Current Burlington hard money guidelines, updated from one source.
The figures below are displayed from Lendmire’s centralized hard money standards source and update automatically when current program guidance changes. Final terms remain specific to the borrower, the property, the documented track record, and the selected lending partner.
Maximum loan-to-cost
Top tier for investors with five or more completed projects; 90% with two or more. First-time investors qualify at lower tiers.
Maximum bridge leverage
Purchase without rehab, measured against both the purchase price and the value. Property that needs time rather than work, refinanced once stabilized.
Maximum cash-out LTV
Cash-out and refinance ceiling against current value. Proceeds depend on the payoff, costs, the exit, and complete underwriting.
Minimum FICO
Additional conditions apply under 660. Underwriting is asset-based; the published floor does not by itself reach the top leverage tier.
Every fix-and-flip tier is separately capped at this share of the after-repair value.
Released in draws against completed, inspected work — not at closing.
Interest-only payments; no prepayment penalty.
Current standard-program snapshot · updated August 28, 2026. Loan amounts up to $5,000,000, larger by exception. Ground-up construction up to 90% of cost for builders with three or more completed projects, to 10 units. Figures are outer bounds, not offers; Lendmire is a mortgage broker, not a lender.
Business-purpose financing available in 40 markets, including Washington, D.C. By Census estimate, Burlington has roughly 59,610 residents, a median owner-occupied value of about $199.2K, median gross rent around $1,051, and renter households near 46.2% — context for a hard money file, not project underwriting.
What a Burlington hard money loan is — and how the approval works.
A hard money loan is short-term, business-purpose financing secured by non-owner-occupied real estate. The file is read from the asset outward: the property, the purchase price, the budget, the after-repair value, and the exit come first, and the investor’s documented experience is weighed alongside them rather than personal-income calculations.
The asset and the plan lead the analysis
Underwriting turns on what the property is worth today, what it should be worth once the work is done, and whether the budget and timeline actually get it there. A stronger story can open more leverage.
Leverage is tiered by documented experience
Investors with a record of completed projects reach the top leverage tiers. First-time investors start at lower tiers rather than being turned away, and the current snapshot above shows today’s position for each tier.
Rehab funds in draws, not at closing
The rehab portion of the loan is released against completed, inspected work rather than at closing. Budget, scope, contractor, and draw schedule are part of the file from the beginning, not an afterthought.
The exit is underwritten alongside the loan
A sale or a refinance into long-term financing is how the note gets repaid. Lenders want to see that path before closing — and planning the refinance early is where a broker who works both products earns the fee.
Total project cost generally means the purchase price plus the rehab or build budget. The experience tier caps loan-to-cost, and a separate cap applies to every tier as a share of the after-repair value. Current ceilings sit in the live program cards above, and the calculator below models your own Burlington project. The lender sets the final numbers from the appraisal, the scope of work, and the complete file.
A local market that supports several distinct project types.
Burlington spans established neighborhoods, newer subdivisions, workforce housing, and older blocks where renovation demand is constant. Each project type comes with distinct purchase, rehab, resale, and refinance considerations.
Citywide figures are market context, not project-level underwriting. The lender still evaluates the subject property’s purchase price, scope of work, after-repair value, exit, and program eligibility.
Data source: U.S. Census Bureau QuickFacts — Burlington, ACS 5-Year 2020–2024: total population, renter-occupied share of occupied housing units, median value of owner-occupied housing units, and median gross rent.
Distinct Burlington submarkets, distinct project considerations.
Hard money lenders in Burlington, NC underwrite very different projects across the city — cosmetic flips, full renovations, small multifamily repositions, and new construction. Purchase prices, renovation scope, resale depth, and refinance demand all shape each file.
Condominium and Association Projects
Condominium projects in Burlington bring association documents, budgets, and rental rules into the file. Lenders review them alongside the scope of work before setting leverage, and the exit is usually a resale.
Infill and Ground-Up Construction
Infill lots and teardowns in Burlington support ground-up construction, with leverage tiered by the builder’s completed projects and capped against the completed value. Plans, budget, and the exit are reviewed alongside the land value.
Older Housing Stock
On Burlington’s older blocks, roofs, systems, and structure come with the finishes, so the scope and contingency are read line by line, draws follow inspected work, and renovated comparables set the after-repair value.
The Rental Refinance Exit
A steady Burlington strategy is buy, renovate, rent, refinance — hard money for the purchase and work, then a DSCR loan on the leased property. Lendmire arranges both, so the refinance is planned before the note is funded.
Small Multifamily
A renter-heavy household mix gives Burlington two-to-four-unit repositions a natural exit: bridge or rehab money to buy and turn the units, then a DSCR refinance on the stabilized rent roll.
Workforce Single-Family
Burlington’s workforce single-family blocks keep first and second projects within reach — moderate budgets, an owner-occupant resale or a rental refinance as the exit, and an after-repair value measured against sales on nearby streets.
Eligible investment-property projects across the Burlington area, from the core out to the surrounding towns, can also be reviewed; availability depends on the property, the program, and the current lending footprint.
