.
Current standard-program snapshot · updated August 28, 2026. Loan amounts up to $5,000,000, larger by exception. Ground-up construction up to 90% of cost for builders with three or more completed projects, to 10 units. Figures are outer bounds, not offers; Lendmire is a mortgage broker, not a lender.
Business-purpose financing available in 40 markets, including Washington, D.C. In Apex, Census estimates put the population near 70,630, the median owner-occupied value around $576.1K, median gross rent near $1,902, and renters in about 23.5% of households — market context for a hard money file, not project underwriting.
What an Apex hard money loan is — and how the approval works.
A hard money loan is short-term, business-purpose financing secured by non-owner-occupied real estate. The file is read from the asset outward: the property, the purchase price, the budget, the after-repair value, and the exit come first, and the investor’s documented experience is weighed alongside them rather than personal-income calculations.
The asset and the plan lead the analysis
Three questions carry the file: what the property is worth today, what it will be worth after the work, and whether the budget and timeline can close that gap. A stronger answer to each can mean more leverage.
Leverage is tiered by documented experience
Top leverage tiers are reserved for investors with a record of completed projects. First-time investors qualify at lower tiers rather than being turned away, and the current snapshot above shows where each tier sits today.
Rehab funds in draws, not at closing
Rather than funding at closing, the rehab portion is released against completed, inspected work. Budget, scope, contractor, and draw schedule are built into the file from the start, not added later.
The exit is underwritten alongside the loan
The note is repaid by a sale or a refinance into long-term financing. Lenders want that path visible before closing — and planning the refinance early is where a broker who works both products earns the fee.
Total project cost generally means the purchase price plus the rehab or build budget. The investor’s experience tier caps loan-to-cost, and each tier is separately capped as a share of the after-repair value. The live program cards above show the current ceilings; the calculator below lets you model your own Apex project. The lender sets the final numbers from the appraisal, the scope of work, and the complete file.
One city, several distinct project types.
Apex brings together established neighborhoods, newer subdivisions, workforce housing, and blocks where older housing stock creates renovation demand. Each project type carries its own purchase, rehab, resale, and refinance considerations.
Citywide figures provide general market context, not project-level underwriting. A lender still evaluates the subject property’s purchase price, scope of work, after-repair value, exit, and program eligibility.
Data source: U.S. Census Bureau QuickFacts — Apex, ACS 5-Year 2020–2024: total population, renter-occupied share of occupied housing units, median value of owner-occupied housing units, and median gross rent.
Distinct Apex submarkets, distinct project considerations.
Hard money lenders in Apex, NC encounter very different projects across the city, from cosmetic flips and full renovations to small multifamily repositions and new construction. Purchase prices, renovation scope, resale depth, and refinance demand shape how every file is underwritten.
Infill and Ground-Up Construction
Ground-up construction on Apex infill lots is underwritten on the completed value and the builder’s track record, with the plans, the budget, and the exit reviewed together with the land value.
Older Housing Stock
Older houses in Apex tend to need systems and structural work along with finishes; lenders read the scope and contingency closely, release draws against inspected progress, and measure the after-repair value against renovated sales nearby.
The Rental Refinance Exit
Some of the most repeatable Apex projects never sell: buy on hard money, renovate, lease, and refinance into a DSCR loan on the property’s rent. Because Lendmire arranges both loans, the take-out is underwritten before the first draw.
The Urban Core
In Apex’s core, attached housing dominates: condominiums, townhomes, rowhouses. Lenders review the association package with the scope of work, and the same resale depth that supports the exit means the after-repair value has to hold up against many comparable sales.
Workforce Single-Family
Workforce single-family stock in Apex keeps a first or second project within reach and gives the finished renovation two exits — resale or a rental refinance — which is why the after-repair value is measured against sales on nearby blocks.
The Suburban Ring
The suburban ring around Apex sells finished houses to families, so full renovations are underwritten to that resale, and a bridge purchase covers the house that needs time rather than work.
Lendmire can also review eligible investment-property projects throughout the Apex area, from the core to the surrounding towns. Availability remains subject to the property, the program, and the current lending footprint.
What it looks like in this market.
Three composite projects that mirror how investors buy, renovate, and refinance in this market — each tied to the leverage tier and exit that fits it.
Infill construction, builder tier
A builder with completed projects takes an infill lot in Apex to a finished house, with leverage tiered by track record, capped against the completed value, and the build budget released in draws; the exit is a resale or a rental refinance.
Fit: construction · completed-value cap
First flip, cosmetic scope
A first Apex project: a dated single-family purchase with a cosmetic budget, one loan for purchase and rehab at the first experience tier, draws released as work is inspected, and a resale to an owner-occupant at the accepted after-repair value.
