Current conventional guidelines, updated from one source.
One guideline source feeds every number here, and the page updates when the source does. These are purchase and refinance parameters; the leverage table underneath covers occupancy by occupancy, and the status lines cover insurance, gifts, and the first-time-buyer programs.
First-time buyer; 5% standard; 97% loan-to-value at the top
On a principal residence the down payment starts at 3% for a first-time buyer and 5% otherwise, the top leverage being 97% loan-to-value. Second homes and investment properties ask for more, as the leverage table shows, and the price of any leverage above 80% is mortgage insurance.
Priced on the score; no agency minimum with an automated approval
A 620 decision score opens the program on the wholesale side; the agencies set no minimum for an automated approval and 620 to 640 for manual underwriting by loan type. The strongest effect of the score is on cost, through loan-level adjustments and the mortgage insurance premium.
Required above 80% LTV; removed at 80% by request, 78% automatically
The insurance line in a conventional payment is a bridge, not a fixture: required above 80% loan-to-value, cancellable at 80% on request and 78% by law, and priced by the insurer on the score inside Fannie Mae’s published 0.58%–1.86% range. Twenty percent down skips it entirely.
With an automated approval; 36% to 45% on a manual file
50% is the ceiling for a file the automated system approves. Manual underwriting caps the ratio at 36% to 45% depending on the score and the reserves, and the automated finding also sets the reserves the file must show.
| Purpose | Occupancy and program | Maximum LTV |
|---|---|---|
| Purchase | One-unit principal residence, first-time buyer (fixed rate) | 97% |
| Purchase | One-unit principal residence, standard | 95% |
| Purchase | HomeReady / Home Possible (income limits apply) | 97% |
| Purchase | Two- to four-unit principal residence | 95% |
| Purchase | Second home | 90% |
| Purchase | Investment property, one unit | 85% |
| Purchase | Investment property, two to four units | 75% |
| Refinance | Limited cash-out (rate-and-term), one-unit principal residence | 95% |
| Refinance | Cash-out, one-unit principal residence | 80% |
| Refinance | Cash-out, two to four units, second home or investment | 75% |
| Combined LTV | Maximum contribution |
|---|---|
| above 90 percent | 3% of the sales price |
| 75.01 to 90 percent | 6% of the sales price |
| 75 percent or less | 9% of the sales price |
| investment property (any) | 2% of the sales price |
| Event | Waiting period |
|---|---|
| Chapter 7 or 11 bankruptcy | four years from discharge or dismissal (two years with documented extenuating circumstances) |
| Chapter 13 bankruptcy | two years from discharge; four years from dismissal (two with extenuating circumstances) |
| Multiple bankruptcy filings | five years when more than one filing within the past seven years |
| Foreclosure | seven years (three with extenuating circumstances, then limited to a principal residence or second home at 90 percent LTV, purchase or limited cash-out) |
| Deed-in-lieu, short sale or mortgage charge-off | four years (two with extenuating circumstances) |
Mortgage insurance: Fannie Mae reports that private mortgage insurance typically ranged from 0.58%–1.86% of the loan amount a year; the premium on a specific loan is priced by the insurer on the score, the leverage, and the coverage, and is never quoted here. Gifts from relatives may fund the entire down payment on a one-unit principal residence. HomeReady and Home Possible lend to 97% with income at or below 80% of the area median; HomeOne lends to the same leverage with a first-time buyer and no income limit.
Current conventional snapshot · updated October 3, 2026 · principal residences occupied within sixty days, second homes, and one- to four-unit investment properties · conforming limits apply by county and are confirmed by a Lendmire loan officer · above the limit, see the jumbo program · no prepayment penalty · Lendmire is a broker, never the lender.
Not a commitment to lend, not an offer of credit, not a quote. The figures shown are current conforming program parameters and wholesale overlays that change without notice and apply only after full underwriting of the borrower and the property; the mortgage insurance range is Fannie Mae’s published typical range and the premium on any loan is set by the insurer. Conforming loan limits apply by county. Lendmire is a mortgage broker licensed in sixteen states for consumer mortgages, never the lender. NMLS #2371349.
What a conventional loan is — and how the file is qualified.