What it looks like in this market.
Three composite projects built from how investors actually buy, renovate, and refinance here, each mapped to the leverage tier and exit that fits it.
Small multifamily, stabilized and refinanced
On a Burlington small multifamily reposition, hard money funds the acquisition and the unit turns, and a DSCR refinance on the stabilized rent roll repays the note — Lendmire arranges both, so the exit is planned up front.
Fit: bridge or rehab · DSCR refinance exit
Infill construction, builder tier
A builder with completed projects takes an infill lot in Burlington to a finished house, with leverage tiered by track record, capped against the completed value, and the build budget released in draws; the exit is a resale or a rental refinance.
Fit: construction · completed-value cap
First flip, cosmetic scope
A first Burlington project: a dated single-family purchase with a cosmetic budget, one loan for purchase and rehab at the first experience tier, draws released as work is inspected, and a resale to an owner-occupant at the accepted after-repair value.
Fit: purchase plus rehab · first-tier leverage
Four ways Burlington investors can use hard money.
Here are the core transaction paths available for eligible Burlington investment properties. The right structure depends on the project, the after-repair value, the investor’s experience, credit, reserves, and current lender guidelines.
Fix-and-flip loans
Purchase and rehab budget in one loan, with the rehab funded in draws against completed work. Leverage is set by the investor’s experience tier and capped against the after-repair value.
Bridge purchase loans
Close on a Burlington property that needs time rather than work — vacancy, condition, or a seller who will not wait for a conventional file — and refinance into long-term financing once it is stabilized.
Cash-out and refinance
Access equity in a paid-off or lightly leveraged investment property for the next purchase or rehab, within the cash-out ceiling shown above; the sale or refinance that repays the note is reviewed with the loan.
Ground-up construction
New residential construction up to the unit count shown in the snapshot, with leverage tiered by the builder’s completed projects and capped against the completed value, and the build budget funded in draws.
Model a Burlington project before requesting a quote.
The calculator starts with editable Burlington sample assumptions for purchase price, rehab budget, and after-repair value. Leverage tiers refresh from Lendmire’s centralized hard money standards source. Every field remains editable, and the result is a leverage estimate, not a loan offer.
Burlington hard money calculator
Type in the purchase price, the rehab or build budget, and the after-repair value you expect the appraisal to support. What comes back is the estimated maximum loan at the selected experience tier, before closing costs and reserves.
Leverage tiers displayed here are the current program ceilings drawn from Lendmire’s centralized hard money standards source.
Illustrative Burlington starting assumptions are derived from the citywide median owner-occupied housing value. All fields are editable.
An illustrative leverage estimate only — not a cost quote and not a loan offer. Leverage ceilings are outer bounds tiered by documented experience, and the loan amount, draw schedule, reserves, and eligibility that actually apply come from the appraisal, the scope of work, and full underwriting by the selected lender.
What lenders still review after the leverage math.
Leverage gets the attention, but the loan-to-cost ceiling is only one part of the file. A complete Burlington hard money review also takes in the investor’s track record and liquidity, the property’s current and after-repair value, the scope of work, and the exit.
Same investment property, different point in its life.
Short-term and secured by the project itself: the lender underwrites purchase, budget, after-repair value, and exit, tiers leverage by documented experience, and funds the rehab in draws. It is financing for property that is not stabilized yet.
Long-term and cash-flow-based. When the property is renovated and rented, a DSCR loan qualifies on the rental income relative to the monthly payment, which is the typical take-out for a completed Burlington hard money project.
It is common for a Burlington project to use both: hard money to buy and renovate, then a DSCR refinance on the stabilized rent roll. Lendmire arranges both, so the exit is planned before the first draw is funded.
What to prepare for a Burlington hard money review.
Documentation varies by lender, but these four categories give an investor a practical starting point before requesting a project-specific quote.
This is a preparation guide rather than a universal checklist; the selected lender may request more based on the property, the borrower, the entity, the project, and what underwriting finds.
Local details that can change the leverage decision.
Local costs, property characteristics, and project logistics in Burlington can materially change a hard money result or a property’s eligibility. Review the practical issues below before relying on a target leverage or a projected after-repair value.
Use these checks to keep the Burlington file clean and fundable.
Because treatment differs by lending partner, this is not a promise of a universal outcome; it spotlights the main issues an investor should settle before closing.
After-repair value support
Every leverage tier is capped against the after-repair value the lender accepts, which comes from an appraisal or valuation and recent comparable sales, not from the investor’s projection. Optimistic Burlington value assumptions are the most common reason a file lands at a lower loan amount than expected.
Scope, budget, and draw inspections
The draw schedule comes from a line-item scope of work with a contingency, a named contractor, and a realistic timeline. Because draws are released only against completed, inspected work, a thin budget or a missing permit stalls the project instead of the paperwork.
Coastal insurance, flood, and wind
On coastal Burlington property, wind and flood exposure sit on top of the builder’s-risk or vacant-property coverage the lender requires. Premiums, deductibles, and availability move the carrying-cost budget and can change the rental refinance that repays the note — resolve them before closing.
