Current Irving hard money guidelines, updated from one source.
The figures below are displayed from Lendmire’s centralized hard money standards source and update automatically when current program guidance changes. Final terms remain specific to the borrower, the property, the documented track record, and the selected lending partner.
Maximum loan-to-cost
Top tier for investors with five or more completed projects; 90% with two or more. First-time investors qualify at lower tiers.
Maximum bridge leverage
Purchase without rehab, measured against both the purchase price and the value. Property that needs time rather than work, refinanced once stabilized.
Maximum cash-out LTV
Cash-out and refinance ceiling against current value. Proceeds depend on the payoff, costs, the exit, and complete underwriting.
Minimum FICO
Additional conditions apply under 660. Underwriting is asset-based; the published floor does not by itself reach the top leverage tier.
Every fix-and-flip tier is separately capped at this share of the after-repair value.
Released in draws against completed, inspected work — not at closing.
Interest-only payments; no prepayment penalty.
Current standard-program snapshot · updated August 28, 2026. Loan amounts up to $5,000,000, larger by exception. Ground-up construction up to 90% of cost for builders with three or more completed projects, to 10 units. Figures are outer bounds, not offers; Lendmire is a mortgage broker, not a lender.
Business-purpose financing available in 40 markets, including Washington, D.C. In Irving, Census estimates put the population near 256,492, the median owner-occupied value around $315.6K, median gross rent near $1,619, and renters in about 61.9% of households — market context for a hard money file, not project underwriting.
What an Irving hard money loan is — and how the approval works.
A hard money loan is short-term, business-purpose financing secured by non-owner-occupied real estate. Rather than qualifying the file primarily on personal-income calculations, the lender begins with the property, the purchase price, the budget, the after-repair value, and the exit — and then weighs the investor’s documented experience.
The asset and the plan lead the analysis
Underwriting asks what the property is worth today, what it will be worth once the work is complete, and whether the budget and timeline get it there. The more convincing the answers, the more leverage may be on the table.
Leverage is tiered by documented experience
Investors with a record of completed projects reach the top leverage tiers. First-time investors start at lower tiers rather than being turned away, and the current snapshot above shows today’s position for each tier.
Rehab funds in draws, not at closing
The rehab portion of the loan funds as work is completed and inspected rather than at closing. Budget, scope, contractor, and draw schedule belong in the file from day one rather than being added later.
The exit is underwritten alongside the loan
A sale or a refinance into long-term financing is how the note gets repaid. Lenders want to see that path before closing — and planning the refinance early is where a broker who works both products earns the fee.
Total project cost generally means the purchase price plus the rehab or build budget. Loan-to-cost is capped by the investor’s experience tier, and every tier is separately capped as a share of the after-repair value. The live program cards above show the current ceilings, while the calculator below lets you model your own Irving project. The lender sets the final numbers from the appraisal, the scope of work, and the complete file.
A local market that supports several distinct project types.
In Irving, established neighborhoods, newer subdivisions, workforce housing, and blocks with older housing stock each generate renovation demand. Every project type carries its own purchase, rehab, resale, and refinance considerations.
Citywide figures provide general market context, not project-level underwriting. A lender still evaluates the subject property’s purchase price, scope of work, after-repair value, exit, and program eligibility.
Data source: U.S. Census Bureau QuickFacts — Irving, ACS 5-Year 2020–2024: total population, renter-occupied share of occupied housing units, median value of owner-occupied housing units, and median gross rent.
Distinct Irving submarkets, distinct project considerations.
Hard money lenders in Irving, TX see very different projects across the city: cosmetic flips, full renovations, small multifamily repositions, and new construction. Purchase prices, renovation scope, resale depth, and refinance demand all shape how each file is underwritten.
The Urban Core
In Irving’s core, attached housing dominates: condominiums, townhomes, rowhouses. Lenders review the association package with the scope of work, and the same resale depth that supports the exit means the after-repair value has to hold up against many comparable sales.
Small Multifamily
Because many Irving households rent, two-to-four-unit repositions have a built-in exit here: stabilize the building on hard money, turn the units, then refinance into DSCR financing on the improved rents.
Workforce Single-Family
The workforce neighborhoods of Irving are where first and second projects tend to start: manageable purchase prices, cosmetic to moderate scope, and two exits — a sale to an owner-occupant or a refinance into a rental loan. The after-repair value still needs nearby sales behind it.
The Suburban Ring
The suburban neighborhoods around Irving favor full renovations that sell to families at completion, with a bridge purchase as the alternative when the property needs time rather than work. Comparable resales set the after-repair value.
Newer Stock and Light Rehab
In the newer parts of Irving, projects are lighter — cosmetic work or a bridge purchase on a house that needs time rather than construction — and the exit is typically a refinance into long-term financing once the property is stabilized.
Condominium and Association Projects
Condominium projects in Irving bring association documents, budgets, and rental rules into the file. Lenders review them alongside the scope of work before setting leverage, and the exit is usually a resale.
