Current Burleson hard money guidelines, updated from one source.
The figures below are displayed from Lendmire’s centralized hard money standards source and update automatically when current program guidance changes. Final terms remain specific to the borrower, the property, the documented track record, and the selected lending partner.
Maximum loan-to-cost
Top tier for investors with five or more completed projects; 90% with two or more. First-time investors qualify at lower tiers.
Maximum bridge leverage
Purchase without rehab, measured against both the purchase price and the value. Property that needs time rather than work, refinanced once stabilized.
Maximum cash-out LTV
Cash-out and refinance ceiling against current value. Proceeds depend on the payoff, costs, the exit, and complete underwriting.
Minimum FICO
Additional conditions apply under 660. Underwriting is asset-based; the published floor does not by itself reach the top leverage tier.
Every fix-and-flip tier is separately capped at this share of the after-repair value.
Released in draws against completed, inspected work — not at closing.
Interest-only payments; no prepayment penalty.
Current standard-program snapshot · updated August 28, 2026. Loan amounts up to $5,000,000, larger by exception. Ground-up construction up to 90% of cost for builders with three or more completed projects, to 10 units. Figures are outer bounds, not offers; Lendmire is a mortgage broker, not a lender.
Business-purpose financing available in 41 markets, including Washington, D.C. In Burleson, Census estimates put the population near 52,918, the median owner-occupied value around $308.2K, median gross rent near $1,685, and renters in about 27.9% of households — market context for a hard money file, not project underwriting.
What a Burleson hard money loan is — and how the approval works.
A hard money loan is short-term, business-purpose financing secured by non-owner-occupied real estate. Instead of qualifying primarily through personal-income calculations, the lender starts with the property, the purchase price, the budget, the after-repair value, and the exit — then weighs the investor’s documented experience.
The asset and the plan lead the analysis
The central questions are what the property is worth today, what it will be worth once the work is complete, and whether the budget and timeline get it there. The stronger that story, the more leverage may be available.
Leverage is tiered by documented experience
Investors with a record of completed projects reach the top leverage tiers. First-time investors start at lower tiers rather than being turned away, and the current snapshot above shows today’s position for each tier.
Rehab funds in draws, not at closing
The rehab portion pays out as work is finished and inspected, not at the closing table. That is why the budget, the scope, the contractor, and the draw schedule are in the file from the beginning.
The exit is underwritten alongside the loan
A sale or a refinance into long-term financing repays the note, and lenders look for that path before closing. Mapping the refinance early is where a broker who works both products earns the fee.
Total project cost generally means the purchase price plus the rehab or build budget. The investor’s experience tier caps loan-to-cost, and each tier is separately capped as a share of the after-repair value. The live program cards above show the current ceilings; the calculator below lets you model your own Burleson project. The lender sets the final numbers from the appraisal, the scope of work, and the complete file.
A local market with several distinct project types.
Across Burleson, established neighborhoods, newer subdivisions, workforce housing, and blocks with older housing stock each create renovation demand of their own. Each project type carries different purchase, rehab, resale, and refinance considerations.
Citywide figures give general market context and are not project-level underwriting. Purchase price, scope of work, after-repair value, exit, and program eligibility are still evaluated on the subject property.
Data source: U.S. Census Bureau QuickFacts — Burleson, ACS 5-Year 2020–2024: total population, renter-occupied share of occupied housing units, median value of owner-occupied housing units, and median gross rent.
Distinct Burleson submarkets, distinct project considerations.
Hard money lenders in Burleson, TX underwrite very different projects across the city — cosmetic flips, full renovations, small multifamily repositions, and new construction. Purchase prices, renovation scope, resale depth, and refinance demand all shape each file.
Newer Stock and Light Rehab
Newer Burleson subdivisions call for light rehabs and bridge purchases rather than gut renovations; the file stabilizes quickly and refinances into long-term financing on a schedule set before closing.