Four rules shape a Richmond conventional file: leverage by occupancy and buyer, credit scoring that prices rather than gates, mortgage insurance that cancels, and ratios set by the underwriting path. Each is explained below with the reason behind it.
For the program overview, see Lendmire’s conventional loan program, or the statewide guide at Conventional Loans in California; for the mortgage insurance cancellation rules, see the CFPB.
Leverage by occupancy and buyer
Leverage on a Richmond conventional loan is a table rather than a single number: purchase against refinance, principal residence against second home against rental, one unit against several. Each cell has its own maximum, a cash-out refinance sits below the purchase ceiling for the same occupancy, and the snapshot shows the whole table.
Credit scores and automated underwriting
The automated system, DU on the Fannie Mae side and LPA on the Freddie Mac side, reads the whole credit file rather than a single number: the score, the depth of history, the recent events, and the seasoning after any derogatory event. The score it uses with more than one borrower is the average of the median scores.
Mortgage insurance that cancels
Twenty percent down means no mortgage insurance at all, and anything less means insurance for a while. The calculator on this page shows the Richmond payment with the estimated premium and the payment after it ends, along with the month on the amortization schedule when the request and automatic thresholds arrive.
Ratios, reserves, and the DU finding
Reserves are measured in months of the total housing payment and set by the finding, the occupancy, and the number of financed properties; a Richmond second-home or investment file carries more than a principal residence. Income needs a two-year history and a reasonable expectation of continuing.
Every input below is yours: the Richmond price, the down payment, the buyer type, the term, the rate, the insurance estimate, and the escrows. The thresholds and the ratio ceiling come from the program; the payment, the insurance, and the cancellation month follow from the arithmetic.
Where Richmond buyers borrow — and how a conforming loan fits.
Start with the market, then the file. The Richmond figures below set the backdrop for a conventional purchase: who owns, what homes are worth on the latest estimate, and what households earn, which together decide what a first-time buyer’s down payment and payment look like locally.
Citywide figures provide general market context, not an appraisal or an income calculation. Income sets the ratio, value sets the loan and the premium, and the down payment sets the leverage. The Census describes the first two for the market; the file supplies all three for the borrower.
Data sources: U.S. Census Bureau — ACS 5-Year (2024) housing and population estimates, including tenure, home values, gross rents, and household income.
Distinct Richmond neighborhoods, distinct conventional files.
Where Richmond buyers shop, and what the conforming file turns on in each place: the occupancy, the property type the appraiser sees, the project review it needs, and the price the ratio has to carry.
Condominiums and townhomes
Townhomes in Richmond finance like houses when they are fee simple and like condominiums when they are organized as one; the lender settles which before the appraisal, and the leverage follows the occupancy either way. Roughly 22,321 Richmond households own their homes on the latest Census estimate — 55% of all households, the pool a conventional purchase joins.
Two-to-four-unit homes
Richmond duplexes and small apartment houses are conventional purchases at the multi-unit leverage in the snapshot when the buyer occupies one unit, with rent from the other units counted toward qualifying under the agencies’ rules. The median owner-occupied home value in Richmond runs near $668,200 on the latest Census estimate.
Established close-in neighborhoods
Renovated and unrenovated homes sit side by side in Richmond’s established neighborhoods, and the appraisal values each on comparable sales. The leverage, the insurance, and the ratio do not change with the age of the house. On a one-unit principal residence at Richmond’s median value, the first-time buyer’s minimum down payment comes to about $20,000 and the standard minimum to about $33,400 — before closing costs, and before the mortgage insurance that comes with either; a second home, a multi-unit home, or a rental starts higher, as the leverage table shows.
Newer infill and recent construction
On recent construction in Richmond the appraisal is usually uneventful and the arithmetic decides: whether the loan fits under the conforming limit, and whether the ratio carries the price once the insurance is added at the leverage chosen. Median household income in Richmond sits near $95,391 on the latest Census estimate.
Investor and second-home purchases
A second home in Richmond, occupied part of the year and never run as a rental business, is a conventional file at the second-home leverage with deeper reserves and part of the down payment from the buyer’s own funds. About 45% of Richmond’s households rent — roughly 18,485 renter households on the latest Census estimate.