Eligible investment-property projects throughout the Irving area, from the core to the surrounding towns, can also be reviewed. Availability remains subject to the property, the program, and the current lending footprint.
What it looks like in this market.
Three composite projects built from how investors actually buy, renovate, and refinance here, each mapped to the leverage tier and exit that fits it.
Small multifamily, stabilized and refinanced
An investor acquires an under-managed two-to-four-unit building in Irving on bridge money, turns the units and the rent roll, and refinances into DSCR financing on the improved rents — the exit planned with Lendmire before the first draw.
Fit: bridge or rehab · DSCR refinance exit
Infill construction, builder tier
On an Irving teardown, an experienced builder finances land and construction together, draws against completed stages, and exits by resale or by refinancing the finished house into rental financing.
Fit: construction · completed-value cap
First flip, cosmetic scope
A first-time investor buys a dated single-family house in Irving with a cosmetic scope, closes purchase and rehab as one loan at the first experience tier, draws against completed work, and sells to an owner-occupant at the after-repair value the lender accepted.
Fit: purchase plus rehab · first-tier leverage
Four ways Irving investors can use hard money.
These are the core transaction paths available for eligible Irving investment properties. The right structure depends on the project, the after-repair value, the investor’s experience, credit, reserves, and current lender guidelines.
Fix-and-flip loans
One loan covers the purchase and the rehab budget, with the rehab released in draws against completed work; the experience tier sets the leverage and the after-repair value caps it.
Bridge purchase loans
For an Irving property that is not yet conventional-ready because of vacancy, condition, or timing, a bridge loan closes it at the bridge ceiling and a refinance into long-term financing repays the note once it is stabilized.
Cash-out and refinance
Access equity in a paid-off or lightly leveraged investment property for the next purchase or rehab, within the cash-out ceiling shown above; the sale or refinance that repays the note is reviewed with the loan.
Ground-up construction
Residential new builds up to the unit count shown in the snapshot, with leverage set by the builder’s completed projects and capped against the completed value, and the build budget funded in draws.
Model an Irving project before requesting a quote.
The calculator opens with editable Irving sample assumptions for purchase price, rehab budget, and after-repair value. Leverage tiers refresh from Lendmire’s centralized hard money standards source. Every field is editable, and the result is a leverage estimate, not a loan offer.
Irving hard money calculator
Type in the purchase price, the rehab or build budget, and the after-repair value you expect the appraisal to support. What comes back is the estimated maximum loan at the selected experience tier, before closing costs and reserves.
Leverage tiers displayed here are the current program ceilings drawn from Lendmire’s centralized hard money standards source.
Illustrative Irving starting assumptions are derived from the citywide median owner-occupied housing value. All fields are editable.
Illustrative leverage estimate only; nothing here is a cost quote or a loan offer. Leverage ceilings are outer bounds tiered by documented experience; the actual loan amount, draw schedule, reserves, and eligibility depend on the appraisal, the scope of work, and complete underwriting by the selected lender.
What lenders still review after the leverage math.
The loan-to-cost ceiling sits at the center, yet it is only one part of the file. A full Irving hard money review also looks at the investor’s track record and liquidity, the property’s current and after-repair value, the scope of work, and the exit.
Same investment property, different point in its life.
Short-term, asset-based financing. The purchase, the budget, the after-repair value, and the exit are underwritten; leverage is tiered by documented experience and rehab dollars are released in draws. Built for property that is not yet stabilized.
Long-term and cash-flow-based. When the property is renovated and rented, a DSCR loan qualifies on the rental income relative to the monthly payment, which is the typical take-out for a completed Irving hard money project.
It is common for an Irving project to use both: hard money to buy and renovate, then a DSCR refinance on the stabilized rent roll. Lendmire arranges both, so the exit is planned before the first draw is funded.
What to prepare for an Irving hard money review.
Documentation varies by lender and project, but these four categories give an investor a practical starting point before requesting a project-specific quote.
Treat this as a general preparation guide, not a universal document checklist. The selected lender may ask for additional information based on the property, borrower, entity, project, and underwriting findings.
Local details that can change the leverage decision.
Local costs, property characteristics, and project logistics in Irving can change a hard money result or a property’s eligibility materially — review the practical issues below before relying on a target leverage or projected after-repair value.
Use these checks to keep the Irving file clean and fundable.
Treatment varies by lending partner, so the goal here is not to promise a universal outcome. It is to spotlight the main issues an investor should resolve before closing.
After-repair value support
Every leverage tier is capped against the after-repair value the lender accepts, which comes from an appraisal or valuation and recent comparable sales, not from the investor’s projection. Optimistic Irving value assumptions are the most common reason a file lands at a lower loan amount than expected.
Scope, budget, and draw inspections
A line-item scope of work with a contingency, a contractor, and a realistic timeline sets the draw schedule. Draws are released against completed, inspected work, so a thin budget or a missing permit stalls the project rather than the paperwork.
Coastal insurance, flood, and wind
Coastal Irving projects add wind and flood exposure to the builder’s-risk or vacant-property coverage the lender requires. Premiums, deductibles, and availability change the carrying-cost budget and can affect the rental refinance that repays the note, so settle the insurance picture before closing.