Infill and Ground-Up Construction
Burleson has infill and teardown opportunities that suit ground-up construction; leverage follows the builder’s completed projects and is capped against the completed value, with plans, budget, and exit reviewed next to the land.
Older Housing Stock
On Burleson’s older blocks, roofs, systems, and structure come with the finishes, so the scope and contingency are read line by line, draws follow inspected work, and renovated comparables set the after-repair value.
The Rental Refinance Exit
A steady Burleson strategy is buy, renovate, rent, refinance — hard money for the purchase and work, then a DSCR loan on the leased property. Lendmire arranges both, so the refinance is planned before the note is funded.
Workforce Single-Family
Burleson’s workforce single-family blocks keep first and second projects within reach — moderate budgets, an owner-occupant resale or a rental refinance as the exit, and an after-repair value measured against sales on nearby streets.
The Suburban Ring
The suburban neighborhoods around Burleson favor full renovations that sell to families at completion, with a bridge purchase as the alternative when the property needs time rather than work. Comparable resales set the after-repair value.
Eligible investment-property projects throughout the Burleson area, from the core to the surrounding towns, can also be reviewed. Availability remains subject to the property, the program, and the current lending footprint.
What it looks like in this market.
Three composite projects drawn from how investors actually buy, renovate, and refinance here — each mapped to the leverage tier and exit that fits it.
Infill construction, builder tier
A builder with completed projects takes an infill lot in Burleson to a finished house, with leverage tiered by track record, capped against the completed value, and the build budget released in draws; the exit is a resale or a rental refinance.
Fit: construction · completed-value cap
First flip, cosmetic scope
A first-time investor buys a dated single-family house in Burleson with a cosmetic scope, closes purchase and rehab as one loan at the first experience tier, draws against completed work, and sells to an owner-occupant at the after-repair value the lender accepted.
Fit: purchase plus rehab · first-tier leverage
Cash-out to fund the next project
An investor with a free-and-clear Burleson rental pulls equity on a hard money cash-out at the current ceiling to fund the next acquisition, with the exit — a sale or a refinance — underwritten just as it would be on a purchase.
Fit: cash-out · exit underwritten
Four ways Burleson investors can use hard money.
These are the core transaction paths available for eligible Burleson investment properties. The right structure depends on the project, the after-repair value, the investor’s experience, credit, reserves, and current lender guidelines.
Fix-and-flip loans
One loan covers the purchase and the rehab budget, with the rehab funded in draws against completed work. The investor’s experience tier sets the leverage, capped against the after-repair value.
Bridge purchase loans
Take down a Burleson property that needs time rather than construction — a vacancy, a condition item, a seller who will not wait for conventional financing — and refinance into long-term financing once it is stabilized.
Cash-out and refinance
Use the equity in a free-and-clear or low-leverage investment property to fund the next acquisition or rehab, within the cash-out ceiling shown in the current snapshot, with the exit underwritten alongside the loan.
Ground-up construction
Ground-up residential construction up to the unit count in the snapshot, with leverage tiered by the builder’s completed projects and capped against the completed value, and the build budget funded in draws.
Model a Burleson project before requesting a quote.
The calculator starts with editable Burleson sample assumptions for purchase price, rehab budget, and after-repair value. Leverage tiers refresh from Lendmire’s centralized hard money standards source. Every field remains editable, and the result is a leverage estimate, not a loan offer.
Burleson hard money calculator
Type in the purchase price, the rehab or build budget, and the after-repair value you expect the appraisal to support. What comes back is the estimated maximum loan at the selected experience tier, before closing costs and reserves.
The leverage tiers shown are today’s program ceilings, read from Lendmire’s centralized hard money standards source.
The Burleson starting assumptions are illustrative, derived from the citywide median owner-occupied housing value; every field is editable.
This is an illustrative leverage estimate, not a cost quote or a loan offer. The ceilings are outer bounds tiered by documented experience; the actual loan amount, draw schedule, reserves, and eligibility are set by the appraisal, the scope of work, and complete underwriting by the selected lender.