Fit: purchase plus rehab · first-tier leverage
Cash-out to fund the next project
An Apex investor uses a hard money cash-out on a low-leverage rental to fund the next purchase and rehab, within the cash-out ceiling and with the exit reviewed alongside the loan.
Fit: cash-out · exit underwritten
Four ways Apex investors can use hard money.
Four transaction paths cover most eligible Apex investment properties. The structure that fits depends on the project, the after-repair value, the investor’s experience, credit, reserves, and current lender guidelines.
Fix-and-flip loans
One loan covers the purchase and the rehab budget, with the rehab funded in draws against completed work. The investor’s experience tier sets the leverage, capped against the after-repair value.
Bridge purchase loans
Close on an Apex property that needs time rather than work — vacancy, condition, or a seller who will not wait for a conventional file — and refinance into long-term financing once it is stabilized.
Cash-out and refinance
Use the equity in a free-and-clear or low-leverage investment property to fund the next acquisition or rehab, within the cash-out ceiling shown in the current snapshot, with the exit underwritten alongside the loan.
Ground-up construction
Ground-up residential builds up to the unit count shown above; the builder’s completed projects set the leverage tier, the completed value caps it, and the construction budget is funded through draws.
Model an Apex project before requesting a quote.
The calculator opens with editable Apex sample assumptions for purchase price, rehab budget, and after-repair value. Leverage tiers refresh from Lendmire’s centralized hard money standards source. Every field is editable, and the result is a leverage estimate, not a loan offer.
Apex hard money calculator
Type in the purchase price, the rehab or build budget, and the after-repair value you expect the appraisal to support. What comes back is the estimated maximum loan at the selected experience tier, before closing costs and reserves.
Leverage tiers shown are the current program ceilings from Lendmire’s centralized hard money standards source.
The Apex starting assumptions are illustrative, derived from the citywide median owner-occupied housing value; every field is editable.
Illustrative leverage estimate only; nothing here is a cost quote or a loan offer. Leverage ceilings are outer bounds tiered by documented experience; the actual loan amount, draw schedule, reserves, and eligibility depend on the appraisal, the scope of work, and complete underwriting by the selected lender.
What lenders still review after the leverage math.
The loan-to-cost ceiling matters most, but it is only one part of the file. A complete Apex hard money review also weighs the investor’s track record and liquidity, the property’s current and after-repair value, the scope of work, and the exit.
Same investment property, different point in its life.
Short-term and asset-based. Underwriting covers the purchase, the budget, the after-repair value, and the exit; leverage is tiered by documented experience and the rehab funds in draws. Made for property that is not yet stabilized.
Long-term and rent-based: after the renovation is finished and the property is leased, a DSCR loan qualifies on the rental income relative to the payment, which is how most completed Apex hard money projects are repaid.
Apex projects often run on both: hard money to buy and renovate, then a DSCR refinance once the rent roll is stabilized. Lendmire arranges both, so the exit is planned before the first draw is funded.
What to prepare for an Apex hard money review.
The exact list depends on the lender and the project; these four categories are a practical starting point before an investor requests a project-specific quote.
This is a general preparation guide rather than a universal document checklist. The selected lender may request additional information based on the property, borrower, entity, project, and underwriting findings.
Local details that can change the leverage decision.
Apex costs, property characteristics, and project logistics can materially change a hard money result or a property’s eligibility. Work through the practical issues below before relying on a target leverage or a projected after-repair value.
Use these checks to keep the Apex file clean and fundable.
Because treatment differs by lending partner, this is not a promise of a universal outcome; it spotlights the main issues an investor should settle before closing.
After-repair value support
Every leverage tier is capped against the after-repair value the lender accepts, which comes from an appraisal or valuation and recent comparable sales, not from the investor’s projection. Optimistic Apex value assumptions are the most common reason a file lands at a lower loan amount than expected.
Scope, budget, and draw inspections
A line-item scope of work with a contingency, a contractor, and a realistic timeline sets the draw schedule. Draws are released against completed, inspected work, so a thin budget or a missing permit stalls the project rather than the paperwork.
Coastal insurance, flood, and wind
On coastal Apex property, wind and flood exposure sit on top of the builder’s-risk or vacant-property coverage the lender requires. Premiums, deductibles, and availability move the carrying-cost budget and can change the rental refinance that repays the note — resolve them before closing.
Entity vesting and title
Business-purpose loans are commonly vested in an LLC or other entity, with personal guarantees from the members. Formation documents, ownership information, and clean title should be in hand before closing so the entity does not become the reason a closing slips.