Higher-value homes
On Richmond’s higher-value homes, a conventional loan hits the conforming limit first. Buyers over it can bring a larger down payment to fit under it, use the high-balance range where the county has one, or choose the jumbo program. A loan officer confirms the current limit before the offer. Richmond is home to about 116K people.
What the program accepts is the same everywhere in Richmond: houses, warrantable condominiums, planned developments, manufactured homes that meet the agencies’ rules, two- to four-unit homes, second homes, and investment property, each at its own leverage. What it declines is the non-warrantable project and the loan above the conforming limit, which belong to other programs.
Four ways Richmond buyers put a conforming loan to work.
The conventional loan is one of the broadest mortgage programs there is: it buys a first home with a small down payment, a move-up home with cancellable insurance, a second home, and a rental, and it refinances all of them. The cards below are the uses that bring Richmond borrowers to it most.
Refinance or take cash out
A Richmond owner can refinance a conventional loan two ways: a limited cash-out refinance to the rate-and-term leverage in the snapshot, or a cash-out refinance to the lower cash-out leverage after the seasoning period, on a principal residence, second home, or rental at each occupancy’s own limit.
Buy a first home at the first-time-buyer minimum
For a Richmond first purchase, the conventional route pairs the agencies’ lowest down payment with insurance that cancels and, on the monthly structure, no upfront premium; the file is qualified on the score, the ratio, the reserves, and the automated finding, and a family gift may fund the whole down payment.
Buy a second home
A second home in Richmond is a conventional file with its own leverage and reserve rules: more down than a principal residence, the payment on the existing home counted in the ratio, and a property the owner occupies part of the year rather than rents full time.
Buy with twenty percent down and no insurance
The move-up Richmond buyer selling one home and bringing twenty percent to the next usually lands here: no mortgage insurance, the strongest cost tier the score earns, and a loan the automated system reviews with the equity brought forward counted in the file.
Estimate the payment on a Richmond price before requesting a quote.
This is what a Richmond conventional purchase costs each month at the leverage you choose, with the insurance shown as a separate line and then removed: the calculator finds the month on the schedule when the balance reaches the request threshold and the month it reaches the automatic threshold, and shows the payment on each side. The rate shown is the weekly Freddie Mac average, editable, and not a quote.
Richmond conventional payment estimate
The defaults are a Richmond starting point, not your purchase: put in the real price, the real down payment, and the real escrows.
Editable benchmark: 7.28% as of October 1, 2026 · Freddie Mac 30-year average via FRED®. A conventional market reference, not a conventional loan quote.
Estimate seeded at the low end of Fannie Mae’s published range (0.58%–1.86% a year); the insurer prices the actual premium on the score and the leverage. Applies only above 80% loan-to-value.
Illustrative starting assumptions: a $670,000 price near Richmond’s median owner-occupied home value, the first-time buyer’s minimum down payment, a thirty-year term at the current Freddie Mac benchmark, mortgage insurance at the low end of Fannie Mae’s published range, property taxes and insurance estimated for California (U.S. Census Bureau). Every field is editable.
Illustrative estimate only — not a Loan Estimate, approval, quote, or commitment to lend. The rate field carries the weekly Freddie Mac thirty-year conventional benchmark, a market reference and not a conventional loan quote; your rate is set by the lender at lock. The mortgage insurance figure is an editable estimate seeded from Fannie Mae’s published typical range, not a premium quote; the insurer prices the actual premium, and the cancellation month assumes scheduled payments with no extra principal and no change in value. Taxes, insurance and dues are editable estimates; closing costs are not included. Conforming loan limits apply by county. Licensed in sixteen states for consumer mortgages.
Same buyer, three very different closings.
Choosing among conventional, FHA, and VA in Richmond is really choosing an insurance structure and a credit standard at the same time. Each is laid out below with the buyer it fits.
Conventional, FHA, or VA.
This program offers a low down payment for first-time buyers, insurance set by the score and removed once the balance falls below the threshold, and no upfront premium on the monthly structure. Of the three programs compared here, it alone finances second homes and investment property. The cost is a credit standard that prices a weak score heavily.
FHA’s leverage is high and its credit standard is forgiving, but its insurance is priced by schedule rather than by score and does not cancel on a full-leverage thirty-year loan. A Richmond buyer comparing the two sees the premium line stay on FHA and disappear on conventional. See Lendmire’s FHA loan program.