What lenders still review after the leverage math.
The loan-to-cost ceiling matters most, but it is only one part of the file. A complete Burleson hard money review also weighs the investor’s track record and liquidity, the property’s current and after-repair value, the scope of work, and the exit.
Same investment property, different point in its life.
Short-term and asset-based. The lender underwrites the purchase, the budget, the after-repair value, and the exit, tiers leverage by documented experience, and funds the rehab in draws. Built for property that is not yet stabilized.
Long-term and cash-flow-based. When the property is renovated and rented, a DSCR loan qualifies on the rental income relative to the monthly payment, which is the typical take-out for a completed Burleson hard money project.
Both products usually appear in one Burleson project — hard money for the purchase and renovation, a DSCR refinance on the stabilized rent roll. Because Lendmire arranges both, the exit is settled before the first draw.
What to prepare for a Burleson hard money review.
Documentation varies by lender, but these four categories give an investor a practical starting point before requesting a project-specific quote.
Treat this as a general preparation guide, not a universal document checklist. The selected lender may ask for additional information based on the property, borrower, entity, project, and underwriting findings.
Local details that can change the leverage decision.
Local costs, property characteristics, and project logistics in Burleson can change a hard money result or a property’s eligibility materially — review the practical issues below before relying on a target leverage or projected after-repair value.
Use these checks to keep the Burleson file clean and fundable.
Treatment varies by lending partner, so the goal here is not to promise a universal outcome. It is to spotlight the main issues an investor should resolve before closing.
After-repair value support
The lender’s after-repair value — from an appraisal or valuation and recent comparable sales — caps every leverage tier, and it will not match an optimistic projection. In Burleson files, an unsupported value is the most frequent reason the loan comes in below expectations.
Scope, budget, and draw inspections
The draw schedule comes from a line-item scope of work with a contingency, a contractor, and a realistic timeline. Because draws release only against completed, inspected work, a thin budget or a missing permit stops the project, not just the file.
Insurance during the project
An empty or mid-renovation Burleson property is covered by builder’s-risk or vacant-property insurance rather than a standard landlord policy, with the lender named. Price that coverage into the carrying costs before closing.
Entity vesting and title
Business-purpose loans are commonly vested in an LLC or other entity, with personal guarantees from the members. Formation documents, ownership information, and clean title should be in hand before closing so the entity does not become the reason a closing slips.
The exit and the timeline
Hard money is short-term, so the sale or refinance that repays it has to fit inside the term. For a Burleson property that will be rented, planning the DSCR refinance at the start — seasoning, rent support, and leverage — keeps the exit from becoming a scramble when the note comes due.
From a Burleson project to closing.
Start from the property and the plan, weigh the available structures, document the project, then move through underwriting to closing and the exit.
Run the project
Send the Burleson property details — purchase price, budget, after-repair value, experience, credit range, and the planned exit.
Compare partners
Lendmire compares multiple hard money and private money options for leverage, draw process, experience fit, and exit flexibility.
Document the project
Complete the appraisal or valuation, scope of work, contractor, insurance, title, entity, and asset documentation the lender requires.
Close and exit
Finalize the structure, fund the purchase, draw against completed work, and execute the sale or the refinance that repays the note.
A brokerage built around investor projects.
Projects across Burleson span a first cosmetic flip, ground-up construction, and multi-property portfolios. Those files do not all belong with the same lender.
Partner comparison
Instead of forcing every Burleson project into one institution’s box, Lendmire can compare multiple hard money and private money partners.
Investor specialization
Leverage, experience tiers, draw mechanics, entity vesting, reserves, property type, and the exit that repays the note are the focus of the review.
The exit, planned early
Lendmire arranges DSCR financing as well, so the refinance that retires the hard money note is planned before the purchase closes.
Trusted by buyers & investors alike.