Entity vesting and title
Business-purpose loans are commonly vested in an LLC or other entity, with personal guarantees from the members. Formation documents, ownership information, and clean title should be in hand before closing so the entity does not become the reason a closing slips.
The exit and the timeline
Because hard money is short-term, the sale or refinance that repays it has to land inside the term. When an Irving property will be held as a rental, mapping the DSCR refinance up front — seasoning, rent support, and leverage — keeps the exit from turning into a scramble at maturity.
From an Irving project to closing.
Start from the property and the plan, weigh the available structures, document the project, then move through underwriting to closing and the exit.
Run the project
Send the Irving property details — purchase price, budget, after-repair value, experience, credit range, and the planned exit.
Compare partners
Lendmire weighs multiple hard money and private money options for leverage, draw process, experience fit, and property appetite.
Document the project
Finish the valuation, scope of work, contractor, insurance, title, entity, and asset documentation the selected lender asks for.
Close and exit
Finalize the structure, fund the purchase, draw against completed work, and execute the sale or the refinance on schedule.
A brokerage built around investor projects.
Irving projects run from a first cosmetic flip to ground-up construction and multi-property portfolios. Those files do not all belong with the same lender.
Partner comparison
Instead of forcing every Irving project into a single lender’s leverage box, Lendmire compares multiple hard money and private money partners.
Investor specialization
Leverage, experience tiers, draw mechanics, entity vesting, reserves, property type, and the exit that repays the note are the focus of the review.
The exit, planned early
Because Lendmire also arranges DSCR financing, the refinance that repays the hard money note can be planned before the purchase closes.
Trusted by buyers & investors alike.
Irving hard money loan FAQs
These answers address the purchase, rehab, construction, entity, leverage, and exit questions Irving investors commonly raise. Final program terms remain project-specific.
Can I use a hard money loan to buy an Irving fix-and-flip property?
Yes. Eligible Irving investment properties can be bought and renovated with a hard money loan through select lending partners: purchase and rehab budget close as one loan, the rehab is released in draws against inspected work, and leverage follows the experience tier shown in the snapshot above.
Do I need experience to get a hard money loan in Irving?
No. First-time investors are eligible; leverage simply steps up with documented completed projects, so a first project starts at a lower tier than a seasoned investor’s. The snapshot shows today’s tiers, and the calculator models an Irving project at yours.
What is the exit on an Irving hard money loan?
A sale once the renovation is complete, or a refinance into long-term financing — typically a DSCR loan on a rented Irving property. Lenders expect to see that path before closing, and because Lendmire arranges the DSCR refinance too, the exit is planned before the first draw.
How do I compare hard money lenders in Irving, TX?
Compare them on the things that change your outcome: the leverage tier your experience actually qualifies for, how rehab draws are inspected and released, how the after-repair value is established, which property types and Irving markets they accept, and how the exit is treated. Lendmire compares multiple hard money and private money partners on exactly those factors before a file is placed.
Can hard money fund ground-up construction in Irving?
Yes. Eligible ground-up residential builds in Irving are financed up to the unit count in the snapshot, with leverage set by the builder’s completed projects and capped against the completed value. Plans, budget, builder information, and the exit are reviewed with the land value.
Does coastal insurance affect an Irving hard money project?
It can — wind, flood, and builder’s-risk coverage on a coastal Irving property raise carrying costs and can change the exit, particularly when the take-out is a rental refinance. Lenders want that insurance picture settled before closing, not uncovered mid-project.
How is hard money different from a DSCR loan?
Hard money is short-term and asset-based, funding the purchase and the renovation on the after-repair value and the plan with experience-tiered leverage. A DSCR loan is long-term and cash-flow-based, qualifying a rented property on its rental income. Many projects use both: hard money to renovate, DSCR to hold.
What documents does a hard money lender typically ask for?
Expect identification and credit authorization, entity documents for an LLC, a record of completed projects, the purchase contract or payoff, a line-item scope of work and budget, contractor information, comparable sales behind the after-repair value, proof of the cash to close, and insurance and title information. The lender may request more based on the project.
What should I submit for an Irving hard money quote?
Begin with the property address or market, the project type, the purchase price or payoff, the rehab or build budget, the expected after-repair value, your completed projects, the entity holding title, your credit range, and the timeline. From there a loan officer identifies what else the selected lender needs for an Irving file.
Is a hard money loan a consumer mortgage in Irving?
No — hard money and private money loans through Lendmire are business-purpose loans secured by non-owner-occupied Irving investment property, not consumer mortgages, and the property cannot be the borrower’s residence.
Bring the Irving project. We will help structure the financing.
Bring a fix-and-flip, bridge purchase, cash-out, or ground-up construction scenario. No credit pull or commitment is required to request an initial review.
This page is Irving-specific — for guidelines and scenarios statewide, visit Hard Money Loans in Texas within Lendmire’s hard money loan program.
Also in Irving: DSCR Loans in Irving, TX