For an eligible veteran, service member, or surviving spouse, the VA loan drops the down payment and monthly insurance for a one-time funding fee that many disabled veterans do not pay. Where eligible, it usually beats conventional for a Richmond principal residence; conventional still wins the second home and rental. See Lendmire’s VA loan program.
Conventional for the solid score, the move-up buyer, the second home, and the rental; FHA for the modest score and the small investment; VA for the eligible borrower buying a principal residence. The Richmond file is priced on all three before one is recommended. Above the conforming limit, see the jumbo loan program.
What to prepare for a Richmond scenario review.
What a lender reads on a Richmond conventional loan, and what you can have ready before anyone asks.
This is a general preparation guide, not a universal checklist. The selected lender may request additional information based on the transaction, the property, the automated underwriting finding, and the income picture. Nothing here is legal or tax advice.
Local details that can change the loan.
A handful of details decide whether a Richmond conventional file closes as planned, closes at a different cost, or stalls. These are the ones that come up most.
Use these checks to keep the Richmond file clean and fundable.
Before asking for a quote, know three answers: how much insurance the leverage carries and for how long, what the score does to the price, and whether the property and the loan amount fit the conforming program.
- Plan the insurance: the premium is priced on the score and the leverage inside the published range.
- Confirm the score: the lender’s report sets the decision score; multiple borrowers use the average of the median scores.
- Know the seasoning: documented extenuating circumstances can shorten several periods.
Mortgage insurance: how much, and until when
Cancellation on request needs a good payment history, no subordinate liens, and no decline in value; automatic termination needs only that the loan be current. A Richmond owner whose home has gained value may also ask the servicer to recognize the current value under its own rules, which is a servicer decision rather than a program right.
The score sets the cost
The score does two jobs on a Richmond file: it feeds the automated assessment alongside the rest of the credit file, and it sets the cost of the loan and the insurance. A buyer close to a cost tier sometimes gains more from a short wait and a paid-down balance than from any other change.
Waiting periods after a credit event
The agencies season credit events rather than barring them: each bankruptcy chapter, a foreclosure, a deed-in-lieu, and a short sale carry their own period, shortened by documented extenuating circumstances. The snapshot table shows each one for a Richmond buyer planning the timing.
Ratios, reserves, and the finding
The total ratio counts the full housing payment, insurance included, plus every other obligation, against gross income, up to the automated ceiling in the snapshot; a manual file is held to the lower pair. The finding also sets the reserves, and a Richmond buyer with other financed properties carries more of them.
The appraisal and value acceptance
A conventional appraisal values the Richmond home and reports on condition without a HUD or VA property standard; the home must be safe, sound, and marketable. The automated system sometimes offers value acceptance or an appraisal waiver, in which case no appraisal is ordered and the file closes on the system’s valuation.
From a Richmond pre-approval to keys in hand.
A conventional purchase runs in a fixed order: pre-approval through the automated system on the score, the ratio, and the reserves; contract and appraisal or value acceptance; underwriting that verifies what the finding assumed; and closing with the insurance structure set. Here is that order for a Richmond buyer.
Pre-approval
Start with the score, the income, the down payment, and the occupancy. A Lendmire loan officer runs the automated system, confirms the leverage and the insurance for the down payment chosen, checks the loan against the conforming limit, compares the structure with FHA and VA on the same numbers, and provides the terms in writing.
Contract and appraisal
With the contract signed, the lender orders the appraisal, or accepts the value the automated system offers where a waiver applies. Seller contributions are checked against the cap for the leverage, and a condominium’s project documents are collected for review before the file moves on.
Underwriting
Underwriting on a Richmond conventional file verifies the finding: the documents behind income and assets, the source of the down payment, the project review, and the insurance commitment for the leverage. Conditions are cleared and the approval is issued with its terms.
Closing
At closing the loan funds at the chosen leverage, mortgage insurance starts with the first payment if the loan is above the threshold, and escrows for taxes and insurance are set up. A Richmond buyer signs the note and security instrument, occupies the home within the occupancy window, and the agency buys the loan.
A brokerage that prices the whole market.