The exit and the timeline
Hard money is short-term, so the sale or refinance that repays it has to fit inside the term. For an Apex property that will be rented, planning the DSCR refinance at the start — seasoning, rent support, and leverage — keeps the exit from becoming a scramble when the note comes due.
From an Apex project to closing.
Start with the property and the plan, compare the available structures, document the project, and move through underwriting toward closing and the exit.
Run the project
Send the Apex property details, purchase price, budget, after-repair value, experience, credit range, and timing.
Compare partners
Lendmire compares multiple hard money and private money options for leverage, draw process, experience fit, and exit flexibility.
Document the project
Finish the appraisal or valuation, scope of work, contractor, insurance, title, entity, and asset documentation the lender requires.
Close and exit
Lock the structure, fund the purchase, draw against inspected work, and carry out the sale or refinance that retires the note.
A brokerage built around investor projects.
Apex projects range from a first cosmetic flip to ground-up construction and multi-property portfolios. Those files do not all belong with the same lender.
Partner comparison
Lendmire can compare multiple hard money and private money partners rather than forcing every Apex project into one lender’s leverage box.
Investor specialization
Leverage, experience tiers, draw mechanics, entity vesting, reserves, property type, and the exit that repays the note are the focus of the review.
The exit, planned early
Lendmire also arranges DSCR financing, so the refinance that repays the hard money note can be planned before the first draw is funded.
Trusted by buyers & investors alike.
Apex hard money loan FAQs
These answers address the purchase, rehab, construction, entity, leverage, and exit questions Apex investors commonly raise. Final program terms remain project-specific.
Can I use a hard money loan to buy an Apex fix-and-flip property?
Yes — eligible Apex investment properties can be purchased and renovated with a hard money loan through select lending partners. The purchase and the rehab budget close as one loan, the rehab funds in draws against completed work, and leverage is tiered by documented experience and capped against the after-repair value shown in the current snapshot.
Do I need experience to get a hard money loan in Apex?
No. First-time investors qualify; leverage is tiered by documented completed projects, so a first Apex project starts at a lower tier than a seasoned investor’s file. The snapshot above shows where every tier sits today.
What is the exit on an Apex hard money loan?
A sale once the work is done, or a refinance into long-term financing — for a rented property that is typically a DSCR loan qualified on the rental income. Lenders want the path visible before closing, and since Lendmire also arranges DSCR financing, the Apex refinance can be planned with the hard money loan.
How do I compare hard money lenders in Apex, NC?
Compare them on the things that change your outcome: the leverage tier your experience actually qualifies for, how rehab draws are inspected and released, how the after-repair value is established, which property types and Apex markets they accept, and how the exit is treated. Lendmire compares multiple hard money and private money partners on exactly those factors before a file is placed.
Can hard money fund ground-up construction in Apex?
Yes — eligible ground-up residential projects in Apex can be financed up to the unit count shown in the snapshot, with leverage tiered by the builder’s completed projects and capped against the completed value. Plans, budget, builder information, and the exit are reviewed alongside the land value.
Does coastal insurance affect an Apex hard money project?
It does. Wind, flood, and builder’s-risk coverage on a coastal Apex property raise carrying costs and can shape the exit, particularly when the take-out is a rental refinance; lenders expect that insurance picture settled before closing.
What should I submit for an Apex hard money quote?
Begin with the property address or market, the project type, the purchase price or payoff, the rehab or build budget, the expected after-repair value, your completed projects, the entity holding title, your credit range, and the timeline. From there a loan officer identifies what else the selected lender needs for an Apex file.
How long is a hard money loan?
Hard money is short-term: the current snapshot shows the term range, payments are interest-only during the term, and the current program carries no prepayment penalty. It is designed to be repaid by the exit — a sale or a refinance — not carried for years.
How are rehab draws funded?
Rehab funds are held back at closing and released as work is completed, typically after an inspection or documented progress. The draw schedule is set up front from the scope of work, so a line-item budget and a contractor belong in the file from the beginning.
What documents does a hard money lender typically ask for?
Identification and credit authorization, entity documents when vesting in an LLC, a list of completed projects, the purchase contract or payoff, a line-item scope of work and budget, contractor information, comparable sales supporting the after-repair value, evidence of the cash to close, and insurance and title information. The selected lender may ask for more based on the project.
Bring the Apex project. We will help structure the financing.
Bring a fix-and-flip, bridge purchase, cash-out, or ground-up construction scenario. No credit pull or commitment is required to request an initial review.
This page is Apex-specific — for guidelines and scenarios statewide, visit Hard Money Loans in North Carolina within Lendmire’s hard money loan program.
Also in Apex: DSCR Loans in Apex, NC