Entity vesting and title
Vesting in an LLC or other entity is common on business-purpose loans, with personal guarantees from the members. Have formation documents, ownership information, and clean title ready before closing so the entity never becomes the reason a closing slips.
The exit and the timeline
Hard money is short-term, so the sale or refinance that repays it has to fit inside the term. For a Burlington property that will be rented, planning the DSCR refinance at the start — seasoning, rent support, and leverage — keeps the exit from becoming a scramble when the note comes due.
From a Burlington project to closing.
Begin with the property and the plan, compare the available structures, document the project, and move through underwriting toward closing and the exit.
Run the project
Send the Burlington property details, purchase price, budget, after-repair value, experience, credit range, and timing.
Compare partners
Lendmire compares multiple hard money and private money options for leverage, draw process, experience fit, and exit flexibility.
Document the project
Assemble the appraisal or valuation, scope of work, contractor, insurance, title, entity, and asset documentation the lender requires.
Close and exit
Finalize the structure, fund the purchase, draw against completed work, and execute the sale or the refinance on schedule.
A brokerage built around investor projects.
Burlington projects run from a first cosmetic flip to ground-up construction and multi-property portfolios. Those files do not all belong with the same lender.
Partner comparison
Lendmire can compare multiple hard money and private money partners instead of forcing every Burlington project into one institution’s box.
Investor specialization
The review centers on leverage, experience tiers, draw mechanics, entity vesting, reserves, property type, and the exit that repays the note.
The exit, planned early
Because Lendmire also arranges DSCR financing, the refinance that repays the hard money note can be planned before the first draw is funded.
Trusted by buyers & investors alike.
Burlington hard money loan FAQs
Below are answers to the purchase, rehab, construction, entity, leverage, and exit questions Burlington investors commonly raise. Final program terms remain project-specific.
Can I use a hard money loan to buy a Burlington fix-and-flip property?
Yes. Eligible Burlington investment properties can be bought and renovated on a hard money loan through select lending partners: one loan for the purchase and the rehab budget, rehab funded in draws against completed work, and leverage tiered by documented experience and capped against the after-repair value in the current snapshot.
Do I need experience to get a hard money loan in Burlington?
No. First-time investors qualify; leverage is tiered by documented completed projects, so a first Burlington project starts at a lower tier than a seasoned investor’s file. The snapshot above shows where every tier sits today.
How do I compare hard money lenders in Burlington, NC?
Focus on what changes your result: the leverage tier your track record qualifies for, how rehab draws are inspected and released, how the after-repair value is set, which property types and Burlington markets are accepted, and how the exit is treated. Lendmire weighs multiple hard money and private money partners on those factors before placing a file.
What is the exit on a Burlington hard money loan?
Either a sale after the renovation or a refinance into long-term financing — for a rented property, usually a DSCR loan that qualifies on the rental income. Lenders want that path visible before closing, and because Lendmire arranges DSCR financing as well, the Burlington refinance can be planned alongside the hard money loan.
Can hard money fund ground-up construction in Burlington?
Yes. Eligible ground-up residential builds in Burlington can be financed up to the unit count in the snapshot, with leverage tiered by the builder’s completed projects and capped against the completed value; plans, budget, builder experience, and the exit are all reviewed with the land.
Does coastal insurance affect a Burlington hard money project?
It can. Wind, flood, and builder’s-risk coverage on a coastal Burlington property add to carrying costs and can affect the exit, especially when the take-out is a rental refinance. Lenders expect the insurance picture to be understood before closing rather than discovered during the draw schedule.
Is a hard money loan a consumer mortgage in Burlington?
No — hard money and private money loans through Lendmire are business-purpose loans secured by non-owner-occupied Burlington investment property, not consumer mortgages, and the property cannot be the borrower’s residence.
How are rehab draws funded?
The rehab portion of the loan is held back at closing and released against completed work, usually after an inspection or documented progress. The draw schedule is agreed up front from the scope of work, which is why a line-item budget and a contractor are part of the file from the start.
Can I close a Burlington hard money loan in an LLC?
Yes. Business-purpose hard money loans are routinely vested in an LLC, corporation, or partnership, and individual investors are eligible too. Expect formation documents, ownership information, and personal guarantees in the file, with the closing team confirming Burlington title and entity requirements.
What documents does a hard money lender typically ask for?
Identification and credit authorization, entity documents when an LLC takes title, a list of completed projects, the purchase contract or payoff, a line-item scope of work and budget, contractor details, comparable sales behind the after-repair value, insurance, and evidence of the cash to close and reserves.
Bring the Burlington project. We will help structure the financing.
Bring a fix-and-flip, bridge purchase, cash-out, or ground-up construction scenario. No credit pull or commitment is required to request an initial review.
This page is Burlington-specific — for guidelines and scenarios statewide, visit Hard Money Loans in North Carolina within Lendmire’s hard money loan program.
Also in Burlington: DSCR Loans in Burlington, NC