A single lender prices a conventional loan one way; a brokerage with several wholesale programs prices it several ways and shows a Richmond buyer which one costs less on the same score and leverage, with the insurance quoted by the insurer rather than guessed.
Several programs, one set of numbers
A lender with one rate sheet sells that sheet; a brokerage with several can say which fits. For a Richmond buyer with a strong score that is usually a conventional loan on the program whose cost is lowest for that file; for a modest score it may be FHA, and the arithmetic decides.
The insurance explained before the offer
The insurance is the program’s cost and the cancellation rules are its advantage, and Lendmire explains both first rather than last: how much the premium is, which structure fits, and when it ends for a Richmond buyer at the price in hand.
Licensed, consumer-purpose, in writing
Lendmire is licensed in sixteen states for consumer mortgages, each owner-occupied loan is a consumer-purpose transaction with a full set of disclosures, and every figure a Richmond buyer relies on, from leverage to premium to final terms, comes in writing from a licensed loan officer.
Trusted by buyers & families alike.
Richmond conventional loan FAQs
Plain answers to the questions Richmond buyers ask most about conventional loans, in the order they usually ask them.
What is a conventional loan, and who is it for?
The general-purpose mortgage: conforming to the agencies’ guides, priced on the credit score, insured privately only while the leverage is above the threshold. It is the program most Richmond buyers compare first and, of the three compared here, the one that reaches a second home or an investment property.
How much do I need to put down on a conventional loan in Richmond?
A small share of the price for a first-time buyer, a little more for a repeat buyer, and twenty percent to skip the insurance. A loan officer turns the percentages into dollars on the price you choose.
What credit score do I need for a conventional loan?
A conventional loan prices credit rather than simply gating it. The practical floor is the wholesale overlay in the snapshot; the agencies’ own minimum applies only to manual underwriting. Above the floor, the premium and the loan-level adjustments fall as the score rises.
How does private mortgage insurance work, and when does it end?
Above the threshold the insurance is part of the Richmond payment; below it, there is none. Fannie Mae publishes the typical annual range shown in the snapshot, the insurer prices the actual premium, and the federal cancellation rules end it as equity arrives.
What is the conforming loan limit in Richmond?
Ask a loan officer for the county’s current limit; it changes yearly and by unit count. Above it, a Richmond purchase is still possible with a larger down payment on a conforming loan or on a jumbo loan.
What debt-to-income ratio does a conventional loan allow?
Two paths, all of them total ratios: a single higher ceiling for a file the automated system approves, and for manual underwriting a lower figure, with a higher one available when the matrix’s credit and reserve criteria are met. The housing payment counted includes the insurance while it applies, which is why cancellation lowers the ratio as well as the payment.
Should I choose a conventional loan or FHA?
Run both. A strong score and a down payment above the minimum point to conventional, where the insurance is smaller and ends; a modest score and the smallest possible investment point to FHA. The comparison is made on the actual payment and the cash to close.
Can I buy a rental property with a conventional loan?
Yes, one to four units, at the investment leverage in the snapshot table, with the rental income counted toward qualifying under the agencies’ rules and reserves required for each financed property. The agencies also cap the number of financed properties one borrower may hold, and the loan is written under their investment-property rules rather than as an investor DSCR loan.
What happens after my Richmond offer is accepted?
Appraisal first, then underwriting, then conditions, then closing. The appraisal or the value acceptance sets the value; the underwriter verifies what the finding assumed; the closing funds the loan at the leverage chosen and starts a payment with the insurance line if one applies.
Can the down payment be a gift?
It can, from an acceptable donor, for all of it on a one-unit principal residence; the donor must be a relative or similar, the letter must state no repayment is expected, and the transfer must be documented. Gifts may also fund closing costs and reserves.
The Richmond conforming file, priced across the market and explained plainly.
A Richmond conventional purchase starts with three questions: the score, the down payment, and the occupancy. Lendmire answers them, prices the programs, and writes up the one that fits.
This guide covers Richmond — for the statewide guidelines, markets, and scenarios, see Conventional Loans in California, part of Lendmire’s conventional loan program.
Nearby markets in California: Berkeley · San Rafael · Vallejo · Novato · Oakland · Alameda · Walnut Creek · Daly City
Related programs: FHA Loans · Jumbo Loans · Refinance Loans