Burleson hard money loan FAQs
Below are answers to the purchase, rehab, construction, entity, leverage, and exit questions Burleson investors commonly raise. Final program terms remain project-specific.
Can I use a hard money loan to buy a Burleson fix-and-flip property?
Yes. Eligible Burleson investment properties can be bought and renovated on a hard money loan through select lending partners: one loan for the purchase and the rehab budget, rehab funded in draws against completed work, and leverage tiered by documented experience and capped against the after-repair value in the current snapshot.
What is the exit on a Burleson hard money loan?
A sale once the renovation is complete, or a refinance into long-term financing — typically a DSCR loan on a rented Burleson property. Lenders expect to see that path before closing, and because Lendmire arranges the DSCR refinance too, the exit is planned before the first draw.
Do I need experience to get a hard money loan in Burleson?
No — first-time investors are eligible. Leverage is tiered by documented completed projects, so a first project qualifies at a lower tier than an investor with a longer record. The current snapshot shows where each tier sits today, and the calculator lets you model a Burleson project at your own tier.
How do I compare hard money lenders in Burleson, TX?
Compare them on the things that change your outcome: the leverage tier your experience actually qualifies for, how rehab draws are inspected and released, how the after-repair value is established, which property types and Burleson markets they accept, and how the exit is treated. Lendmire compares multiple hard money and private money partners on exactly those factors before a file is placed.
Can hard money fund ground-up construction in Burleson?
Yes. Eligible ground-up residential builds in Burleson are financed up to the unit count in the snapshot, with leverage set by the builder’s completed projects and capped against the completed value. Plans, budget, builder information, and the exit are reviewed with the land value.
What should I submit for a Burleson hard money quote?
The property address or market, the project type, the purchase price or payoff, the rehab or build budget, the expected after-repair value, your completed projects, the entity that will take title, your credit range, and the timeline. A loan officer then identifies what else the Burleson file needs.
Can I close a Burleson hard money loan in an LLC?
Yes. Business-purpose hard money loans are routinely vested in an LLC, corporation, or partnership, and individual investors are eligible too. Expect formation documents, ownership information, and personal guarantees in the file, with the closing team confirming Burleson title and entity requirements.
What documents does a hard money lender typically ask for?
Identification and credit authorization, entity documents when vesting in an LLC, a list of completed projects, the purchase contract or payoff, a line-item scope of work and budget, contractor information, comparable sales supporting the after-repair value, evidence of the cash to close, and insurance and title information. The selected lender may ask for more based on the project.
Can I refinance or take cash out of a Burleson investment property with hard money?
Yes, within the cash-out and refinance ceiling shown in the current snapshot. Cash-out is commonly used to fund the next Burleson acquisition or rehab, and the lender underwrites the exit on the cash-out loan the same way it does on a purchase.
Does the after-repair value come from my estimate?
No — the lender sets the after-repair value from an appraisal or valuation and recent comparable sales, not from the investor’s projection. Build your own estimate the same way, because every leverage tier is capped against the value the lender accepts.
Bring the Burleson project. We will help structure the financing.
Start with a fix-and-flip, bridge purchase, cash-out, or ground-up construction scenario. No credit pull or commitment is required to request an initial review.
This page is Burleson-specific — for guidelines and scenarios statewide, visit Hard Money Loans in Texas within Lendmire’s hard money loan program.
Nearby markets in Texas: Mansfield · Arlington · Fort Worth · Grand Prairie · North Richland Hills · Euless · DeSoto · Waxahachie
Other loan programs in Burleson: DSCR Loans in Burleson, TX · Super Jumbo DSCR Loans in Burleson, TX · Short-Term Rental Loans in Burleson, TX · Investment Property Cash-Out Refinance in Burleson, TX · Bank Statement Loans in Burleson, TX · Super Jumbo Bank Statement Loans in Burleson, TX · Bank Statement HELOC in Burleson, TX · Investment Property HELOC in Burleson, TX